Toybrick

标题: 求RK3399Pro的android详细编译和固件下载方法 [打印本页]

作者: wangjian1937 时间: 2019-11-29 18:04
标题: 求RK3399Pro的android详细编译和固件下载方法
请问有没有RK3399Pro的android编译方法和下载方法，RK3399Pro的开发板android和windows双系统，想刷android版本的固件

但是按照官方提供的方法[url]http://t.rock-chips.com/wiki.php?mod=view&id=34[/url] 刷机后无法启动。
无法确定是固件的问题还是烧录的问题。
固件是下载的TB-RK3399ProD的源码执行./build.sh -b prod 命令  然后用Linux_Pack_Firmware工具中的updateimg.sh脚本生成的update.img

然后用AndroidTools_Release_V2.64工具烧录的。
烧录失败后用升级工具摖除flash  但是还是报下面的错误。
日志：
gpll 800000 KHz
  npll 600000 KHz
  vpll 24000 KHz
  aclk_perihp 133333 KHz
  hclk_perihp 66666 KHz
  pclk_perihp 33333 KHz
  aclk_perilp0 266666 KHz
  hclk_perilp0 88888 KHz
  pclk_perilp0 44444 KHz
  hclk_perilp1 100000 KHz
  pclk_perilp1 50000 KHz
Net: No ethernet found.
Hit key to stop autoboot('CTRL+C'):  0
ANDROID: reboot reason: "recovery"
TEEC: verify [0] fail, cleanning ....TEEC: verify [1] fail, cleanning ....TEEC: verify [2] fail, cleanning ....TEEC: verify [3] fail, cleanning ....TEEC: verify [4] fail, cleanning ....TEEC: verify [5] fail, cleanning ....TEEC: verify [6] fail, cleanning ....TEEC: verify [7] fail, cleanning ....TEEC: verify [8] fail, cleanning ....TEEC: verify [9] fail, cleanning ....TEEC: verify [10] fail, cleanning ....TEEC: verify [11] fail, cleanning ....TEEC: verify [12] fail, cleanning ....TEEC: verify [13] fail, cleanning ....TEEC: verify [14] fail, cleanning ....TEEC: verify [15] fail, cleanning ....TEEC: verify [16] fail, cleanning ....TEEC: verify [17] fail, cleanning ....TEEC: verify [18] fail, cleanning ....TEEC: verify [19] fail, cleanning ....TEEC: verify [20] fail, cleanning ....TEEC: verify [21] fail, cleanning ....TEEC: verify [22] fail, cleanning ....TEEC: verify [23] fail, cleanning ....TEEC: verify [24] fail, cleanning ....TEEC: verify [25] fail, cleanning ....TEEC: verify [26] fail, cleanning ....TEEC: verify [27] fail, cleanning ....TEEC: verify [28] fail, cleanning ....TEEC: verify [29] fail, cleanning ....TEEC: verify [30] fail, cleanning ....TEEC: verify [31] fail, cleanning ....TEEC: verify [32] fail, cleanning ....TEEC: verify [33] fail, cleanning ....TEEC: verify [34] fail, cleanning ....TEEC: verify [35] fail, cleanning ....TEEC: verify [36] fail, cleanning ....TEEC: verify [37] fail, cleanning ....TEEC: verify [38] fail, cleanning ....TEEC: verify [39] fail, cleanning ....TEEC: verify [40] fail, cleanning ....TEEC: verify [41] fail, cleanning ....TEEC: verify [42] fail, cleanning ....TEEC: verify [43] fail, cleanning ....TEEC: verify [44] fail, cleanning ....TEEC: verify [45] fail, cleanning ....TEEC: verify [46] fail, cleanning ....TEEC: verify [47] fail, cleanning ....TEEC: verify [48] fail, cleanning ....TEEC: verify [49] fail, cleanning ....TEEC: verify [50] fail, cleanning ....TEEC: verify [51] fail, cleanning ....TEEC: verify [52] fail, cleanning ....TEEC: verify [53] fail, cleanning ....TEEC: verify [54] fail, cleanning ....TEEC: verify [55] fail, cleanning ....TEEC: verify [56] fail, cleanning ....TEEC: verify [57] fail, cleanning ....TEEC: verify [58] fail, cleanning ....TEEC: verify [59] fail, cleanning ....TEEC: verify [60] fail, cleanning ....TEEC: verify [61] fail, cleanning ....TEEC: verify [62] fail, cleanning ....TEEC: verify [63] fail, cleanning ....TEEC: verify [64] fail, cleanning ....TEEC: verify [65] fail, cleanning ....TEEC: verify [66] fail, cleanning ....TEEC: verify [67] fail, cleanning ....TEEC: verify [68] fail, cleanning ....TEEC: verify [69] fail, cleanning ....TEEC: verify [70] fail, cleanning ....TEEC: verify [71] fail, cleanning ....TEEC: verify [72] fail, cleanning ....TEEC: verify [73] fail, cleanning ....TEEC: verify [74] fail, cleanning ....TEEC: verify [75] fail, cleanning ....TEEC: verify [76] fail, cleanning ....TEEC: verify [77] fail, cleanning ....TEEC: verify [78] fail, cleanning ....TEEC: verify [79] fail, cleanning ....TEEC: verify [80] fail, cleanning ....TEEC: verify [81] fail, cleanning ....TEEC: verify [82] fail, cleanning ....TEEC: verify [83] fail, cleanning ....TEEC: verify [84] fail, cleanning ....TEEC: verify [85] fail, cleanning ....TEEC: verify [86] fail, cleanning ....TEEC: verify [87] fail, cleanning ....TEEC: verify [88] fail, cleanning ....TEEC: verify [89] fail, cleanning ....TEEC: verify [90] fail, cleanning ....TEEC: verify [91] fail, cleanning ....TEEC: verify [92] fail, cleanning ....TEEC: verify [93] fail, cleanning ....TEEC: verify [94] fail, cleanning ....TEEC: verify [95] fail, cleanning ....TEEC: verify [96] fail, cleanning ....TEEC: verify [97] fail, cleanning ....TEEC: verify [98] fail, cleanning ....TEEC: verify [99] fail, cleanning ....TEEC: verify [100] fail, cleanning ....TEEC: verify [101] fail, cleanning ....TEEC: verify [102] fail, cleanning ....TEEC: verify [103] fail, cleanning ....TEEC: verify [104] fail, cleanning ....TEEC: verify [105] fail, cleanning ....TEEC: verify [106] fail, cleanning ....TEEC: verify [107] fail, cleanning ....TEEC: verify [108] fail, cleanning ....TEEC: verify [109] fail, cleanning ....TEEC: verify [110] fail, cleanning ....TEEC: verify [111] fail, cleanning ....TEEC: verify [112] fail, cleanning ....TEEC: verify [113] fail, cleanning ....TEEC: verify [114] fail, cleanning ....TEEC: verify [115] fail, cleanning ....TEEC: verify [116] fail, cleanning ....TEEC: verify [117] fail, cleanning ....TEEC: verify [118] fail, cleanning ....TEEC: verify [119] fail, cleanning ....TEEC: verify [120] fail, cleanning ....TEEC: verify [121] fail, cleanning ....TEEC: verify [122] fail, cleanning ....TEEC: verify [123] fail, cleanning ....TEEC: verify [124] fail, cleanning ....TEEC: verify [125] fail, cleanning ....TEEC: verify [126] fail, cleanning ....TEEC: verify [127] fail, cleanning ....Not AVB images, AVB skip
** Invalid Android Image header **
Android image load failed
Android boot failed, error -1.
boot mode: recovery
=Booting Rockchip format image=
Could not found misc partition
Card did not respond to voltage select!
mmc_init: -95, time 9
switch to partitions #0, OK
mmc0(part 0) is current device
Failed to mount ext2 filesystem...
** Unrecognized filesystem type **
starting USB...
USB0: Register 2000140 NbrPorts 2
Starting the controller
USB XHCI 1.10
USB1: Register 2000140 NbrPorts 2
Starting the controller
USB XHCI 1.10
scanning bus 0 for devices... 1 USB Device(s) found
scanning bus 1 for devices... 1 USB Device(s) found
   scanning usb for storage devices... 0 Storage Device(s) found

Device 0: unknown device
No ethernet found.
missing environment variable: pxeuuid
missing environment variable: bootfile
Retrieving file: pxelinux.cfg/00000000
No ethernet found.
missing environment variable: bootfile
Retrieving file: pxelinux.cfg/0000000
No ethernet found.
missing environment variable: bootfile
Retrieving file: pxelinux.cfg/000000
No ethernet found.
missing environment variable: bootfile
Retrieving file: pxelinux.cfg/00000
No ethernet found.
missing environment variable: bootfile
Retrieving file: pxelinux.cfg/0000
No ethernet found.
missing environment variable: bootfile
Retrieving file: pxelinux.cfg/000
No ethernet found.
missing environment variable: bootfile
Retrieving file: pxelinux.cfg/00
No ethernet found.
missing environment variable: bootfile
Retrieving file: pxelinux.cfg/0
No ethernet found.
missing environment variable: bootfile
Retrieving file: pxelinux.cfg/default-arm-rockchip
No ethernet found.
missing environment variable: bootfile
Retrieving file: pxelinux.cfg/default-arm
No ethernet found.
missing environment variable: bootfile
Retrieving file: pxelinux.cfg/default
No ethernet found.
Config file not found
No ethernet found.
=> DDR Version 1.22 20190506
In
Channel 0: LPDDR3, 800MHz
CS = 0
MR0=0xD8
MR1=0xD8
MR2=0xD8
MR3=0xD8
MR4=0x3
MR5=0x6
MR6=0x4
MR7=0x0
MR8=0x1F
MR9=0x1F
MR10=0x1F
MR11=0x1F
MR12=0x1F
MR13=0x1F
MR14=0x1F
MR15=0x1F
MR16=0x1F
CS = 1
MR0=0xD8
MR1=0xD8
MR2=0xD8
MR3=0xD8
MR4=0x3
MR5=0x6
MR6=0x4
MR7=0x0
MR8=0x1F
MR9=0x1F
MR10=0x1F
MR11=0x1F
MR12=0x1F
MR13=0x1F
MR14=0x1F
MR15=0x1F
MR16=0x1F
Bus Width=32 Col=10 Bank=8 Row=15/15 CS=2 Die Bus-Width=32 Size=2048MB
Channel 1: LPDDR3, 800MHz
CS = 0
MR0=0xD8
MR1=0xD8
MR2=0xD8
MR3=0xD8
MR4=0x3
MR5=0x6
MR6=0x4
MR7=0x0
MR8=0x1F
MR9=0x1F
MR10=0x1F
MR11=0x1F
MR12=0x1F
MR13=0x1F
MR14=0x1F
MR15=0x1F
MR16=0x1F
CS = 1
MR0=0xD8
MR1=0xD8
MR2=0xD8
MR3=0xD8
MR4=0x3
MR5=0x6
MR6=0x4
MR7=0x0
MR8=0x1F
MR9=0x1F
MR10=0x1F
MR11=0x1F
MR12=0x1F
MR13=0x1F
MR14=0x1F
MR15=0x1F
MR16=0x1F
Bus Width=32 Col=10 Bank=8 Row=15/15 CS=2 Die Bus-Width=32 Size=2048MB
256B stride
ch 0 ddrconfig = 0x101, ddrsize = 0x2020
ch 1 ddrconfig = 0x101, ddrsize = 0x2020
pmugrf_os_reg[2] = 0x3AA0DAA0, stride = 0xD
OUT
Boot1: 2018-08-06, version: 1.15
CPUId = 0x0
ChipType = 0x10, 217
SdmmcInit=2 0
BootCapSize=100000
UserCapSize=29820MB
FwPartOffset=2000 , 100000
mmc0:cmd8,20
mmc0:cmd5,20
mmc0:cmd55,20
mmc0:cmd1,20
mmc0:cmd8,20
mmc0:cmd5,20
mmc0:cmd55,20
mmc0:cmd1,20
mmc0:cmd8,20
mmc0:cmd5,20
mmc0:cmd55,20
mmc0:cmd1,20
SdmmcInit=0 1
StorageInit ok = 67650
SecureMode = 0
SecureInit read PBA: 0x4
SecureInit read PBA: 0x404
SecureInit read PBA: 0x804
SecureInit read PBA: 0xc04
SecureInit read PBA: 0x1004
SecureInit read PBA: 0x1404
SecureInit read PBA: 0x1804
SecureInit read PBA: 0x1c04
SecureInit ret = 0, SecureMode = 0
GPT part:  0, name:          uboot, start:0x2000, size:0x2000
GPT part:  1, name:          trust, start:0x4000, size:0x2000
GPT part:  2, name:          misc, start:0x6000, size:0x2000
GPT part:  3, name:          boot, start:0x8000, size:0x10000
GPT part:  4, name:       recovery, start:0x18000, size:0x20000
GPT part:  5, name:          backup, start:0x38000, size:0x38000
GPT part:  6, name:       security, start:0x70000, size:0x2000
GPT part:  7, name:          cache, start:0x72000, size:0x100000
GPT part:  8, name:          system, start:0x172000, size:0x500000
GPT part:  9, name:       metadata, start:0x672000, size:0x8000
GPT part: 10, name:          vendor, start:0x67a000, size:0x100000
GPT part: 11, name:             oem, start:0x77a000, size:0x100000
GPT part: 12, name:             frp, start:0x87a000, size:0x400
GPT part: 13, name:       userdata, start:0x87a400, size:0x31c3bdf
find partition:uboot OK. first_lba:0x2000.
find partition:trust OK. first_lba:0x4000.
LoadTrust Addr:0x4000
No find bl30.bin
Load uboot, ReadLba = 2000
Load OK, addr=0x200000, size=0xeec1c
RunBL31 0x10000
NOTICE:  BL31: v1.3(debug):51f2096
NOTICE:  BL31: Built : 16:24:31, May  6 2019
NOTICE:  BL31: Rockchip release version: v1.1
INFO: GICv3 with legacy support detected. ARM GICV3 driver initialized in EL3
INFO: Using opteed sec cpu_context!
INFO: boot cpu mask: 0
INFO: plat_rockchip_pmu_init(1181): pd status 3e
INFO: BL31: Initializing runtime services
INFO: BL31: Initializing BL32
INF [0x0] TEE-CORE:init_primary_helper:337: Initializing (1.1.0-217-g62d4d856 #81 Mon May 13 11:37:54 UTC 2019 aarch64)

INF [0x0] TEE-CORE:init_primary_helper:338: Release version: 1.2

INF [0x0] TEE-CORE:init_teecore:83: teecore inits done
INFO: BL31: Preparing for EL3 exit to normal world
INFO: Entry point address = 0x200000
INFO: SPSR = 0x3c9

U-Boot 2017.09-gafd25a447a (Nov 29 2019 - 09:59:11 +0800)

Model: Rockchip RK3399 Evaluation Board
PreSerial: 2
DRAM:  3.8 GiB
Sysmem: init
Relocation Offset is: f5bd6000
Using default environment

dwmmc@fe320000: 1, sdhci@fe330000: 0
Card did not respond to voltage select!
mmc_init: -95, time 9
switch to partitions #0, OK
mmc0(part 0) is current device
Bootdev: mmc 0
MMC0: HS400, 150Mhz
PartType: EFI
boot mode: recovery
init_resource_list: failed to get resource part, ret=-1
Read kernel dtb failed, ret=-19
Model: Rockchip RK3399 Evaluation Board
rockchip_set_serialno: could not find efuse device
download key pressed... entering download mode...
RKUSB: LUN 0, dev 0, hwpart 0, sector 0x0, count 0x3a3e000
\WARèœ DR Version 1.22 20190506
In
soft reset
SRX
Channel 0: LPDDR3, 800MHz
CS = 0
MR0=0xD8
MR1=0xD8
MR2=0xD8
MR3=0xD8
MR4=0x3
MR5=0x6
MR6=0x4
MR7=0x0
MR8=0x1F
MR9=0x1F
MR10=0x1F
MR11=0x1F
MR12=0x1F
MR13=0x1F
MR14=0x1F
MR15=0x1F
MR16=0x1F
CS = 1
MR0=0xD8
MR1=0xD8
MR2=0xD8
MR3=0xD8
MR4=0x3
MR5=0x6
MR6=0x4
MR7=0x0
MR8=0x1F
MR9=0x1F
MR10=0x1F
MR11=0x1F
MR12=0x1F
MR13=0x1F
MR14=0x1F
MR15=0x1F
MR16=0x1F
Bus Width=32 Col=10 Bank=8 Row=15/15 CS=2 Die Bus-Width=32 Size=2048MB
Channel 1: LPDDR3, 800MHz
CS = 0
MR0=0xD8
MR1=0xD8
MR2=0xD8
MR3=0xD8
MR4=0x3
MR5=0x6
MR6=0x4
MR7=0x0
MR8=0x1F
MR9=0x1F
MR10=0x1F
MR11=0x1F
MR12=0x1F
MR13=0x1F
MR14=0x1F
MR15=0x1F
MR16=0x1F
CS = 1
MR0=0xD8
MR1=0xD8
MR2=0xD8
MR3=0xD8
MR4=0x3
MR5=0x6
MR6=0x4
MR7=0x0
MR8=0x1F
MR9=0x1F
MR10=0x1F
MR11=0x1F
MR12=0x1F
MR13=0x1F
MR14=0x1F
MR15=0x1F
MR16=0x1F
Bus Width=32 Col=10 Bank=8 Row=15/15 CS=2 Die Bus-Width=32 Size=2048MB
256B stride
ch 0 ddrconfig = 0x101, ddrsize = 0x2020
ch 1 ddrconfig = 0x101, ddrsize = 0x2020
pmugrf_os_reg[2] = 0x3AA0DAA0, stride = 0xD
OUT
Boot1: 2018-08-06, version: 1.15
CPUId = 0x0
ChipType = 0x10, 276
SdmmcInit=2 0
BootCapSize=100000
UserCapSize=29820MB
FwPartOffset=2000 , 100000
mmc0:cmd8,20
mmc0:cmd5,20
mmc0:cmd55,20
mmc0:cmd1,20
mmc0:cmd8,20
mmc0:cmd5,20
mmc0:cmd55,20
mmc0:cmd1,20
mmc0:cmd8,20
mmc0:cmd5,20
mmc0:cmd55,20
mmc0:cmd1,20
SdmmcInit=0 1
StorageInit ok = 68686
SecureMode = 0
SecureInit read PBA: 0x4
SecureInit read PBA: 0x404
SecureInit read PBA: 0x804
SecureInit read PBA: 0xc04
SecureInit read PBA: 0x1004
SecureInit read PBA: 0x1404
SecureInit read PBA: 0x1804
SecureInit read PBA: 0x1c04
SecureInit ret = 0, SecureMode = 0
GPT part:  0, name:          uboot, start:0x2000, size:0x2000
GPT part:  1, name:          trust, start:0x4000, size:0x2000
GPT part:  2, name:          misc, start:0x6000, size:0x2000
GPT part:  3, name:          boot, start:0x8000, size:0x10000
GPT part:  4, name:       recovery, start:0x18000, size:0x20000
GPT part:  5, name:          backup, start:0x38000, size:0x38000
GPT part:  6, name:       security, start:0x70000, size:0x2000
GPT part:  7, name:          cache, start:0x72000, size:0x100000
GPT part:  8, name:          system, start:0x172000, size:0x500000
GPT part:  9, name:       metadata, start:0x672000, size:0x8000
GPT part: 10, name:          vendor, start:0x67a000, size:0x100000
GPT part: 11, name:             oem, start:0x77a000, size:0x100000
GPT part: 12, name:             frp, start:0x87a000, size:0x400
GPT part: 13, name:       userdata, start:0x87a400, size:0x31c3bdf
find partition:uboot OK. first_lba:0x2000.
find partition:trust OK. first_lba:0x4000.
LoadTrust Addr:0x4000
No find bl30.bin
Load uboot, ReadLba = 2000
Load OK, addr=0x200000, size=0xeec1c
RunBL31 0x10000
NOTICE:  BL31: v1.3(debug):51f2096
NOTICE:  BL31: Built : 16:24:31, May  6 2019
NOTICE:  BL31: Rockchip release version: v1.1
INFO: GICv3 with legacy support detected. ARM GICV3 driver initialized in EL3
INFO: Using opteed sec cpu_context!
INFO: boot cpu mask: 0
INFO: plat_rockchip_pmu_init(1181): pd status 3e
INFO: BL31: Initializing runtime services
INFO: BL31: Initializing BL32
INF [0x0] TEE-CORE:init_primary_helper:337: Initializing (1.1.0-217-g62d4d856 #81 Mon May 13 11:37:54 UTC 2019 aarch64)

INF [0x0] TEE-CORE:init_primary_helper:338: Release version: 1.2

INF [0x0] TEE-CORE:init_teecore:83: teecore inits done
INFO: BL31: Preparing for EL3 exit to normal world
INFO: Entry point address = 0x200000
INFO: SPSR = 0x3c9

U-Boot 2017.09-gafd25a447a (Nov 29 2019 - 09:59:11 +0800)

Model: Rockchip RK3399 Evaluation Board
PreSerial: 2
DRAM:  3.8 GiB
Sysmem: init
Relocation Offset is: f5bd6000
Using default environment

dwmmc@fe320000: 1, sdhci@fe330000: 0
Card did not respond to voltage select!
mmc_init: -95, time 9
switch to partitions #0, OK
mmc0(part 0) is current device
Bootdev: mmc 0
MMC0: HS400, 150Mhz
PartType: EFI
boot mode: recovery
init_resource_list: failed to get resource part, ret=-1
Read kernel dtb failed, ret=-19
Model: Rockchip RK3399 Evaluation Board
rockchip_set_serialno: could not find efuse device
enter Recovery mode!
CLK: (uboot. arml: enter 816000 KHz, init 816000 KHz, kernel 0N/A)
CLK: (uboot. armb: enter 24000 KHz, init 24000 KHz, kernel 0N/A)
  aplll 816000 KHz
  apllb 24000 KHz
  dpll 800000 KHz
  cpll 24000 KHz
  gpll 800000 KHz
  npll 600000 KHz
  vpll 24000 KHz
  aclk_perihp 133333 KHz
  hclk_perihp 66666 KHz
  pclk_perihp 33333 KHz
  aclk_perilp0 266666 KHz
  hclk_perilp0 88888 KHz
  pclk_perilp0 44444 KHz
  hclk_perilp1 100000 KHz
  pclk_perilp1 50000 KHz
Net: No ethernet found.
Hit key to stop autoboot('CTRL+C'):  0
ANDROID: reboot reason: "recovery"
Not AVB images, AVB skip
** Invalid Android Image header **
Android image load failed
Android boot failed, error -1.
boot mode: recovery
=Booting Rockchip format image=
Could not found misc partition
Card did not respond to voltage select!
mmc_init: -95, time 9
switch to partitions #0, OK
mmc0(part 0) is current device
Failed to mount ext2 filesystem...
** Unrecognized filesystem type **
starting USB...
USB0: Register 2000140 NbrPorts 2
Starting the controller
USB XHCI 1.10
USB1: Register 2000140 NbrPorts 2
Starting the controller
USB XHCI 1.10
scanning bus 0 for devices... 1 USB Device(s) found
scanning bus 1 for devices... 1 USB Device(s) found
   scanning usb for storage devices... 0 Storage Device(s) found

Device 0: unknown device
No ethernet found.
missing environment variable: pxeuuid
missing environment variable: bootfile
Retrieving file: pxelinux.cfg/00000000
No ethernet found.
missing environment variable: bootfile
Retrieving file: pxelinux.cfg/0000000
No ethernet found.
missing environment variable: bootfile
Retrieving file: pxelinux.cfg/000000
No ethernet found.
missing environment variable: bootfile
Retrieving file: pxelinux.cfg/00000
No ethernet found.
missing environment variable: bootfile
Retrieving file: pxelinux.cfg/0000
No ethernet found.
missing environment variable: bootfile
Retrieving file: pxelinux.cfg/000
No ethernet found.
missing environment variable: bootfile
Retrieving file: pxelinux.cfg/00
No ethernet found.
missing environment variable: bootfile
Retrieving file: pxelinux.cfg/0
No ethernet found.
missing environment variable: bootfile
Retrieving file: pxelinux.cfg/default-arm-rockchip
No ethernet found.
missing environment variable: bootfile
Retrieving file: pxelinux.cfg/default-arm
No ethernet found.
missing environment variable: bootfile
Retrieving file: pxelinux.cfg/default
No ethernet found.
Config file not found
No ethernet found.
=>

作者: jefferyzhang 时间: 2019-11-30 19:13
为啥不直接下我们编译好的安卓固件用。。。

作者: wangjian1937 时间: 2019-12-2 09:53

jefferyzhang 发表于 2019-11-30 19:13
为啥不直接下我们编译好的安卓固件用。。。

由于项目需求需要外接麦克风设备，发现固件自带的tinycap当声卡设备号超过3之后就无法使用，所以想把hdmi soc 及之前默认的0、1、2号设备驱动去掉，需要重新编译固件。

作者: wangjian1937 时间: 2019-12-2 09:55

wangjian1937 发表于 2019-12-2 09:53
由于项目需求需要外接麦克风设备，发现固件自带的tinycap当声卡设备号超过3之后就无法使用，所以想把hd ...

另外想每次启动都自动进入android系统。

作者: zhoy888 时间: 2019-12-11 09:19

wangjian1937 发表于 2019-12-2 09:55
另外想每次启动都自动进入android系统。

编译好了吗？

欢迎光临 Toybrick (https://t.rock-chips.com/)