|
|
你好，之前那块板子坏了，我们新买了一块RK3399ProX
登录进去了，但串口一直报下面这个错误信息，我们想确认一下，这块板子是否是正常的
[ 112.161432] wl_run_escan: LEGACY_SCAN sync ID: 4, bssidx: 0
[ 165.171472] wl_run_escan: LEGACY_SCAN sync ID: 5, bssidx: 0
[ 228.169897] wl_run_escan: LEGACY_SCAN sync ID: 6, bssidx: 0
[ 264.345328] stmmac_hw_setup: DMA engine initialization failed
[ 264.345890] stmmac_open: Hw setup failed
[ 272.496532] stmmac_hw_setup: DMA engine initialization failed
[ 272.497063] stmmac_open: Hw setup failed
[ 276.566501] wl_escan_set_scan: LEGACY_SCAN
[ 276.567557] CFG80211-ERROR) wl_escan_handler : escan is not ready ndev ffffffc0f311a000 drv_status 0x0 e_type 69 e_states 8
[ 276.569881] CFG80211-ERROR) wl_escan_handler : escan is not ready ndev ffffffc0f311a000 drv_status 0x0 e_type 69 e_states 8
[ 276.573697] CFG80211-ERROR) wl_escan_handler : escan is not ready ndev ffffffc0f311a000 drv_status 0x0 e_type 69 e_states 8
[ 276.575165] CFG80211-ERROR) wl_escan_handler : escan is not ready ndev ffffffc0f311a000 drv_status 0x0 e_type 69 e_states 8
[ 276.578862] CFG80211-ERROR) wl_escan_handler : escan is not ready ndev ffffffc0f311a000 drv_status 0x0 e_type 69 e_states 8
[ 276.583755] CFG80211-ERROR) wl_escan_handler : escan is not ready ndev ffffffc0f311a000 drv_status 0x0 e_type 69 e_states 8
[ 276.588382] CFG80211-ERROR) wl_escan_handler : escan is not ready ndev ffffffc0f311a000 drv_status 0x0 e_type 69 e_states 8
[ 276.608992] CFG80211-ERROR) wl_escan_handler : escan is not ready ndev ffffffc0f311a000 drv_status 0x0 e_type 69 e_states 8
[ 276.611198] CFG80211-ERROR) wl_escan_handler : escan is not ready ndev ffffffc0f311a000 drv_status 0x0 e_type 69 e_states 8
[ 276.614953] CFG80211-ERROR) wl_escan_handler : escan is not ready ndev ffffffc0f311a000 drv_status 0x0 e_type 69 e_states 8
[ 276.616488] CFG80211-ERROR) wl_escan_handler : escan is not ready ndev ffffffc0f311a000 drv_status 0x0 e_type 69 e_states 8
[ 276.632627] CFG80211-ERROR) wl_escan_handler : escan is not ready ndev ffffffc0f311a000 drv_status 0x0 e_type 69 e_states 8
[ 276.641457] CFG80211-ERROR) wl_escan_handler : escan is not ready ndev ffffffc0f311a000 drv_status 0x0 e_type 69 e_states 8
[ 276.650425] CFG80211-ERROR) wl_escan_handler : escan is not ready ndev ffffffc0f311a000 drv_status 0x0 e_type 69 e_states 8
[ 276.660010] CFG80211-ERROR) wl_escan_handler : escan is not ready ndev ffffffc0f311a000 drv_status 0x0 e_type 69 e_states 8
[ 276.664568] CFG80211-ERROR) wl_escan_handler : escan is not ready ndev ffffffc0f311a000 drv_status 0x0 e_type 69 e_states 8
[ 276.668483] CFG80211-ERROR) wl_escan_handler : escan is not ready ndev ffffffc0f311a000 drv_status 0x0 e_type 69 e_states 8
[ 276.698798] CFG80211-ERROR) wl_escan_handler : escan is not ready ndev ffffffc0f311a000 drv_status 0x0 e_type 69 e_states 8
[ 276.989127] CFG80211-ERROR) wl_escan_handler : escan is not ready ndev ffffffc0f311a000 drv_status 0x0 e_type 69 e_states 8
[ 276.990591] CFG80211-ERROR) wl_escan_handler : escan is not ready ndev ffffffc0f311a000 drv_status 0x0 e_type 69 e_states 8
[ 277.021585] CFG80211-ERROR) wl_escan_handler : escan is not ready ndev ffffffc0f311a000 drv_status 0x0 e_type 69 e_states 8
[ 277.026042] CFG80211-ERROR) wl_escan_handler : escan is not ready ndev ffffffc0f311a000 drv_status 0x0 e_type 69 e_states 8
[ 277.028211] CFG80211-ERROR) wl_escan_handler : escan is not ready ndev ffffffc0f311a000 drv_status 0x0 e_type 69 e_states 8
[ 277.031734] CFG80211-ERROR) wl_escan_handler : escan is not ready ndev ffffffc0f311a000 drv_status 0x0 e_type 69 e_states 8
[ 277.050763] CFG80211-ERROR) wl_escan_handler : escan is not ready ndev ffffffc0f311a000 drv_status 0x0 e_type 69 e_states 8
[ 277.067373] CFG80211-ERROR) wl_escan_handler : escan is not ready ndev ffffffc0f311a000 drv_status 0x0 e_type 69 e_states 8
[ 277.308080] CFG80211-ERROR) wl_escan_handler : escan is not ready ndev ffffffc0f311a000 drv_status 0x0 e_type 69 e_states 8
[ 277.331620] CFG80211-ERROR) wl_escan_handler : escan is not ready ndev ffffffc0f311a000 drv_status 0x0 e_type 69 e_states 8
[ 277.352562] CFG80211-ERROR) wl_escan_handler : escan is not ready ndev ffffffc0f311a000 drv_status 0x0 e_type 69 e_states 8
[ 277.356024] CFG80211-ERROR) wl_escan_handler : escan is not ready ndev ffffffc0f311a000 drv_status 0x0 e_type 69 e_states 8
[ 277.390863] CFG80211-ERROR) wl_escan_handler : escan is not ready ndev ffffffc0f311a000 drv_status 0x0 e_type 69 e_states 8
[ 277.411526] CFG80211-ERROR) wl_escan_handler : escan is not ready ndev ffffffc0f311a000 drv_status 0x0 e_type 69 e_states 8
[ 277.413815] CFG80211-ERROR) wl_escan_handler : escan is not ready ndev ffffffc0f311a000 drv_status 0x0 e_type 69 e_states 8
[ 277.433098] CFG80211-ERROR) wl_escan_handler : escan is not ready ndev ffffffc0f311a000 drv_status 0x0 e_type 69 e_states 8
[ 277.436487] CFG80211-ERROR) wl_escan_handler : escan is not ready ndev ffffffc0f311a000 drv_status 0x0 e_type 69 e_states 8
[ 277.439700] CFG80211-ERROR) wl_escan_handler : escan is not ready ndev ffffffc0f311a000 drv_status 0x0 e_type 69 e_states 8
[ 277.509509] CFG80211-ERROR) wl_escan_handler : escan is not ready ndev ffffffc0f311a000 drv_status 0x0 e_type 69 e_states 8
[ 277.512873] CFG80211-ERROR) wl_escan_handler : escan is not ready ndev ffffffc0f311a000 drv_status 0x0 e_type 69 e_states 8
[ 277.647604] CFG80211-ERROR) wl_escan_handler : escan is not ready ndev ffffffc0f311a000 drv_status 0x0 e_type 69 e_states 8
[ 277.662893] CFG80211-ERROR) wl_escan_handler : escan is not ready ndev ffffffc0f311a000 drv_status 0x0 e_type 69 e_states 8
[ 277.889445] CFG80211-ERROR) wl_escan_handler : escan is not ready ndev ffffffc0f311a000 drv_status 0x0 e_type 69 e_states 8
[ 277.922102] CFG80211-ERROR) wl_escan_handler : escan is not ready ndev ffffffc0f311a000 drv_status 0x0 e_type 69 e_states 8
[ 278.052939] CFG80211-ERROR) wl_escan_handler : escan is not ready ndev ffffffc0f311a000 drv_status 0x0 e_type 69 e_states 8
[ 278.054247] CFG80211-ERROR) wl_escan_handler : escan is not ready ndev ffffffc0f311a000 drv_status 0x0 e_type 69 e_states 8
[ 278.055738] CFG80211-ERROR) wl_escan_handler : escan is not ready ndev ffffffc0f311a000 drv_status 0x0 e_type 69 e_states 8
[ 278.084888] CFG80211-ERROR) wl_escan_handler : escan is not ready ndev ffffffc0f311a000 drv_status 0x0 e_type 69 e_states 8
[ 278.086971] CFG80211-ERROR) wl_escan_handler : escan is not ready ndev ffffffc0f311a000 drv_status 0x0 e_type 69 e_states 8
[ 278.090906] CFG80211-ERROR) wl_escan_handler : escan is not ready ndev ffffffc0f311a000 drv_status 0x0 e_type 69 e_states 8
[ 278.100941] CFG80211-ERROR) wl_escan_handler : escan is not ready ndev ffffffc0f311a000 drv_status 0x0 e_type 69 e_states 8
[ 278.116393] CFG80211-ERROR) wl_escan_handler : escan is not ready ndev ffffffc0f311a000 drv_status 0x0 e_type 69 e_states 8
[ 278.215083] CFG80211-ERROR) wl_escan_handler : escan is not ready ndev ffffffc0f311a000 drv_status 0x0 e_type 69 e_states 8
[ 278.216524] CFG80211-ERROR) wl_escan_handler : escan is not ready ndev ffffffc0f311a000 drv_status 0x0 e_type 69 e_states 8
[ 278.231878] CFG80211-ERROR) wl_escan_handler : escan is not ready ndev ffffffc0f311a000 drv_status 0x0 e_type 69 e_states 8
[ 278.248253] CFG80211-ERROR) wl_escan_handler : escan is not ready ndev ffffffc0f311a000 drv_status 0x0 e_type 69 e_states 8
[ 278.249772] CFG80211-ERROR) wl_escan_handler : escan is not ready ndev ffffffc0f311a000 drv_status 0x0 e_type 69 e_states 8
[ 278.908372] CFG80211-ERROR) wl_escan_handler : escan is not ready ndev ffffffc0f311a000 drv_status 0x0 e_type 69 e_states 0
[ 291.131426] wl_run_escan: LEGACY_SCAN sync ID: 7, bssidx: 0
toybrick@debian10:~$ [ 310.225496] stmmac_hw_setup: DMA engine initialization failed
[ 310.226033] stmmac_open: Hw setup failed
[ 310.237165] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 310.355286] stmmac_hw_setup: DMA engine initialization failed
[ 310.355826] stmmac_open: Hw setup failed
[ 310.366792] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 310.481555] stmmac_hw_setup: DMA engine initialization failed
[ 310.482083] stmmac_open: Hw setup failed
[ 310.485519] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 310.591766] stmmac_hw_setup: DMA engine initialization failed
[ 310.592283] stmmac_open: Hw setup failed
[ 310.595913] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
|
|
闽公网安备 35010202001061号