RV1126烧写内核以后无法正常启动 - Toybrick

=> DDR Version V1.05 20201214
DDR4, 328MHz
BW=32 Col=10 Bk=4 BG=2 CS0 Row=16 CS=1 Die BW=16 Size=2048MB
change to: 328MHz
change to: 528MHz
change to: 784MHz
change to: 1056MHz(final freq)
out
U-Boot SPL board init
U-Boot SPL 2017.09-gbf8034353d-201209 #ldq (Dec 10 2020 - 15:35:41)
unknown raw ID phN
unrecognized JEDEC id bytes: 00, 00, 00
Trying to boot from MMC2
Card did not respond to voltage select!
mmc_init: -95, time 9
spl: mmc init failed with error: -95
Trying to boot from MMC1
Magic is incorrect.
Error validating A/B metadata from disk. Resetting and writing new A/B metadata to disk.
## Verified-boot: 0
## Checking optee 0x08400000 ... sha256+ OK
## Checking uboot 0x00400000 ... sha256+ OK
## Checking fdt 0x004b5e7c ... sha256+ OK
Jumping to U-Boot(0x00400000) via OP-TEE(0x08400000)
Total: 146.96 ms
I/TC:
I/TC: cpu feature:0x0
I/TC: cpu_st=0xe0
I/TC: OP-TEE version: 3.6.0-315-g715df903 #2 Wed Apr 28 01:43:37 UTC 2021 arm
I/TC: Next entry point address: 0x00400000
I/TC: Initialized
U-Boot 2017.09-g09fb47fbbb-210616 #chenyf (Jun 17 2021 - 08:26:18 +0800)
Model: Rockchip RV1126 Evaluation Board
PreSerial: 2, raw, 0xff570000
DRAM: 2 GiB
Sysmem: init
Relocation Offset: 00000000, fdt: 7bbf9c58
Using default environment
dwmmc@ffc50000: 0, dwmmc@ffc60000: 1
Bootdev(atags): mmc 0
MMC0: HS200, 200Mhz
PartType: EFI
boot mode: None
FIT: No boot partition
Get board-id node failed
Failed to mount ext2 filesystem...
** Unrecognized filesystem type **
No resource partition
Failed to load DTB
Failed to get kernel dtb, ret=-19
io-domain: OK
Model: Rockchip RV1126 Evaluation Board
Load SnMacAc from vendor: sn TRs11264210600136, mac 10dcb6905481
optee api revision: 2.0
TEEC: Waring: Could not find security partition
Load SnMacAc from rpmb: sn TRs11264210600136, mac 10dcb6905481
Toybrick check SnMacAc OK, sn TRs11264210600136
CLK: (sync kernel. arm: enter 1008000 KHz, init 816000 KHz, kernel 0N/A)
apll 816000 KHz
dpll 528000 KHz
gpll 1188000 KHz
cpll 500000 KHz
hpll 1400000 KHz
aclk_pdbus 500000 KHz
hclk_pdbus 198000 KHz
pclk_pdbus 99000 KHz
aclk_pdphp 297000 KHz
hclk_pdphp 198000 KHz
hclk_pdaudio 148500 KHz
hclk_pdcore 198000 KHz
pclk_pdpmu 99000 KHz
Net: eth0: ethernet@ffc40000
Hit key to stop autoboot('CTRL+C'): 0
## Booting FIT Image FIT: No boot partition
FIT: No FIT image
ANDROID: reboot reason: "(none)"
android_image_load_by_partname: Can't find part: boot
Android image load failed
Android boot failed, error -1.
MMC error: The cmd index is 1, ret is -110
Card did not respond to voltage select!
mmc_init: -95, time 9
switch to partitions #0, OK
mmc0(part 0) is current device
Failed to mount ext2 filesystem...
** Unrecognized filesystem type **
MMC error: The cmd index is 1, ret is -110
Card did not respond to voltage select!
mmc_init: -95, time 9
** Bad device mmc 1 **
MMC error: The cmd index is 1, ret is -110
Card did not respond to voltage select!
mmc_init: -95, time 10
** Bad device mmc 1 **
Failed to mount ext2 filesystem...
** Unrecognized filesystem type **
starting USB...
Bus dwc3@ffd00000: Register 1000140 NbrPorts 1
Starting the controller
USB XHCI 1.10
scanning bus dwc3@ffd00000 for devices... 1 USB Device(s) found
scanning usb for storage devices... 0 Storage Device(s) found
Device 0: unknown device
EQOS_DMA_MODE_SWR stuckFAILED: 0rv1126_set_rgmii_speed can't get clk_mac_speed clock (ret=-61):
missing environment variable: pxeuuid
missing environment variable: bootfile
Retrieving file: pxelinux.cfg/01-10-dc-b6-90-54-81
EQOS_DMA_MODE_SWR stuckFAILED: 0rv1126_set_rgmii_speed can't get clk_mac_speed clock (ret=-61):
missing environment variable: bootfile
Retrieving file: pxelinux.cfg/00000000
EQOS_DMA_MODE_SWR stuckFAILED: 0rv1126_set_rgmii_speed can't get clk_mac_speed clock (ret=-61):
missing environment variable: bootfile
Retrieving file: pxelinux.cfg/0000000
EQOS_DMA_MODE_SWR stuckFAILED: 0rv1126_set_rgmii_speed can't get clk_mac_speed clock (ret=-61):
missing environment variable: bootfile
Retrieving file: pxelinux.cfg/000000
EQOS_DMA_MODE_SWR stuckFAILED: 0rv1126_set_rgmii_speed can't get clk_mac_speed clock (ret=-61):
missing environment variable: bootfile
Retrieving file: pxelinux.cfg/00000
EQOS_DMA_MODE_SWR stuckFAILED: 0rv1126_set_rgmii_speed can't get clk_mac_speed clock (ret=-61):
missing environment variable: bootfile
Retrieving file: pxelinux.cfg/0000
EQOS_DMA_MODE_SWR stuckFAILED: 0rv1126_set_rgmii_speed can't get clk_mac_speed clock (ret=-61):
missing environment variable: bootfile
Retrieving file: pxelinux.cfg/000
EQOS_DMA_MODE_SWR stuckFAILED: 0rv1126_set_rgmii_speed can't get clk_mac_speed clock (ret=-61):
missing environment variable: bootfile
Retrieving file: pxelinux.cfg/00
EQOS_DMA_MODE_SWR stuckFAILED: 0rv1126_set_rgmii_speed can't get clk_mac_speed clock (ret=-61):
missing environment variable: bootfile
Retrieving file: pxelinux.cfg/0
EQOS_DMA_MODE_SWR stuckFAILED: 0rv1126_set_rgmii_speed can't get clk_mac_speed clock (ret=-61):
missing environment variable: bootfile
Retrieving file: pxelinux.cfg/default-arm-rockchip
EQOS_DMA_MODE_SWR stuckFAILED: 0rv1126_set_rgmii_speed can't get clk_mac_speed clock (ret=-61):
missing environment variable: bootfile
Retrieving file: pxelinux.cfg/default-arm
EQOS_DMA_MODE_SWR stuckFAILED: 0rv1126_set_rgmii_speed can't get clk_mac_speed clock (ret=-61):
missing environment variable: bootfile
Retrieving file: pxelinux.cfg/default
EQOS_DMA_MODE_SWR stuckFAILED: 0rv1126_set_rgmii_speed can't get clk_mac_speed clock (ret=-61):
Config file not found
EQOS_DMA_MODE_SWR stuckFAILED: 0rv1126_set_rgmii_speed can't get clk_mac_speed clock (ret=-61):