TB-RK1808M0 刷机最近软件V2.0后无法开机

[复制链接] · 发表于 2020-10-31 09:15:18

DDR Version V1.04 20191121
DDR4
933MHz
BW=32 Col=10 Bk=4 BG=2 CS0 Row=15 CS=1 Die BW=16 Size=1024MB
out
Boot1 Release Time: Jul 19 2019 18:22:57, version: 1.04
ChipType = 0x14, 164
sfc_ver 3
sfc nor id: ff ff ff
sfc_nand_init
sfc_ver 3
sfc_nand id: ff ff ff
NeedKHz=200KHz,clock=12000KHz
NeedKHz=200KHz,clock=12000KHz
NeedKHz=200KHz,clock=12000KHz
NeedKHz=18000KHz,clock=192000KHz
NeedKHz=48000KHz,clock=192000KHz
mmc2:cmd19,100
SdmmcInit=2 0
BootCapSize=2000
UserCapSize=7456MB
FwPartOffset=2000 , 2000
SdmmcInit=0 NOT PRESENT
StorageInit ok = 10698
SecureMode = 0
Secure read PBA: 0x4
Secure read PBA: 0x404
Secure read PBA: 0x804
Secure read PBA: 0xc04
Secure read PBA: 0x1004
SecureInit ret = 0, SecureMode = 0
atags_set_bootdev: ret

0)
GPT part:  0, name:          uboot, start:0x2000, size:0x2000
GPT part:  1, name:          trust, start:0x4000, size:0x2000
GPT part:  2, name:    boot_linux, start:0x6000, size:0x20000
GPT part:  3, name:          rootfs, start:0x26000, size:0xe69fdf
find part:uboot OK. first_lba:0x2000.
find part:trust OK. first_lba:0x4000.
LoadTrust Addr:0x4000
No find bl30.bin
Load uboot, ReadLba = 2000
Load OK, addr=0x600000, size=0xc9d34
RunBL31 0x10000
INFO: Preloader serial: 2
NOTICE:  BL31: v1.3(debug):17814c8b1
NOTICE:  BL31: Built : 18:02:20, Nov 25 2019
NOTICE:  BL31: Rockchip release version: v1.0
INFO: GICv3 with legacy support detected. ARM GICV3 driver initialized in EL3
INFO: not boot from ram
INFO: Using opteed sec cpu_context!
INFO: boot cpu mask: 0
INFO: plat_rockchip_pmu_init(1802): pd status 8002
INFO: BL31: Initializing runtime services
INFO: BL31: Initializing BL32
I/TC:
I/TC: Start rockchip platform init
I/TC: Rockchip release version: 1.1
I/TC: OP-TEE version: 3.3.0-188-g62404fcc #46 Mon Nov 18 07:16:57 UTC 2019 aarch64
I/TC: Initialized
INFO: BL31: Preparing for EL3 exit to normal world
INFO: Entry point address = 0x600000
INFO: SPSR = 0x3c9

U-Boot 2017.09-00956-gff7673901c (Sep 08 2020 - 10:33:29 +0800)

Model: Rockchip RK1808 EVB
PreSerial: 2
DRAM:  1018 MiB
Sysmem: init
Relocation Offset is: 3d7f8000
Using default environment

dwmmc@ffcf0000: 1, dwmmc@ffd00000: 0
Bootdev(atags): mmc 0
MMC0: High Speed, 52Mhz
PartType: EFI
rockchip_get_boot_mode: Could not found misc partition
boot mode: None
init_resource_list: failed to get boot part, ret=-1
init_resource_list: failed to get resource part, ret=-1
Distro DTB: /extlinux/toybrick.dtb
** File not found /extlinux/toybrick.dtb **
Read kernel dtb failed, ret=-5
Model: Rockchip RK1808 EVB
Toybrick: SN(TM018083200400244) check OK!
CLK: (sync kernel. arm: enter 1200000 KHz, init 1200000 KHz, kernel 0N/A)
  apll 1200000 KHz
  dpll 462000 KHz
  cpll 24000 KHz
  gpll 384000 KHz
  npll 24000 KHz
  ppll 24000 KHz
  hsclk_bus 96000 KHz
  msclk_bus 32000 KHz
  lsclk_bus 64000 KHz
  msclk_peri 64000 KHz
  lsclk_peri 48000 KHz
Net: No ethernet found.
Hit key to stop autoboot('CTRL+C'):  0
Could not find misc partition
ANDROID: reboot reason: "(none)"
load_android_image: Can't find part: boot
Android image load failed
Android boot failed, error -1.
do_boot_rockchip: Could not find misc partition
do_boot_rockchip: Could not find rootfs part
Card did not respond to voltage select!
mmc_init: -95, time 9
switch to partitions #0, OK
mmc0(part 0) is current device
Scanning mmc 0:3...
## Error: "rknand_boot" not defined
starting USB...
USB0: USB EHCI 1.00
scanning bus 0 for devices... 1 USB Device(s) found
   scanning usb for storage devices... 0 Storage Device(s) found

Device 0: unknown device
No ethernet found.
missing environment variable: pxeuuid
missing environment variable: bootfile
Retrieving file: pxelinux.cfg/00000000
No ethernet found.
missing environment variable: bootfile
Retrieving file: pxelinux.cfg/0000000
No ethernet found.
missing environment variable: bootfile
Retrieving file: pxelinux.cfg/000000
No ethernet found.
missing environment variable: bootfile
Retrieving file: pxelinux.cfg/00000
No ethernet found.
missing environment variable: bootfile
Retrieving file: pxelinux.cfg/0000
No ethernet found.
missing environment variable: bootfile
Retrieving file: pxelinux.cfg/000
No ethernet found.
missing environment variable: bootfile
Retrieving file: pxelinux.cfg/00
No ethernet found.
missing environment variable: bootfile
Retrieving file: pxelinux.cfg/0
No ethernet found.
missing environment variable: bootfile
Retrieving file: pxelinux.cfg/default-arm-rockchip
No ethernet found.
missing environment variable: bootfile
Retrieving file: pxelinux.cfg/default-arm
No ethernet found.
missing environment variable: bootfile
Retrieving file: pxelinux.cfg/default
No ethernet found.
Config file not found
No ethernet found.
=>

刷了V2.0固件后，系统起不来了是什么情况？

只看该作者 · 发表于 2020-10-31 11:03:39

刷入V2.0 无法启动后，用工具擦除TB-RK1808M0 失败后无法发现设备。。。

只看该作者 · 发表于 2020-11-2 16:03:46

如上LOG是没有成功烧写或烧写错误的boot_linux.img导致。
请确认：
1. 下载的boot_linux.img是否正确？正确的boot_linux.img的MD5值是:0cfd3dd1b8ef481856f4dfa3815b2888 boot_linux.img
2. 请确认boot_linux.img是否烧写成功？

只看该作者 · 发表于 2020-11-3 15:21:29

addy 发表于 2020-11-2 16:03
如上LOG是没有成功烧写或烧写错误的boot_linux.img导致。
请确认：
1. 下载的boot_linux.img是否正确？正 ...

同问。
我是用apt update & apt upgrade升级的，提示boot_linux安装失败，然后重启后无法启动系统了。
log如下：
root@debian10:/home/toybrick# sudo apt upgrade
Reading package lists... Done
Building dependency tree
Reading state information... Done
You might want to run 'apt --fix-broken install' to correct these.
The following packages have unmet dependencies:
rknn-rk1808 : Depends: boot-linux-rk1808 but it is not installed
E: Unmet dependencies. Try 'apt --fix-broken install' with no packages (or specify a solution).
root@debian10:/home/toybrick# apt --fix-broken install
Reading package lists... Done
Building dependency tree
Reading state information... Done
Correcting dependencies... Done
The following additional packages will be installed:
  boot-linux-rk1808
The following NEW packages will be installed:
  boot-linux-rk1808
0 upgraded, 1 newly installed, 0 to remove and 0 not upgraded.
65 not fully installed or removed.
Need to get 0 B/19.6 MB of archives.
After this operation, 26.8 MB of additional disk space will be used.
Do you want to continue? [Y/n]
perl: warning: Setting locale failed.
perl: warning: Please check that your locale settings:
      LANGUAGE = (unset),
      LC_ALL = (unset),
      LC_TIME = "zh_CN.UTF-8",
      LC_MONETARY = "zh_CN.UTF-8",
      LC_ADDRESS = "zh_CN.UTF-8",
      LC_TELEPHONE = "zh_CN.UTF-8",
      LC_NAME = "zh_CN.UTF-8",
      LC_MEASUREMENT = "zh_CN.UTF-8",
      LC_IDENTIFICATION = "zh_CN.UTF-8",
      LC_NUMERIC = "zh_CN.UTF-8",
      LC_PAPER = "zh_CN.UTF-8",
      LANG = "en_US.UTF-8"
are supported and installed on your system.
perl: warning: Falling back to the standard locale ("C").
locale: Cannot set LC_CTYPE to default locale: No such file or directory
locale: Cannot set LC_MESSAGES to default locale: No such file or directory
locale: Cannot set LC_ALL to default locale: No such file or directory
Setting up libcom-err2:arm64 (1.44.5-4) ...
Setting up libss2:arm64 (1.44.5-4) ...
Setting up mount (2.33.1-0.4) ...
Setting up systemd (241-7~deb10u4) ...
(Reading database ... 40328 files and directories currently installed.)
Preparing to unpack .../boot-linux-rk1808_2.0-1_arm64.deb ...
Unpacking boot-linux-rk1808 (2.0-1) ...
dpkg: error processing archive /var/cache/apt/archives/boot-linux-rk1808_2.0-1_arm64.deb (--unpack):
trying to overwrite '/boot/extlinux/Image', which is also in package boot-linux-m0 2.0-4
dpkg-deb: error: paste subprocess was killed by signal (Broken pipe)
Errors were encountered while processing:
/var/cache/apt/archives/boot-linux-rk1808_2.0-1_arm64.deb
E: Sub-process /usr/bin/dpkg returned an error code (1)

只看该作者 · 发表于 2020-11-3 16:49:16

参考： http://t.rock-chips.com/forum.ph ... p;tid=2381#lastpost

强制安装boot-linux-rk1808软件包，然后再执行apt upgrade.