Toybrick

TB-RK3399ProD无法正常使用imx415

wahyyou

注册会员

积分
98
楼主
发表于 2023-3-2 10:33:51    查看: 4186|回复: 0 | [复制链接]    打印 | 只看该作者
本帖最后由 wahyyou 于 2023-3-2 11:48 编辑

烧写官方提供的boot_linux_imx415_prod.img后,摄像头没法正常工作。
摄像头的画面是这样的:




百度云盘连接里是一个摄像头画面的录像文件
链接:https://pan.baidu.com/s/1IK_yW3R0uvi0lHiknRZQfg
提取码:vbzv
--来自百度网盘超级会员V6的分享



  1. toybrick@debian10:~$ dmesg | grep imx

  2. [    2.910806] imx415 1-001a: driver version: 00.01.08

  3. [    2.912496] imx415 1-001a:  Get hdr mode failed! no hdr default

  4. [    2.914270] imx415 1-001a: GPIO lookup for consumer reset

  5. [    2.914277] imx415 1-001a: using device tree for GPIO lookup

  6. [    2.914301] of_get_named_gpiod_flags: parsed 'reset-gpios' property of node '/i2c@ff110000/imx415@1a[0]' - status (0)

  7. [    2.914324] imx415 1-001a: GPIO lookup for consumer power

  8. [    2.914331] imx415 1-001a: using device tree for GPIO lookup

  9. [    2.914349] of_get_named_gpiod_flags: parsed 'power-gpios' property of node '/i2c@ff110000/imx415@1a[0]' - status (0)

  10. [    2.914410] imx415 1-001a: could not get sleep pinstate

  11. [    2.916093] imx415 1-001a: Looking up dvdd-supply from device tree

  12. [    2.916101] imx415 1-001a: Looking up dvdd-supply property in node /i2c@ff110000/imx415@1a failed

  13. [    2.917946] imx415 1-001a: Looking up dovdd-supply from device tree

  14. [    2.917955] imx415 1-001a: Looking up dovdd-supply property in node /i2c@ff110000/imx415@1a failed

  15. [    2.919751] imx415 1-001a: Looking up avdd-supply from device tree

  16. [    2.919760] imx415 1-001a: Looking up avdd-supply property in node /i2c@ff110000/imx415@1a failed

  17. [    2.992390] imx415 1-001a: Detected imx415 id 0000e0

  18. [    3.011313] imx415 2-001a: driver version: 00.01.08

  19. [    3.019709] imx415 2-001a:  Get hdr mode failed! no hdr default

  20. [    3.025679] imx415 2-001a: GPIO lookup for consumer reset

  21. [    3.025696] imx415 2-001a: using device tree for GPIO lookup

  22. [    3.025762] of_get_named_gpiod_flags: parsed 'reset-gpios' property of node '/i2c@ff120000/imx415_1@1a[0]' - status (0)

  23. [    3.025811] imx415 2-001a: GPIO lookup for consumer power

  24. [    3.025827] imx415 2-001a: using device tree for GPIO lookup

  25. [    3.025878] of_get_named_gpiod_flags: parsed 'power-gpios' property of node '/i2c@ff120000/imx415_1@1a[0]' - status (0)

  26. [    3.026059] imx415 2-001a: could not get sleep pinstate

  27. [    3.031852] imx415 2-001a: Looking up dvdd-supply from device tree

  28. [    3.031874] imx415 2-001a: Looking up dvdd-supply property in node /i2c@ff120000/imx415_1@1a failed

  29. [    3.037897] imx415 2-001a: Looking up dovdd-supply from device tree

  30. [    3.037918] imx415 2-001a: Looking up dovdd-supply property in node /i2c@ff120000/imx415_1@1a failed

  31. [    3.043823] imx415 2-001a: Looking up avdd-supply from device tree

  32. [    3.043846] imx415 2-001a: Looking up avdd-supply property in node /i2c@ff120000/imx415_1@1a failed

  33. [    3.061722] imx415 2-001a: Error applying setting, reverse things back

  34. [    3.065796] imx415 2-001a: could not set pins

  35. [    3.140463] imx415 2-001a: Unexpected sensor id(000000), ret(-5)

  36. [  214.621824] imx415 1-001a: s_stream: 1. 3864x2192, hdr: 0, bpp: 10

  37. [  214.638889] imx415 1-001a: set vblank 0x3a vts 2250

  38. [  214.639307] imx415 1-001a: set exposure(shr0) 8 = cur_vts(2250) - val(2242)

  39. [  214.639585] imx415 1-001a: set analog gain 0x0

  40. [  214.754480] imx415 1-001a: s_stream: 0. 3864x2192, hdr: 0, bpp: 10

  41. [  216.211737] imx415 1-001a: s_stream: 1. 3864x2192, hdr: 0, bpp: 10

  42. [  216.231881] imx415 1-001a: set vblank 0x3a vts 2250

  43. [  216.232312] imx415 1-001a: set exposure(shr0) 8 = cur_vts(2250) - val(2242)

  44. [  216.232591] imx415 1-001a: set analog gain 0x0

  45. [  216.512692] imx415 1-001a: set analog gain 0xf0

  46. [  216.513353] imx415 1-001a: set exposure(shr0) 2246 = cur_vts(2250) - val(4)

  47. [  216.545927] imx415 1-001a: set analog gain 0x1

  48. [  216.578705] imx415 1-001a: set analog gain 0x0

  49. [  216.579280] imx415 1-001a: set exposure(shr0) 2123 = cur_vts(2250) - val(127)

  50. [  216.677535] imx415 1-001a: set vblank 0x776f vts 32767

  51. [  216.710781] imx415 1-001a: set vblank 0x3a vts 2250

  52. [  217.193976] imx415 1-001a: set vblank 0x776f vts 32767

  53. [  217.194498] imx415 1-001a: set analog gain 0xf0

  54. [  217.224927] imx415 1-001a: set vblank 0x3a vts 2250

  55. [  217.225237] imx415 1-001a: set analog gain 0x1

  56. [  217.706186] imx415 1-001a: set analog gain 0x0

  57. [  217.771798] imx415 1-001a: set analog gain 0xf0

  58. [  217.804433] imx415 1-001a: set analog gain 0x0

  59. [  217.870397] imx415 1-001a: set analog gain 0xf0

  60. [  217.903087] imx415 1-001a: set analog gain 0x0

  61. [  218.398421] imx415 1-001a: set analog gain 0xf0

  62. [  218.431399] imx415 1-001a: set analog gain 0x0

  63. [  219.091074] imx415 1-001a: set vblank 0x776f vts 32767

  64. [  219.091605] imx415 1-001a: set analog gain 0xf0

  65. [  219.124206] imx415 1-001a: set vblank 0x3a vts 2250

  66. [  219.124724] imx415 1-001a: set analog gain 0x0

  67. [  219.607026] imx415 1-001a: set vblank 0x776f vts 32767

  68. [  219.608504] imx415 1-001a: set exposure(shr0) 32763 = cur_vts(32767) - val(4)

  69. [  219.637682] imx415 1-001a: set vblank 0x3a vts 2250

  70. [  219.638192] imx415 1-001a: set exposure(shr0) 2123 = cur_vts(2250) - val(127)

  71. [  221.008911] imx415 1-001a: set vblank 0x776f vts 32767

  72. [  221.009183] imx415 1-001a: set analog gain 0xf0

  73. [  221.009566] imx415 1-001a: set exposure(shr0) 32763 = cur_vts(32767) - val(4)

  74. [  225.849419] imx415 1-001a: set analog gain 0x0

  75. [  225.850829] imx415 1-001a: set exposure(shr0) 8 = cur_vts(32767) - val(32759)

  76. [  226.329749] imx415 1-001a: set analog gain 0xf0

  77. [  229.695327] imx415 1-001a: set exposure(shr0) 30525 = cur_vts(32767) - val(2242)

  78. [  229.696641] imx415 1-001a: set vblank 0x3a vts 2250

  79. [  229.697091] imx415 1-001a: set analog gain 0x0

  80. [  230.175641] imx415 1-001a: set vblank 0x776f vts 32767

  81. [  230.176599] imx415 1-001a: set analog gain 0xf0

  82. [  234.532345] imx415 1-001a: set vblank 0x3a vts 2250

  83. [  234.532817] imx415 1-001a: set analog gain 0x0

  84. [  234.533225] imx415 1-001a: set exposure(shr0) 2246 = cur_vts(2250) - val(4)

  85. [  235.078111] imx415 1-001a: set vblank 0x776f vts 32767

  86. [  235.078536] imx415 1-001a: set analog gain 0xf0

  87. [  243.281606] imx415 1-001a: set vblank 0x3a vts 2250

  88. [  243.281963] imx415 1-001a: set analog gain 0x0

  89. toybrick@debian10:~$
复制代码

请问一下,可能是什么原因?



本帖子中包含更多资源

您需要 登录 才可以下载或查看,没有帐号?立即注册

x
回复

使用道具 举报

您需要登录后才可以回帖 登录 | 立即注册

本版积分规则

产品中心 购买渠道 开源社区 Wiki教程 资料下载 关于Toybrick


快速回复 返回顶部 返回列表