Toybrick

标题: rk3399pro debian10如何配置静态IP [打印本页]

作者: buyishengun 时间: 2020-5-12 08:35
标题: rk3399pro debian10如何配置静态IP
如题，rk3399pro debian10如何配置静态IP？

作者: jefferyzhang 时间: 2020-5-12 09:00
https://www.wanvi.net/14152.html

作者: buyishengun 时间: 2020-5-12 09:11

jefferyzhang 发表于 2020-5-12 09:00
https://www.wanvi.net/14152.html

我参照上面那个帖子进行设置：
/etc/network/interfaces内容如下：

# interfaces(5) file used by ifup(8) and ifdown(8)
# Include files from /etc/network/interfaces.d:
# source-directory /etc/network/interfaces.d
auto eth0 #网卡随系统启动而启动，推荐这种模式
iface eth0 inet static #static为静态模式
      address 192.168.9.130 #ip地址
      netmask 255.255.255.0  #掩码
      gateway 192.168.9.254  #网关

但是ip还是自动获取的：
root@debian10:/home/toybrick# ifconfig
eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500
      inet 192.168.9.121  netmask 255.255.255.0  broadcast 192.168.9.255
      inet6 fe80::36ba:9aff:fe6f:2985  prefixlen 64  scopeid 0x20<link>
      ether 34:ba:9a:6f:29:85  txqueuelen 1000  (Ethernet)
      RX packets 49  bytes 3624 (3.5 KiB)
      RX errors 0  dropped 0  overruns 0  frame 0
      TX packets 45  bytes 6306 (6.1 KiB)
      TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0
      device interrupt 24

eth0:0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500
      inet 192.168.1.100  netmask 255.255.255.0  broadcast 0.0.0.0
      ether 34:ba:9a:6f:29:85  txqueuelen 1000  (Ethernet)
      device interrupt 24

lo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536
      inet 127.0.0.1  netmask 255.0.0.0
      inet6 ::1  prefixlen 128  scopeid 0x10<host>
      loop  txqueuelen 1  (Local Loopback)
      RX packets 68  bytes 4080 (3.9 KiB)
      RX errors 0  dropped 0  overruns 0  frame 0
      TX packets 68  bytes 4080 (3.9 KiB)
      TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

root@debian10:/home/toybrick#

好像是用dhclient自动获取ip，不知道在哪里关掉这个服务

作者: jefferyzhang 时间: 2020-5-12 09:18
UI上有networkmanager，要么用UI界面设置里配，要么把networkmanager干掉

作者: buyishengun 时间: 2020-5-12 09:25

jefferyzhang 发表于 2020-5-12 09:18
UI上有networkmanager，要么用UI界面设置里配，要么把networkmanager干掉

要如何干掉networkmanager？是用systemctl吗？
我关掉NetworkManager
root@debian10:/home/toybrick# systemctl disable NetworkManager
Removed /etc/systemd/system/multi-user.target.wants/NetworkManager.service.
Removed /etc/systemd/system/network-online.target.wants/NetworkManager-wait-online.service.
Removed /etc/systemd/system/dbus-org.freedesktop.nm-dispatcher.service.

重启：
reboot

root@debian10:/home/toybrick# systemctl status NetworkManager
● NetworkManager.service - Network Manager
Loaded: loaded (/lib/systemd/system/NetworkManager.service; disabled; vendor
Active: inactive (dead)
   Docs: man:NetworkManager(8)
lines 1-4/4 (END)

root@debian10:/home/toybrick# ifconfig
eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500
      inet 192.168.9.121  netmask 255.255.255.0  broadcast 192.168.9.255
      inet6 fe80::36ba:9aff:fe6f:2985  prefixlen 64  scopeid 0x20<link>
      ether 34:ba:9a:6f:29:85  txqueuelen 1000  (Ethernet)
      RX packets 264  bytes 19837 (19.3 KiB)
      RX errors 0  dropped 0  overruns 0  frame 0
      TX packets 54  bytes 7214 (7.0 KiB)
      TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0
      device interrupt 24

eth0:0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500
      inet 192.168.1.100  netmask 255.255.255.0  broadcast 0.0.0.0
      ether 34:ba:9a:6f:29:85  txqueuelen 1000  (Ethernet)
      device interrupt 24

lo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536
      inet 127.0.0.1  netmask 255.0.0.0
      inet6 ::1  prefixlen 128  scopeid 0x10<host>
      loop  txqueuelen 1  (Local Loopback)
      RX packets 68  bytes 4080 (3.9 KiB)
      RX errors 0  dropped 0  overruns 0  frame 0
      TX packets 68  bytes 4080 (3.9 KiB)
      TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

root@debian10:/home/toybrick#

地址还是自动获取的，不是我配置的那个。

root@debian10:/home/toybrick# ps -elf | grep dhclient
5 S root 692 1 0 80 0 - 2260 poll_s 01:22 ? 00:00:00 /usr/sbin/dhclient -v -cf /var/lib/wicd/dhclient.conf eth0
0 S root 788 754 0 80 0 - 1177 pipe_w 01:24 ttyFIQ0 00:00:00 grep dhclient
root@debian10:/home/toybrick#
查看dhclient程序依然在运行，是不是哪里还没关好？

作者: buyishengun 时间: 2020-5-12 10:31

jefferyzhang 发表于 2020-5-12 09:18
UI上有networkmanager，要么用UI界面设置里配，要么把networkmanager干掉

我重新烧写镜像，然后：
/etc/network/interfaces内容如下：
# interfaces(5) file used by ifup(8) and ifdown(8)
# Include files from /etc/network/interfaces.d:
source-directory /etc/network/interfaces.d
auto eth0
iface eth0 inet static
address 192.168.9.130
gateway 192.168.9.254
netmask 255.255.255.0

可以设置静态IP了

作者: addy 时间: 2020-5-12 10:32
可以不去掉networkmanager
只需要按如下命令执行就行：
1. 查看connection: nmcli conn show
2. 删除所有 connections：
nmcli conn del xxxx (xxx：第一步列出的Name那一列）
3. nmcli conn add con-name YOUR-NAME type ethernet ifname eth0 autoconnect yes ip4 192.168.9.130/24
nmcli conn mod YOUR-NAME ipv4.gateway 192.168.9.254

作者: buyishengun 时间: 2020-5-12 10:35

addy 发表于 2020-5-12 10:32
可以不去掉networkmanager
只需要按如下命令执行就行：
1. 查看connection: nmcli conn show

已经可以了，重新烧写镜像就可以了，可能是之前哪里配了不该配的东西

作者: Ptolemaeus 时间: 2021-3-11 15:00
重新烧写动作太大了

欢迎光临 Toybrick (https://t.rock-chips.com/)