- [ 11.857454] mmc1: error -16 whilst initialising SDIO card
- [ 12.358375] dwmmc_rockchip fe310000.dwmmc: Busy; trying anyway
- [ 12.358926] mmc_host mmc1: Timeout sending command (cmd 0x202000 arg 0x0 status 0x0)
- [ 12.373470] mmc_host mmc1: Bus speed (slot 0) = 200000Hz (slot req 200000Hz, actual 200000HZ div = 0)
复制代码
- [ 3.865965] ======== PULL WL_REG_ON(-1) HIGH! ========
- [ 3.865968] [WLAN_RFKILL]: rockchip_wifi_power: 1
- [ 3.865972] [BT_RFKILL]: rfkill_get_bt_power_state: rfkill-bt driver has not Successful initialized
- [ 3.865975] [WLAN_RFKILL]: wifi turn on power. -1
- [ 3.879482] mmc_host mmc2: Bus speed (slot 0) = 200000Hz (slot req 200000Hz, actual 200000HZ div = 0)
- [ 3.918940] =======================================================
- [ 3.922133] ==== Launching Wi-Fi driver! (Powered by Rockchip) ====
- [ 3.925331] =======================================================
- [ 3.928559] Realtek 8822CS SDIO WiFi driver (Powered by Rockchip,Ver v5.7.3_32588.20190319_COEX20190318-0a0a) init.
- [ 3.934962] [WLAN_RFKILL]: rockchip_wifi_power: 1
- [ 3.938174] [BT_RFKILL]: rfkill_get_bt_power_state: rfkill-bt driver has not Successful initialized
- [ 3.944725] [WLAN_RFKILL]: wifi turn on power. -1
- [ 3.948080] mmc2:mmc host rescan start!
- [ 3.951362] RTW: module init start
- [ 3.954605] RTW: rtl88x2cs v5.7.3_32588.20190319_COEX20190318-0a0a
- [ 3.958155] RTW: build time: Mar 23 2020 04:16:14
- [ 3.961598] RTW: rtl88x2cs BT-Coex version = COEX20190318-0a0a
- [ 3.965179] RTW: ## Calling platform_driver_register
- [ 4.167423] wifi_platform_bus_enumerate device present 1
- [ 4.180247] ======== Card detection to detect SDIO card! ========
- [ 4.192958] mmc2:mmc host rescan start!
复制代码
欢迎光临 Toybrick (https://t.rock-chips.com/) | Powered by Discuz! X3.3 |