Transfer interface open failed!，求大神指导。。

只看该作者 · 发表于 2019-5-17 19:42:59

zhangzj 发表于 2019-5-17 17:45
E RKNNAPI: rknn_init, attr[0].fmt = 1, expect RKNN_TENSOR_NCHW(0)!
rknn_init fail! ret=-6

大佬，我换了一个demo，错误有变成这样：
[root@localhost build]# ./ssd_demo
loading model...
[  198.237767] usb 2-1.1: USB disconnect, device number 5
E RKNNAPI: rknn_init,  recv(MsgLoadAck) fail, -9 != 368!
rknn_init fail! ret=-3
load_model error!!!
然后lsusb：
[root@localhost build]# lsusb
Bus 002 Device 006: ID 2207:1808
Bus 002 Device 002: ID 05e3:0616 Genesys Logic, Inc. hub
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 004: ID 1058:25a2 Western Digital Technologies, Inc. Elements 25A2
Bus 001 Device 002: ID 05e3:0610 Genesys Logic, Inc. 4-port hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 002: ID 0bda:d723 Realtek Semiconductor Corp.
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
请教大佬。。

只看该作者 · 发表于 2019-5-20 09:23:53

试一下我编的这个rknn_ssd

Transfer interface open failed!，求大神指导。。

本帖子中包含更多资源