Toybrick

标题: RX3588刷写编译出来的官方固件无法启动 [打印本页]

作者: buptwei 时间: 2023-11-1 14:24
标题: RX3588刷写编译出来的官方固件无法启动
本帖最后由 buptwei 于 2023-11-1 14:35 编辑

使用RX3588X开发板，源码路径GitHub - rockchip-toybrick/edge编译uboot，kernel，使用原有的rootfs.img刷写进去后，系统启动失败，编译过程入下：./edge set
./edge build -u
./edge build -k
./edge build -p
使用loader模式刷写out/rk3588/TB-RK3588X0/images下的镜像
启动后报错如下：
[ 5.434036] pwr    0x014c: 0000e83b 00002411 00000000 00000000
[ 5.434578] status 0x0180: 2411e83b 00000000 00000000 00000000
[ 5.435120] req    0x010c: 00001c0f 0000000a 00000000 000a1c0f
[ 5.435661] idle    0x0120: 000a1c0f 00000000 0000ffff 0000ffff
[ 5.436202] ack    0x0118: 000a1c0f 00000000 000a1c0f 00000000
[ 5.436744] mem_pwr 0x01a0: 00000000 00000000 00000000 00000000
[ 5.437284] chain_st  0x01f0: ee17c4ff 000003db 11e83b00 00000024
[ 5.437825] mem_st 0x01f8: 11e83b00 00000024 00000203 0000ffff
[ 5.438366] repair_st 0x0290: faf70be1 000381ff 00000000 00000000
[ 5.438912] rockchip-thermal fec00000.tsadc: channal 0: temperature(32 C)
[ 5.439513] THERMAL REGS:
[ 5.439763] 00000000: 00000100 00000001 0000000c 0000007f 00000000 00000001 00000000 0000007f
[ 5.440516] 00000020: 00000000 0000007e 00000000 00000124 00000124 00000125 00000124 00000125
[ 5.441268] 00000040: 00000124 00000124 00000000 00000000 00000000 00000000 00000000 00000000
[ 5.442021] 00000060: 00000000 00000000 00000000 00000153 00000000 00000000 00000000 00000000
[ 5.442767] 00000080: 00000000 00000000
[ 5.443110] Kernel Offset: disabled
[ 5.443421] CPU features: 0x000,48000026,6a00aa18
[ 5.443842] Memory Limit: none
[ 5.444129] cpu cpu6: cur_freq: 408000000 Hz, volt_vdd: 675000 uV, volt_mem: 675000 uV
[ 5.444832] cpu cpu4: cur_freq: 408000000 Hz, volt_vdd: 675000 uV, volt_mem: 675000 uV
[ 5.445534] cpu cpu0: cur_freq: 816000000 Hz, volt_vdd: 675000 uV, volt_mem: 675000 uV
[ 5.446238] rockchip-dmc dmc: cur_freq: 2112000000 Hz, volt_vdd: 850000 uV, volt_mem: 750000 uV
[ 5.476983] ---[ end Kernel panic - not syncing: No working init found.  Try passing init= option to kernel. See Linux Documentation/admin-guide/init.rst for guidance. ]---

像是根文件系统未挂载成功，查看boot分区的extlinux配置文件的UUID没错

作者: Deeping 时间: 2023-11-1 15:16
发下完整的log启动信息

作者: buptwei 时间: 2023-11-1 15:59
回退SDK版本后启动正常，回退到34f18201bf86f9bf410b46cc29e2ae70c8cc99af版本即可，希望官方能尽快修复bug

作者: ygc 时间: 2024-8-1 16:14

buptwei 发表于 2023-11-1 15:59
回退SDK版本后启动正常，回退到34f18201bf86f9bf410b46cc29e2ae70c8cc99af版本即可，希望官方能尽快修复bug ...

请问怎么回退SDK版本？

欢迎光临 Toybrick (https://t.rock-chips.com/)