Toybrick

标题: rk3568使用distro启动的时候无法正确加载Image [打印本页]

作者: yueliang12345 时间: 昨天 22:34
标题: rk3568使用distro启动的时候无法正确加载Image
[debug] Entered ext4fs_find_file with path: /extlinux/extlinux.conf
[debug] Calling ext4fs_find_file1 with path: /extlinux/extlinux.conf
[debug] Processing path: /extlinux/extlinux.conf
[debug] Found node, checking type. Expected type: 1, Found type: 1
[debug] Successfully found and verified file or directory.
Found /extlinux/extlinux.conf
[Debug]Retrieving file: /extlinux/extlinux.conf
[Debug]do_get_any function
[Debug]do_get_any inner function
[Debug]do_get_any inner function c00000
[Debug]do_get_any inner function /extlinux/extlinux.conf
[Debug]fs_readAttempting to find file: /extlinux/extlinux.conf
[debug] Entered ext4fs_find_file with path: /extlinux/extlinux.conf
[debug] Calling ext4fs_find_file1 with path: /extlinux/extlinux.conf
[debug] Processing path: /extlinux/extlinux.conf
[debug] Found node, checking type. Expected type: 1, Found type: 1
[debug] Successfully found and verified file or directory.
199 bytes read in 5 ms (38.1 KiB/s)
1:    rockchip-kernel-5.10
[Debug]Retrieving file: /Image
[Debug]do_get_any function
[Debug]do_get_any inner function
[Debug]do_get_any inner function 280000
[Debug]do_get_any inner function /Image
[Debug]fs_readAttempting to find file: /Image
[debug] Entered ext4fs_find_file with path: /Image
[debug] Calling ext4fs_find_file1 with path: /Image
[debug] Processing path: /Image
[debug] Failed to find directory entry for: Image
[debug] ext4fs_find_file1 failed to find file or directory, error code: 0
, error code: 0file: /Image
**Debug] Attempting to find file: /Image
实际上是是可以打印的
=> ext4ls mmc 0:3 /
[debug] Entered ext4fs_find_file with path: /
[debug] Calling ext4fs_find_file1 with path: /
[debug] Processing path: /
[debug] Found node, checking type. Expected type: 2, Found type: 2
[debug] Successfully found and verified file or directory.
<DIR>    2048 .
<DIR>    2048 ..
<DIR>    2048 extlinux
      35717632 Image
      188005 rk3568-atk-evb1-ddr4-v10-linux.dtb

作者: yueliang12345 时间: 昨天 22:35
上述debug是我加的打印，为什么配置文件可以被正常识别并加载但是内核并不能识别

作者: jax.fang 时间: 12 小时前
本帖最后由 jax.fang 于 2025-3-13 09:08 编辑

1. 确认下cat /extlinux/extlinux.conf 看下路径Image 放的路径对不对 , log上是找/Image这个路径 2. kernel 配置确认CONFIG_EXT4_USE_FOR_EXT2是否有打开

欢迎光临 Toybrick (https://t.rock-chips.com/)