Toybrick

标题: TB-RK3588X debian系统,长按power键关机后自动重启 [打印本页]

作者: kevinyang    时间: 2023-9-19 16:02
标题: TB-RK3588X debian系统,长按power键关机后自动重启
使用TB-RK3588X0-Release_V1.0.1_20230203固件包或者sdk制作的images,在开发板上都出现长按关机后系统自动重启的情况,请帮忙分析下原因。
以下是部分日志

[  OK  ] Stopped Network Time Synchronization.
[  OK  ] Stopped Load/Save Screen B…htness of backlight:backlight.
[  OK  ] Removed slice system-systemd\x2dbacklight.slice.
[  OK  ] Stopped Update UTMP about System Boot/Shutdown.
[  OK  ] Stopped Create Volatile Files and Directories.
[  OK  ] Stopped target Local File Systems.
[  OK  ] Stopped target Local File Systems (Pre).
[  OK  ] Stopped Create Static Device Nodes in /dev.
[  OK  ] Stopped Create System Users.
[  OK  ] Stopped Remount Root and Kernel File Systems.
[  OK  ] Reached target Shutdown.
[  OK  ] Reached target Final Step.
[  OK  ] Finished Power-Off.
[  OK  ] Reached target Power-Off.
[  338.020724] systemd-shutdown[1]: Syncing filesystems and block devices.
[  338.037838] systemd-shutdown[1]: Sending SIGTERM to remaining processes...
[  338.053411] systemd-journald[281]: Received SIGTERM from PID 1 (systemd-shutdow).
[  338.076645] systemd-shutdown[1]: Sending SIGKILL to remaining processes...
[  338.094310] systemd-shutdown[1]: Unmounting file systems.
[  338.096609] [20222]: Remounting '/' read-only in with options '(null)'.
[  338.118306] EXT4-fs (mmcblk0p6): re-mounted. Opts: (null)
[  338.138866] systemd-shutdown[1]: All filesystems unmounted.
[  338.138910] systemd-shutdown[1]: Deactivating swaps.
[  338.139037] systemd-shutdown[1]: All swaps deactivated.
[  338.139049] systemd-shutdown[1]: Detaching loop devices.
[  338.141422] systemd-shutdown[1]: All loop devices detached.
[  338.141449] systemd-shutdown[1]: Stopping MD devices.
[  338.141632] systemd-shutdown[1]: All MD devices stopped.
[  338.141645] systemd-shutdown[1]: Detaching DM devices.
[  338.141804] systemd-shutdown[1]: All DM devices detached.
[  338.141816] systemd-shutdown[1]: All filesystems, swaps, loop devices, MD devices and DM devices detached.
[  338.160178] systemd-shutdown[1]: Syncing filesystems and block devices.
[  338.161406] systemd-shutdown[1]: Powering off.
[  338.339761] rk860-regulator 2-0042: rk860..... reset
[  338.340612] rk860-regulator 2-0042: force rk860x_reset ok!
[  338.341109] rk860-regulator 0-0043: rk860..... reset
[  338.342508] rk860-regulator 0-0043: force rk860x_reset ok!
[  338.343004] rk860-regulator 0-0042: rk860..... reset
[  338.344407] rk860-regulator 0-0042: force rk860x_reset ok!
[  338.390014] mpp_av1dec av1d-master: shutdown device
[  338.390442] mpp_av1dec av1d-master: shutdown success
[  338.390945] [WLAN_RFKILL]: Enter rfkill_wlan_shutdown
[  338.391393] [WLAN_RFKILL]: rockchip_wifi_power: 0
[  338.391808] [WLAN_RFKILL]: rockchip_wifi_power: toggle = false
[  338.392320] wifi power off
[  338.499248] [WLAN_RFKILL]: wifi shut off power [GPIO105-0]
[  338.499729] [WLAN_RFKILL]: rfkill_set_wifi_bt_power: 0
[  338.500469] rockchip-i2s-tdm fddf8000.i2s: failed to clear 1
[  338.501076] rockchip-i2s-tdm fddf8000.i2s: failed to clear on slave mode 1
[  338.501933] rockchip-i2s-tdm fddf8000.i2s: failed to clear 2
[  338.502499] xhci-hcd xhci-hcd.6.auto: remove, state 4
[  338.502951] usb usb6: USB disconnect, device number 1
[  338.503724] xhci-hcd xhci-hcd.6.auto: USB bus 6 deregistered
[  338.504398] xhci-hcd xhci-hcd.6.auto: remove, state 4
[  338.504847] usb usb5: USB disconnect, device number 1
[  338.505829] xhci-hcd xhci-hcd.6.auto: USB bus 5 deregistered
[  338.507264] rkisp_hw fdcc0000.rkisp: rkisp_hw_shutdown
[  338.507732] rkisp_hw fdcb0000.rkisp: rkisp_hw_shutdown
[  338.508212] mpp_rkvdec2 fdc48100.rkvdec-core: shutdown device
[  338.508715] mpp_rkvdec2 fdc48100.rkvdec-core: shutdown success
[  338.509261] mpp_rkvdec2 fdc38100.rkvdec-core: shutdown device
[  338.509764] mpp_rkvdec2 fdc38100.rkvdec-core: shutdown success
[  338.510298] mpp_rkvenc2 fdbe0000.rkvenc-core: shutdown device
[  338.510800] mpp_rkvenc2 fdbe0000.rkvenc-core: shutdown success
[  338.511338] mpp_rkvenc2 fdbd0000.rkvenc-core: shutdown device
[  338.511841] mpp_rkvenc2 fdbd0000.rkvenc-core: shutdown success
[  338.512377] mpp-iep2 fdbb0000.iep: shutdown device
[  338.512811] mpp-iep2 fdbb0000.iep: shutdown success
[  338.513257] mpp_vepu2 fdbac000.jpege-core: shutdown device
[  338.513738] mpp_vepu2 fdbac000.jpege-core: shutdown success
[  338.514245] mpp_vepu2 fdba8000.jpege-core: shutdown device
[  338.514726] mpp_vepu2 fdba8000.jpege-core: shutdown success
[  338.515233] mpp_vepu2 fdba4000.jpege-core: shutdown device
[  338.515714] mpp_vepu2 fdba4000.jpege-core: shutdown success
[  338.516228] mpp_vepu2 fdba0000.jpege-core: shutdown device
[  338.516709] mpp_vepu2 fdba0000.jpege-core: shutdown success
[  338.517217] mpp_jpgdec fdb90000.jpegd: shutdown device
[  338.517665] mpp_jpgdec fdb90000.jpegd: shutdown success
[  338.518172] mpp_vepu2 fdb50000.vepu: shutdown device
[  338.518609] mpp_vepu2 fdb50000.vepu: shutdown success
[  338.519058] mpp_vdpu2 fdb50400.vdpu: shutdown device
[  338.519501] mpp_vdpu2 fdb50400.vdpu: shutdown success
[  338.520084] dwc3 fc000000.usb: Wakeup sysfs attributes not added
[  338.527444] reboot: Power down
DDR V1.09 a930779e06 typ 22/11/21-17:50:56
LPDDR4X, 2112MHz
channel[0] BW=16 Col=10 Bk=8 CS0 Row=16 CS1 Row=16 CS=2 Die BW=16 Size=2048MB
channel[1] BW=16 Col=10 Bk=8 CS0 Row=16 CS1 Row=16 CS=2 Die BW=16 Size=2048MB
channel[2] BW=16 Col=10 Bk=8 CS0 Row=16 CS1 Row=16 CS=2 Die BW=16 Size=2048MB
channel[3] BW=16 Col=10 Bk=8 CS0 Row=16 CS1 Row=16 CS=2 Die BW=16 Size=2048MB
Manufacturer ID:0x1
CH0 RX Vref:30.7%, TX Vref:21.8%,20.8%
CH1 RX Vref:29.7%, TX Vref:21.8%,20.8%
CH2 RX Vref:32.7%, TX Vref:19.8%,20.8%
CH3 RX Vref:30.7%, TX Vref:19.8%,21.8%


作者: 395876134    时间: 2023-9-19 16:12
toybrick 板子默认不支持关机功能,需要改硬件才能支持
作者: kevinyang    时间: 2023-9-19 16:15
请问是改哪里?是跳线或者更改电阻呢?方便提供一下sch的差异部分吗?
作者: kevinyang    时间: 2023-9-19 17:34
请问改动的地方多吗?麻烦帮忙提供需要修改的地方,我这边修改一下看看,谢谢。
作者: wb4916    时间: 2024-5-31 09:40
本帖最后由 wb4916 于 2024-5-31 09:46 编辑
kevinyang 发表于 2023-9-19 17:34
请问改动的地方多吗?麻烦帮忙提供需要修改的地方,我这边修改一下看看,谢谢。 ...

【逮着你购买的淘宝商家的客服使劲问吧!】
修改的地方:感觉原理图部分的差异不是一般的大。
反正做驱动的我是没有看懂,淘宝客服让找自己公司的硬件去看看!

【看图这里是需要割线!】

[attach]2840[/attach]




[attach]2841[/attach]





[attach]2842[/attach]


【对于这种设计缺陷,如果Toybrick的服务周到的话,对于购买开发板的用户,全部免费赠送所需要的修改转接板就是了!或者快递回去,免费返工!】









欢迎光临 Toybrick (https://t.rock-chips.com/) Powered by Discuz! X3.3