|
|
[11:57:55.838]收←◆DDR Version 1.24 20191016
In
[11:57:55.904]收←◆channel 0
CS = 0
MR0=0x98
MR4=0x1
MR5=0xFF
MR8=0x10
MR12=0x72
MR14=0x72
MR18=0x0
MR19=0x0
MR24=0x8
MR25=0x0
channel 1
CS = 0
MR0=0x98
MR4=0x1
MR5=0xFF
MR8=0x10
MR12=0x72
MR14=0x72
MR18=0x0
MR19=0x0
MR24=0x8
MR25=0x0
channel 0 training pass!
channel 1 training pass!
change freq to 416MHz 0,1
Channel 0: LPDDR4,416MHz
Bus Width=32 Col=10 Bank=8 Row=16 CS=1 Die Bus-Width=16 Size=2048MB
Channel 1: LPDDR4,416MHz
Bus Width=32 Col=10 Bank=8 Row=16 CS=1 Die Bus-Width=16 Size=2048MB
256B stride
channel 0
CS = 0
MR0=0x98
MR4=0x1
MR5=0xFF
MR8=0x10
MR12=0x72
MR14=0x72
MR18=0x0
MR19=0x0
MR24=0x8
MR25=0x0
channel 1
CS = 0
MR0=0x98
MR4=0x1
MR5=0xFF
MR8=0x10
MR12=0x72
MR14=0x72
MR18=0x0
MR19=0x0
MR24=0x8
MR25=0x0
channel 0 training pass!
channel 1 training pass!
[11:57:56.191]收←◆channel 0, cs 0, advanced training done
[11:57:56.496]收←◆channel 1, cs 0, advanced training done
change freq to 856MHz 1,0
ch 0 ddrconfig = 0x101, ddrsize = 0x40
ch 1 ddrconfig = 0x101, ddrsize = 0x40
pmugrf_os_reg[2] = 0x32C1F2C1, stride = 0xD
ddr_set_rate to 328MHZ
ddr_set_rate to 666MHZ
ddr_set_rate to 416MHZ, ctl_index 0
ddr_set_rate to 856MHZ, ctl_index 1
support 416 856 328 666 MHz, current 856MHz
OUT
[11:57:56.541]收←◆Boot1: 2019-03-14, version: 1.19
CPUId = 0x0
ChipType = 0x10, 256
[11:57:56.634]收←◆SdmmcInit=2 0
BootCapSize=100000
UserCapSize=29820MB
FwPartOffset=2000 , 100000
mmc0:cmd8,20
mmc0:cmd5,20
mmc0:cmd55,20
mmc0:cmd1,20
mmc0:cmd8,20
mmc0:cmd5,20
mmc0:cmd55,20
mmc0:cmd1,20
mmc0:cmd8,20
mmc0:cmd5,20
mmc0:cmd55,20
mmc0:cmd1,20
SdmmcInit=0 1
StorageInit ok = 67856
SecureMode = 0
SecureInit read PBA: 0x4
SecureInit read PBA: 0x404
SecureInit read PBA: 0x804
SecureInit read PBA: 0xc04
SecureInit read PBA: 0x1004
SecureInit read PBA: 0x1404
SecureInit read PBA: 0x1804
SecureInit read PBA: 0x1c04
SecureInit ret = 0, SecureMode = 0
atags_set_bootdev: ret 0)
GPT part: 0, name: uboot, start:0x2000, size:0x2000
GPT part: 1, name: trust, start:0x4000, size:0x2000
GPT part: 2, name: boot_linux, start:0x6000, size:0x30000
GPT part: 3, name: rootfs, start:0x36000, size:0x3a07fdf
find part:uboot OK. first_lba:0x2000.
find part:trust OK. first_lba:0x4000.
LoadTrust Addr:0x4000
No find bl30.bin
Load uboot, ReadLba = 2000
Load OK, addr=0x200000, size=0xf4014
[11:57:56.678]收←◆RunBL31 0x40000
NOTICE: BL31: v1.3(debug):42583b6
NOTICE: BL31: Built : 07:55:13, Oct 15 2019
NOTICE: BL31: Rockchip release version: v1.1
INFO: GICv3 with legacy support detected. ARM GICV3 driver initialized in EL3
INFO: Using opteed sec cpu_context!
INFO: boot cpu mask: 0
INFO: plat_rockchip_pmu_init(1190): pd status 3e
INFO: BL31: Initializing runtime services
INFO: BL31: Initializing BL32
INF [0x0] TEE-CORE:init_primary_helper:337: Initializing (1.1.0-230-g6c76e8a9 #191 Mon Nov 18 07:00:24 UTC 2019 aarch64)
INF [0x0] TEE-CORE:init_primary_helper:338: Release version: 1.2
INF [0x0] TEE-CORE:init_teecore:83: teecore inits done
INFO: BL31: Preparing for EL3 exit to normal world
INFO: Entry point address = 0x200000
INFO: SPSR = 0x3c9
[11:57:56.809]收←◆
U-Boot 2017.09 (Aug 18 2022 - 11:20:20 +0800)
Model: Rockchip RK3399 Evaluation Board
PreSerial: 2
DRAM: 3.8 GiB
Sysmem: init
Relocation Offset is: f5bd0000
[11:57:56.855]收←◆Using default environment
dwmmc@fe320000: 1, sdhci@fe330000: 0
[11:57:57.005]收←◆Bootdev(atags): mmc 0
MMC0: HS400, 150Mhz
PartType: EFI
rockchip_get_boot_mode: Could not found misc partition
boot mode: None
init_resource_list: failed to get boot part, ret=-1
init_resource_list: failed to get resource part, ret=-1
Distro DTB: /extlinux/toybrick.dtb
[11:57:57.070]收←◆104938 bytes read in 61 ms (1.6 MiB/s)
[11:57:57.120]收←◆I2c0 speed: 400000Hz
PMIC: RK8090 (on=0x40, off=0x00)
Plug out interrupt
vdd_center 900000 uV
vdd_cpu_l 900000 uV
Warn: can't find connect driver
Warn: can't find connect driver
Failed to found available display route
Warn: can't find connect driver
Warn: can't find connect driver
Failed to found available display route
CLK: (uboot. arml: enter 816000 KHz, init 816000 KHz, kernel 0N/A)
CLK: (uboot. armb: enter 24000 KHz, init 24000 KHz, kernel 0N/A)
aplll 816000 KHz
apllb 24000 KHz
dpll 856000 KHz
cpll 24000 KHz
gpll 800000 KHz
npll 600000 KHz
vpll 24000 KHz
aclk_perihp 133333 KHz
hclk_perihp 66666 KHz
pclk_perihp 33333 KHz
aclk_perilp0 266666 KHz
hclk_perilp0 88888 KHz
pclk_perilp0 44444 KHz
hclk_perilp1 100000 KHz
pclk_perilp1 50000 KHz
Net:
[11:57:57.231]收←◆eth0: ethernet@fe300000
[11:57:57.265]收←◆Hit key to stop autoboot('CTRL+C'): 0
Could not find misc partition
ANDROID: reboot reason: "(none)"
Not AVB images, AVB skip
load_android_image: Can't find part: boot
Android image load failed
Android boot failed, error -1.
do_boot_rockchip: Could not find misc partition
do_boot_rockchip: Could not find rootfs part
Card did not respond to voltage select!
mmc_init: -95, time 9
switch to partitions #0, OK
mmc0(part 0) is current device
Scanning mmc 0:3...
[11:57:57.320]收←◆Found /extlinux/extlinux.conf
Retrieving file: /extlinux/extlinux.conf
[11:57:57.370]收←◆237 bytes read in 44 ms (4.9 KiB/s)
1: rockchip-kernel-4.4
Retrieving file: /initramfs-toybrick-2.0.img
[11:57:57.550]收←◆16096158 bytes read in 174 ms (88.2 MiB/s)
Retrieving file: /extlinux/Image
[11:57:57.816]收←◆20727816 bytes read in 258 ms (76.6 MiB/s)
append: earlycon=uart8250,mmio32,0xff1a0000 initrd=/initramfs-toybrick-2.0.img root=PARTUUID=614e0000-0000-4b53-8000-1d28000054a9 rw rootwait rootfstype=ext4
Retrieving file: /extlinux/toybrick.dtb
[11:57:57.883]收←◆104938 bytes read in 61 ms (1.6 MiB/s)
## Flattened Device Tree blob at 08300000
Booting using the fdt blob at 0x8300000
Loading Ramdisk to f2e67000, end f3dc0b9e ...
[11:57:57.951]收←◆OK
Loading Device Tree to 00000000f2e4a000, end 00000000f2e669e9 ... OK
Adding bank: 0x00200000 - 0x08400000 (size: 0x08200000)
Adding bank: 0x0a200000 - 0xf8000000 (size: 0xede00000)
Total: 1261.207 ms
Starting kernel ...
[11:57:57.987]收←◆[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 4.4.189 (cxh@inno) (gcc version 6.3.1 20170404 (Linaro GCC 6.3-2017.05) ) #13 SMP Fri May 8 14:39:03 CST 2020
[ 0.000000] Boot CPU: AArch64 Processor [410fd034]
[ 0.000000] earlycon: Early serial console at MMIO32 0xff1a0000 (options '')
[ 0.000000] bootconsole [uart0] enabled
[ 0.000000] Reserved memory: failed to reserve memory for node 'drm-logo@00000000': base 0x0000000000000000, size 0 MiB
[ 0.000000] Reserved memory: failed to reserve memory for node 'stb-devinfo@00000000': base 0x0000000000000000, size 0 MiB
[ 0.000000] cma: Reserved 256 MiB at 0x00000000e2c00000
[11:57:58.169]收←◆[ 0.000000] psci: probing for conduit method from DT.
[ 0.000000] psci: PSCIv1.0 detected in firmware.
[ 0.000000] psci: Using standard PSCI v0.2 function IDs
[ 0.000000] psci: Trusted OS migration not required
[ 0.000000] PERCPU: Embedded 21 pages/cpu @ffffffc0f7ecc000 s46120 r8192 d31704 u86016
[ 0.000000] Detected VIPT I-cache on CPU0
[ 0.000000] CPU features: enabling workaround for ARM erratum 845719
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 991752
[ 0.000000] Kernel command line: earlycon=uart8250,mmio32,0xff1a0000 root=PARTUUID=614e0000-0000-4b53-8000-1d28000054a9 rw rootwait rootfstype=ext4 swiotlb=1 coherent_pool=1m
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.000000] software IO TLB: mapped [mem 0xf7e84000-0xf7ec4000] (0MB)
[11:57:58.278]收←◆[ 0.000000] Memory: 3657000K/4030464K available (12478K kernel code, 1810K rwdata, 4740K rodata, 1152K init, 1985K bss, 111320K reserved, 262144K cma-reserved)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB)
[ 0.000000] vmalloc : 0xffffff8008000000 - 0xffffffbdbfff0000 ( 246 GB)
[ 0.000000] .init : 0xffffff8009160000 - 0xffffff8009280000 ( 1152 KB)
[ 0.000000] .text : 0xffffff8008080000 - 0xffffff8008cb0000 ( 12480 KB)
[ 0.000000] .rodata : 0xffffff8008cb0000 - 0xffffff8009160000 ( 4800 KB)
[ 0.000000] .data : 0xffffff8009280000 - 0xffffff8009444808 ( 1811 KB)
[ 0.000000] vmemmap : 0xffffffbdc0000000 - 0xffffffbfc0000000 ( 8 GB maximum)
[ 0.000000] 0xffffffbdc0008000 - 0xffffffbdc3e00000 ( 61 MB actual)
[ 0.000000] fixed : 0xffffffbffe7fb000 - 0xffffffbffec00000 ( 4116 KB)
[ 0.000000] PCI I/O : 0xffffffbffee00000 - 0xffffffbfffe00000 ( 16 MB)
[ 0.000000] memory : 0xffffffc000200000 - 0xffffffc0f8000000 ( 3966 MB)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 64.
[ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=6.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=6
[ 0.000000] NR_IRQS:64 nr_irqs:64 0
[ 0.000000] GIC: Using split EOI/Deactivate mode
[ 0.000000] ITS: /interrupt-controller@fee00000/interrupt-controller@fee20000
[ 0.000000] ITS: allocated 65536 Devices @a280000 (psz 64K, shr 0)
[ 0.000000] ITS: using cache flushing for cmd queue
[ 0.000000] GIC: using LPI property table @0x000000000a210000
[ 0.000000] ITS: Allocated 1792 chunks for LPIs
[ 0.000000] CPU0: found redistributor 0 region 0:0x00000000fef00000
[ 0.000000] CPU0: using LPI pending table @0x000000000a220000
[ 0.000000] GIC: using cache flushing for LPI property table
[ 0.000000] GIC: PPI partition interrupt-partition-0[0] { /cpus/cpu@0[0] /cpus/cpu@1[1] /cpus/cpu@2[2] /cpus/cpu@3[3] }
[ 0.000000] GIC: PPI partition interrupt-partition-1[1] { /cpus/cpu@100[4] /cpus/cpu@101[5] }
[11:57:58.308]收←◆[ 0.000000] rockchip_clk_register_frac_branch: could not find dclk_vop0_frac as parent of dclk_vop0, rate changes may not work
[ 0.000000] rockchip_clk_register_frac_branch: could not find dclk_vop1_frac as parent of dclk_vop1, rate changes may not work
[ 0.000000] rockchip_cpuclk_pre_rate_change: limiting alt-divider 33 to 31
[11:57:58.377]收←◆[ 0.000000] Architected cp15 timer(s) running at 24.00MHz (phys).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[ 0.000006] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[ 0.002244] Console: colour dummy device 80x25
[ 0.002676] console [tty0] enabled
[ 0.003011] bootconsole [uart0] disabled
[11:57:58.589]收←◆[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 4.4.189 (cxh@inno) (gcc version 6.3.1 20170404 (Linaro GCC 6.3-2017.05) ) #13 SMP Fri May 8 14:39:03 CST 2020
[ 0.000000] Boot CPU: AArch64 Processor [410fd034]
[ 0.000000] earlycon: Early serial console at MMIO32 0xff1a0000 (options '')
[ 0.000000] bootconsole [uart0] enabled
[ 0.000000] Reserved memory: failed to reserve memory for node 'drm-logo@00000000': base 0x0000000000000000, size 0 MiB
[ 0.000000] Reserved memory: failed to reserve memory for node 'stb-devinfo@00000000': base 0x0000000000000000, size 0 MiB
[ 0.000000] cma: Reserved 256 MiB at 0x00000000e2c00000
[ 0.000000] psci: probing for conduit method from DT.
[ 0.000000] psci: PSCIv1.0 detected in firmware.
[ 0.000000] psci: Using standard PSCI v0.2 function IDs
[ 0.000000] psci: Trusted OS migration not required
[ 0.000000] PERCPU: Embedded 21 pages/cpu @ffffffc0f7ecc000 s46120 r8192 d31704 u86016
[ 0.000000] Detected VIPT I-cache on CPU0
[ 0.000000] CPU features: enabling workaround for ARM erratum 845719
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 991752
[ 0.000000] Kernel command line: earlycon=uart8250,mmio32,0xff1a0000 root=PARTUUID=614e0000-0000-4b53-8000-1d28000054a9 rw rootwait rootfstype=ext4 swiotlb=1 coherent_pool=1m
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.000000] software IO TLB: mapped [mem 0xf7e84000-0xf7ec4000] (0MB)
[ 0.000000] Memory: 3657000K/4030464K available (12478K kernel code, 1810K rwdata, 4740K rodata, 1152K init, 1985K bss, 111320K reserved, 262144K cma-reserved)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB)
[ 0.000000] vmalloc : 0xffffff8008000000 - 0xffffffbdbfff0000 ( 246 GB)
[ 0.000000] .init : 0xffffff8009160000 - 0xffffff8009280000 ( 1152 KB)
[ 0.000000] .text : 0xffffff8008080000 - 0xffffff8008cb0000 ( 12480 KB)
[ 0.000000] .rodata : 0xffffff8008cb0000 - 0xffffff8009160000 ( 4800 KB)
[ 0.000000] .data : 0xffffff8009280000 - 0xffffff8009444808 ( 1811 KB)
[ 0.000000] vmemmap : 0xffffffbdc0000000 - 0xffffffbfc0000000 ( 8 GB maximum)
[ 0.000000] 0xffffffbdc0008000 - 0xffffffbdc3e00000 ( 61 MB actual)
[ 0.000000] fixed : 0xffffffbffe7fb000 - 0xffffffbffec00000 ( 4116 KB)
[ 0.000000] PCI I/O : 0xffffffbffee00000 - 0xffffffbfffe00000 ( 16 MB)
[ 0.000000] memory : 0xffffffc000200000 - 0xffffffc0f8000000 ( 3966 MB)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 64.
[ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=6.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=6
[ 0.000000] NR_IRQS:64 nr_irqs:64 0
[ 0.000000] GIC: Using split EOI/Deactivate mode
[ 0.000000] ITS: /interrupt-controller@fee00000/interrupt-controller@fee20000
[ 0.000000] ITS: allocated 65536 Devices @a280000 (psz 64K, shr 0)
[ 0.000000] ITS: using cache flushing for cmd queue
[ 0.000000] GIC: using LPI property table @0x000000000a210000
[ 0.000000] ITS: Allocated 1792 chunks for LPIs
[ 0.000000] CPU0: found redistributor 0 region 0:0x00000000fef00000
[ 0.000000] CPU0: using LPI pending table @0x000000000a220000
[ 0.000000] GIC: using cache flushing for LPI property table
[ 0.000000] GIC:
[11:57:58.620]收←◆PPI partition interrupt-partition-0[0] { /cpus/cpu@0[0] /cpus/cpu@1[1] /cpus/cpu@2[2] /cpus/cpu@3[3] }
[ 0.000000] GIC: PPI partition interrupt-partition-1[1] { /cpus/cpu@100[4] /cpus/cpu@101[5] }
[ 0.000000] rockchip_clk_register_frac_branch: could not find dclk_vop0_frac as parent of dclk_vop0, rate changes may not work
[ 0.000000] rockchip_clk_register_frac_branch: could not find dclk_vop1_frac as parent of dclk_vop1, rate changes may not work
[ 0.000000] rockchip_cpuclk_pre_rate_change: limiting alt-divider 33 to 31
[ 0.000000] Architected cp15 timer(s) running at 24.00MHz (phys).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[ 0.000006] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[ 0.002244] Console: colour dummy device 80x25
[ 0.002676] console [tty0] enabled
[ 0.003011] bootconsole [uart0] disabled
[ 0.003421] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=24000)
[ 0.003449] pid_max: default: 32768 minimum: 301
[ 0.003610] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.003632] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.004462] Initializing cgroup subsys devices
[ 0.004488] Initializing cgroup subsys freezer
[ 0.004514] Initializing cgroup subsys net_cls
[ 0.004548] ftrace: allocating 45500 entries in 178 pages
[ 0.125237] sched-energy: Sched-energy-costs installed from DT
[ 0.125270] CPU0: update cpu_capacity 401
[ 0.125336] ASID allocator initialised with 32768 entries
[ 0.128951] PCI/MSI: /interrupt-controller@fee00000/interrupt-controller@fee20000 domain created
[ 0.129595] Platform MSI: /interrupt-controller@fee00000/interrupt-controller@fee20000 domain created
[ 0.131127] Detected VIPT I-cache on CPU1
[ 0.131167] CPU1: found redistributor 1 region 0:0x00000000fef20000
[ 0.131204] CPU1: using LPI pending table @0x00000000e1cc0000
[ 0.131266] CPU1: update cpu_capacity 401
[ 0.131270] CPU1: Booted secondary processor [410fd034]
[ 0.132141] Detected VIPT I-cache on CPU2
[ 0.132175] CPU2: found redistributor 2 region 0:0x00000000fef40000
[ 0.132212] CPU2: using LPI pending table @0x00000000e1ce0000
[ 0.132269] CPU2: update cpu_capacity 401
[ 0.132273] CPU2: Booted secondary processor [410fd034]
[ 0.133132] Detected VIPT I-cache on CPU3
[ 0.133164] CPU3: found redistributor 3 region 0:0x00000000fef60000
[ 0.133201] CPU3: using LPI pending table @0x00000000e1d40000
[ 0.133255] CPU3: update cpu_capacity 401
[ 0.133259] CPU3: Booted secondary processor [410fd034]
[ 0.134131] Detected PIPT I-cache on CPU4
[ 0.134158] CPU4: found redistributor 100 region 0:0x00000000fef80000
[ 0.134199] CPU4: using LPI pending table @0x00000000e1d70000
[ 0.134237] CPU4: update cpu_capacity 1024
[ 0.134240] CPU4: Booted secondary processor [410fd082]
[ 0.134954] Detected PIPT I-cache on CPU5
[ 0.134983] CPU5: found redistributor 101 region 0:0x00000000fefa0000
[ 0.135023] CPU5: using LPI pending table @0x00000000e1da0000
[ 0.135062] CPU5: update cpu_capacity 1024
[ 0.135065] CPU5: Booted secondary processor [410fd082]
[ 0.135167] Brought up 6 CPUs
[ 0.135718] SMP: Total of 6 processors activated.
[ 0.135748] CPU features: detected feature: GIC system register CPU interface
[ 0.135780] CPU features: detected feature: 32-bit EL0 Support
[ 0.135813] CPU: All CPU(s) started at EL2
[ 0.135881] alternatives: patching kernel code
[ 0.137329] devtmpfs: initialized
[ 0.154899] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[ 0.154959] futex hash table entries: 2048 (order: 5, 131072 bytes)
[ 0.162326] pinctrl core: initialized pinctrl subsystem
[ 0.163206] NET: Registered protocol family 16
[ 0.168302] cpuidle: using governor ladder
[ 0.172308] cpuidle: using governor menu
[ 0.172344] Registered FIQ tty driver
[ 0.172588] vdso: 2 pages (1 code @ ffffff8008cb6000, 1 data @ ffffff8009284000)
[ 0.172645] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[ 0.173751] DMA: preallocated 1024 KiB pool for atomic allocations
[ 0.198566] console [pstore-1] enabled
[ 0.198593] pstore: Registered ramoops as persistent store backend
[ 0.198617] ramoops: attached 0xf0000@0x110000, ecc: 0/0
[ 0.265245] console [ttyFIQ0] enabled
[ 0.265819] Registered fiq debugger ttyFIQ0
[11:57:58.694]收←◆[ 0.298605] iommu: Adding device ff650000.vpu_service to group 0
[ 0.299247] iommu: Adding device ff660000.rkvdec to group 1
[ 0.299826] iommu: Adding device ff670000.iep to group 2
[ 0.300424] iommu: Adding device ff8f0000.vop to group 3
[ 0.300994] iommu: Adding device ff900000.vop to group 4
[ 0.301617] iommu: Adding device ff920000.cif_isp to group 5
[ 0.302237] iommu: Adding device ff920000.isp to group 6
[ 0.303157] rk_iommu ff650800.iommu: can't get sclk
[ 0.303881] rk_iommu ff660480.iommu: can't get sclk
[ 0.304409] rk_iommu ff670800.iommu: can't get aclk
[ 0.304872] rk_iommu ff670800.iommu: can't get hclk
[ 0.305322] rk_iommu ff670800.iommu: can't get sclk
[ 0.305957] rk_iommu ff8f3f00.iommu: can't get sclk
[ 0.306562] rk_iommu ff903f00.iommu: can't get sclk
[ 0.307187] rk_iommu ff924000.iommu: can't get sclk
[ 0.307995] SCSI subsystem initialized
[ 0.308538] usbcore: registered new interface driver usbfs
[ 0.309085] usbcore: registered new interface driver hub
[ 0.309659] usbcore: registered new device driver usb
[ 0.310183] media: Linux media interface: v0.10
[ 0.310642] Linux video capture interface: v2.00
[ 0.311144] pps_core: LinuxPPS API ver. 1 registered
[ 0.311613] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.312459] PTP clock support registered
[ 0.314052] Advanced Linux Sound Architecture Driver Initialized.
[ 0.315139] Bluetooth: Core ver 2.21
[ 0.315495] NET: Registered protocol family 31
[ 0.315920] Bluetooth: HCI device and connection manager initialized
[ 0.316503] Bluetooth: HCI socket layer initialized
[ 0.316965] Bluetooth: L2CAP socket layer initialized
[ 0.317443] Bluetooth: SCO socket layer initialized
[ 0.318544] rockchip-cpuinfo cpuinfo: Serial : dc4252b6840b9b08
[ 0.319644] clocksource: Switched to clocksource arch_sys_counter
[11:57:58.756]收←◆[ 0.370195] thermal thermal_zone1: power_allocator: sustainable_power will be estimated
[ 0.371166] NET: Registered protocol family 2
[ 0.372037] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.372979] TCP bind hash table entries: 32768 (order: 8, 1048576 bytes)
[ 0.374562] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.375294] UDP hash table entries: 2048 (order: 5, 196608 bytes)
[ 0.376027] UDP-Lite hash table entries: 2048 (order: 5, 196608 bytes)
[ 0.376997] NET: Registered protocol family 1
[ 0.377720] RPC: Registered named UNIX socket transport module.
[ 0.378264] RPC: Registered udp transport module.
[ 0.378711] RPC: Registered tcp transport module.
[ 0.379147] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.380552] Trying to unpack rootfs image as initramfs...
[11:57:59.522]收←◆[ 1.108738] Freeing initrd memory: 15716K
[ 1.109605] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available
[ 1.110457] hw perfevents: enabled with armv8_cortex_a72 PMU driver, 7 counters available
[ 1.114584] Initialise system trusted keyring
[ 1.123014] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 1.124323] NFS: Registering the id_resolver key type
[ 1.124822] Key type id_resolver registered
[ 1.125213] Key type id_legacy registered
[ 1.125659] ntfs: driver 2.1.32 [Flags: R/O].
[ 1.126287] fuse init (API version 7.23)
[ 1.127039] SGI XFS with security attributes, no debug enabled
[ 1.132710] NET: Registered protocol family 38
[ 1.133141] Key type asymmetric registered
[ 1.133524] Asymmetric key parser 'x509' registered
[ 1.134146] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
[ 1.134852] io scheduler noop registered
[ 1.135224] io scheduler deadline registered
[ 1.135748] io scheduler cfq registered (default)
[ 1.137243] rockchip-usb2phy ff770000.syscon:usb2-phy@e460: failed to create phy
[ 1.143496] rockchip-pcie f8000000.pcie: no vpcie3v3 regulator found
[ 1.144118] rockchip-pcie f8000000.pcie: no vpcie1v8 regulator found
[ 1.144728] rockchip-pcie f8000000.pcie: no vpcie0v9 regulator found
[ 1.145307] rockchip-pcie f8000000.pcie: missing "memory-region" property
[ 1.145935] PCI host bridge /pcie@f8000000 ranges:
[ 1.146386] MEM 0xfa000000..0xfbdfffff -> 0xfa000000
[ 1.146869] IO 0xfbe00000..0xfbefffff -> 0xfbe00000
[11:57:59.614]收←◆[ 1.201018] rockchip-pcie f8000000.pcie: PCI host bridge to bus 0000:00
[ 1.201626] pci_bus 0000:00: root bus resource [bus 00-1f]
[ 1.202151] pci_bus 0000:00: root bus resource [mem 0xfa000000-0xfbdfffff]
[ 1.202790] pci_bus 0000:00: root bus resource [io 0x0000-0xfffff] (bus address [0xfbe00000-0xfbefffff])
[ 1.204056] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[ 1.205009] pci 0000:01:00.0: reg 0x10: initial BAR value 0x00000000 invalid
[ 1.207718] pci 0000:00:00.0: BAR 8: assigned [mem 0xfa000000-0xfa0fffff]
[ 1.208338] pci 0000:01:00.0: BAR 4: assigned [mem 0xfa000000-0xfa003fff 64bit]
[ 1.209036] pci 0000:01:00.0: BAR 2: assigned [mem 0xfa004000-0xfa004fff 64bit]
[ 1.209730] pci 0000:01:00.0: BAR 0: no space for [io size 0x0100]
[ 1.210297] pci 0000:01:00.0: BAR 0: failed to assign [io size 0x0100]
[ 1.210909] pci 0000:00:00.0: PCI bridge to [bus 01]
[ 1.211374] pci 0000:00:00.0: bridge window [mem 0xfa000000-0xfa0fffff]
[ 1.212049] pcieport 0000:00:00.0: enabling device (0000 -> 0002)
[ 1.212841] pcieport 0000:00:00.0: Signaling PME through PCIe PME interrupt
[ 1.213478] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
[ 1.214837] backlight supply power not found, using dummy regulator
[ 1.215928] rk-vcodec ff650000.vpu_service: no regulator for vcodec
[ 1.216780] rk-vcodec ff650000.vpu_service: probe device
[ 1.217488] rk-vcodec ff650000.vpu_service: drm allocator with mmu enabled
[ 1.218780] rk-vcodec ff650000.vpu_service: could not find power_model node
[ 1.219420] rk-vcodec ff650000.vpu_service: init success
[ 1.220169] rk-vcodec ff660000.rkvdec: no regulator for vcodec
[ 1.221154] rk-vcodec ff660000.rkvdec: probe device
[ 1.221821] rk-vcodec ff660000.rkvdec: drm allocator with mmu enabled
[ 1.222814] rk-vcodec ff660000.rkvdec: could not find power_model node
[ 1.223406] rk-vcodec ff660000.rkvdec: init success
[ 1.225695] dma-pl330 ff6d0000.dma-controller: Loaded driver for PL330 DMAC-241330
[ 1.226396] dma-pl330 ff6d0000.dma-controller: DBUFF-32x8bytes Num_Chans-6 Num_Peri-12 Num_Events-12
[ 1.228750] dma-pl330 ff6e0000.dma-controller: Loaded driver for PL330 DMAC-241330
[ 1.229449] dma-pl330 ff6e0000.dma-controller: DBUFF-128x8bytes Num_Chans-8 Num_Peri-20 Num_Events-16
[ 1.231322] rockchip-system-monitor rockchip-system-monitor: system monitor probe
[ 1.232756] Serial: 8250/16550 driver, 5 ports, IRQ sharing disabled
[ 1.234002] ff180000.serial: ttyS0 at MMIO 0xff180000 (irq = 37, base_baud = 1500000) is a 16550A
[ 1.235368] ff370000.serial: ttyS4 at MMIO 0xff370000 (irq = 39, base_baud = 1500000) is a 16550A
[ 1.237256] [drm] Initialized drm 1.1.0 20060810
[ 1.241133] [drm] Rockchip DRM driver version: v1.0.1
[ 1.241943] rockchip-drm display-subsystem: dmc is disabled
[ 1.242771] rockchip-vop ff900000.vop: missing rockchip,grf property
[ 1.243614] rockchip-drm display-subsystem: bound ff900000.vop (ops 0xffffff8008d56340)
[ 1.244397] rockchip-vop ff8f0000.vop: missing rockchip,grf property
[ 1.245164] rockchip-drm display-subsystem: bound ff8f0000.vop (ops 0xffffff8008d56340)
[ 1.246153] i2c i2c-9: of_i2c: modalias failure on /hdmi@ff940000/ports
[ 1.246807] dwhdmi-rockchip ff940000.hdmi: registered DesignWare HDMI I2C bus driver
[ 1.247619] dwhdmi-rockchip ff940000.hdmi: Detected HDMI TX controller v2.11a with HDCP (DWC HDMI 2.0 TX PHY)
[ 1.249332] rockchip-drm display-subsystem: bound ff940000.hdmi (ops 0xffffff8008d4b4c8)
[ 1.250115] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 1.250726] [drm] No driver support for vblank timestamp query.
[ 1.251510] rockchip-drm display-subsystem: failed to parse loader memory
[ 1.252156] rockchip-drm display-subsystem: No connectors reported connected with modes
[ 1.252922] [drm] Cannot find any crtc or sizes - going 1024x768
[11:57:59.683]收←◆[ 1.265467] Console: switching to colour frame buffer device 128x48
[ 1.273129] rockchip-drm display-subsystem: fb0: frame buffer device
[ 1.282193] mali ff9a0000.gpu: Failed to get regulator
[ 1.282754] mali ff9a0000.gpu: Power control initialization failed
[ 1.283828] Unable to detect cache hierarchy for CPU 0
[ 1.285121] brd: module loaded
[ 1.290748] loop: module loaded
[ 1.291630] zram: Added device: zram0
[ 1.292369] lkdtm: No crash points registered, enable through debugfs
[ 1.295289] rk_gmac-dwmac fe300000.ethernet: clock input or output? (input).
[ 1.296041] rk_gmac-dwmac fe300000.ethernet: TX delay(0x28).
[ 1.296629] rk_gmac-dwmac fe300000.ethernet: RX delay(0x20).
[ 1.297241] rk_gmac-dwmac fe300000.ethernet: integrated PHY? (no).
[ 1.298066] rk_gmac-dwmac fe300000.ethernet: cannot get clock clk_mac_speed
[ 1.298796] rk_gmac-dwmac fe300000.ethernet: clock input from PHY
[ 1.304430] rk_gmac-dwmac fe300000.ethernet: init for RGMII
[ 1.305129] stmmac - user ID: 0x10, Synopsys ID: 0x35
[ 1.305659] Ring mode enabled
[ 1.305978] DMA HW capability register supported
[ 1.306443] Normal descriptors
[ 1.306811] RX Checksum Offload Engine supported (type 2)
[ 1.307379] TX Checksum insertion supported
[ 1.307824] Wake-Up On Lan supported
[ 1.308244] Enable RX Mitigation via HW Watchdog Timer
[11:57:59.929]收←◆[ 1.383390] libphy: stmmac: probed
[ 1.386680] eth%d: PHY ID 001cc916 at 0 IRQ POLL (stmmac-0:00) active
[ 1.390252] eth%d: PHY ID 001cc916 at 1 IRQ POLL (stmmac-0:01)
[ 1.395083] PPP generic driver version 2.4.2
[ 1.398690] PPP BSD Compression module registered
[ 1.402068] PPP Deflate Compression module registered
[ 1.405456] PPP MPPE Compression module registered
[ 1.408768] NET: Registered protocol family 24
[ 1.412120] usbcore: registered new interface driver rndis_wlan
[ 1.415713] Rockchip WiFi SYS interface (V1.00) ...
[ 1.419079] usbcore: registered new interface driver rtl8150
[ 1.422437] usbcore: registered new interface driver r8152
[ 1.425727] usbcore: registered new interface driver asix
[ 1.428917] usbcore: registered new interface driver ax88179_178a
[ 1.432124] usbcore: registered new interface driver cdc_ether
[ 1.435219] usbcore: registered new interface driver rndis_host
[ 1.438279] usbcore: registered new interface driver cdc_ncm
[ 1.441214] usbcore: registered new interface driver cdc_mbim
[ 1.444074] GobiNet: GobiNet-fastdial-v3.2
[ 1.446779] usbcore: registered new interface driver GobiNet-LS
[ 1.451121] rockchip-dwc3 usb0: failed to get drvdata dwc3
[ 1.455126] rockchip-dwc3 usb1: failed to get drvdata dwc3
[ 1.458973] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.461845] ehci-pci: EHCI PCI platform driver
[ 1.464548] ehci-platform: EHCI generic platform driver
[ 1.467941] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.470731] ohci-platform: OHCI generic platform driver
[ 1.474381] usbcore: registered new interface driver cdc_wdm
[ 1.477155] usbcore: registered new interface driver uas
[ 1.479858] usbcore: registered new interface driver usb-storage
[ 1.482661] usbcore: registered new interface driver usbserial
[ 1.485365] usbcore: registered new interface driver usbserial_generic
[ 1.488079] usbserial: USB Serial support registered for generic
[ 1.490739] usbcore: registered new interface driver cp210x
[ 1.493367] usbserial: USB Serial support registered for cp210x
[ 1.496092] usbcore: registered new interface driver ftdi_sio
[ 1.498819] usbserial: USB Serial support registered for FTDI USB Serial Device
[ 1.501747] usbcore: registered new interface driver keyspan
[ 1.504538] usbserial: USB Serial support registered for Keyspan - (without firmware)
[ 1.507591] usbserial: USB Serial support registered for Keyspan 1 port adapter
[ 1.510567] usbserial: USB Serial support registered for Keyspan 2 port adapter
[ 1.513503] usbserial: USB Serial support registered for Keyspan 4 port adapter
[ 1.516411] usbcore: registered new interface driver option
[ 1.519165] usbserial: USB Serial support registered for GSM modem (1-port)
[ 1.522097] usbcore: registered new interface driver oti6858
[ 1.524905] usbserial: USB Serial support registered for oti6858
[ 1.527771] usbcore: registered new interface driver pl2303
[ 1.530595] usbserial: USB Serial support registered for pl2303
[ 1.533481] usbcore: registered new interface driver qcserial
[ 1.536332] usbserial: USB Serial support registered for Qualcomm USB modem
[ 1.539360] usbcore: registered new interface driver sierra
[ 1.542246] usbserial: USB Serial support registered for Sierra USB modem
[ 1.545298] usbcore: registered new interface driver cdc_xr_usb_serial
[ 1.548298] xr_usb_serial_common: Exar USB UART (serial port) driver
[ 1.552528] usbcore: registered new interface driver usbtouchscreen
[ 1.555819] sensor_register_slave:mma8452,id=17
[ 1.558669] sensor_register_slave:lis3dh,id=7
[ 1.561459] sensor_register_slave:mma7660,id=18
[ 1.564224] sensor_register_slave:lsm303d,id=22
[ 1.566990] sensor_register_slave:mpu6880_acc,id=24
[ 1.569811] sensor_register_slave:
[11:58:00.149]收←◆mpu6500_acc,id=25
[ 1.572623] sensor_register_slave:lsm330_acc,id=26
[ 1.575430] sensor_register_slave:akm8975,id=30
[ 1.578214] sensor_register_slave:akm8963,id=31
[ 1.580993] sensor_register_slave:l3g4200d,id=45
[ 1.583794] sensor_register_slave:l3g20d,id=46
[ 1.586546] sensor_register_slave:ewtsa,id=47
[ 1.589244] sensor_register_slave:lsm330_gyro,id=51
[ 1.591961] sensor_register_slave:cm3217,id=53
[ 1.594658] sensor_register_slave:cm3218,id=54
[ 1.597805] i2c /dev entries driver
[ 1.601712] rk808 0-0020: Pmic Chip id: 0x8090
[ 1.604698] rk808 0-0020: source: on=0x40, off=0x00
[ 1.608142] rk808 0-0020: support dcdc3 fb mode:-22, -564529152
[ 1.611130] rk808 0-0020: support pmic reset mode:0,0
[ 1.616196] rk808-regulator rk808-regulator: there is no dvs0 gpio
[ 1.619049] rk808-regulator rk808-regulator: there is no dvs1 gpio
[ 1.621921] DCDC_REG1: supplied by vcc5v0_sys
[ 1.626074] DCDC_REG2: supplied by vcc5v0_sys
[ 1.630278] DCDC_REG3: supplied by vcc5v0_sys
[ 1.634205] DCDC_REG4: supplied by vcc5v0_sys
[ 1.638041] DCDC_REG5: supplied by vcc5v0_sys
[ 1.641647] LDO_REG1: supplied by vcc_buck5
[ 1.645871] LDO_REG2: supplied by vcc_buck5
[ 1.650027] LDO_REG3: supplied by vcc_buck5
[ 1.654134] LDO_REG4: supplied by vcc_buck5
[ 1.658181] LDO_REG5: supplied by vcc_buck5
[ 1.662194] LDO_REG6: supplied by vcc_buck5
[ 1.666200] LDO_REG7: supplied by vcc3v3_sys
[ 1.670219] LDO_REG8: supplied by vcc3v3_sys
[ 1.674186] LDO_REG9: supplied by vcc3v3_sys
[ 1.678129] SWITCH_REG1: supplied by vcc5v0_sys
[ 1.680650] SWITCH_REG2: supplied by vcc3v3_sys
[ 1.683883] rk817-battery rk817-battery: Failed to find matching dt id
[ 1.686303] rk817-charger rk817-charger: Failed to find matching dt id
[ 1.690708] input: rk8xx_pwrkey as /devices/platform/ff3c0000.i2c/i2c-0/0-0020/input/input0
[ 1.696778] rk808-rtc rk808-rtc: rtc core: registered rk808-rtc as rtc0
[ 1.701038] fan53555-regulator 0-001c: FAN53555 Option[12] Rev[15] Detected!
[ 1.703441] fan53555-reg: supplied by vcc5v0_sys
[ 1.707807] fan53555-regulator 0-0010: FAN53555 Option[0] Rev[15] Detected!
[ 1.710194] fan53555-reg: supplied by vcc5v0_sys
[ 1.713941] rk3x-i2c ff3c0000.i2c: Initialized RK3xxx I2C bus at ffffff80096da000
[ 1.717077] rk3x-i2c ff110000.i2c: Initialized RK3xxx I2C bus at ffffff80096dc000
[ 1.719947] rk3x-i2c ff150000.i2c: Initialized RK3xxx I2C bus at ffffff80096de000
[ 1.722798] rk3x-i2c ff160000.i2c: Initialized RK3xxx I2C bus at ffffff80096f2000
[ 1.732817] rtc-hym8563 4-0051: rtc core: registered hym8563 as rtc1
[ 1.736046] rk3x-i2c ff3d0000.i2c: Initialized RK3xxx I2C bus at ffffff80096f4000
[ 1.739620] fusb302 8-0022: Can't get property of role, set role to default DRP
[ 1.745455] fusb302 8-0022: port 0 probe success with role ROLE_MODE_DRP, try_role ROLE_MODE_NONE
[ 1.748306] input: Typec_Headphone as /devices/platform/ff3e0000.i2c/i2c-8/8-0022/input/input1
[ 1.751199] rk3x-i2c ff3e0000.i2c: Initialized RK3xxx I2C bus at ffffff80096f6000
[ 1.754785] ov9750 1-0010: probing cam_num:0 0x10
[ 1.757292] ov9750 1-0010: probing successful
[ 1.759825] rockchip-pinctrl pinctrl: pin gpio2-11 already requested by 1-0010; cannot claim for 1-0036
[ 1.762869] rockchip-pinctrl pinctrl: pin-75 (1-0036) status -22
[ 1.765627] rockchip-pinctrl pinctrl: could not request pin 75 (gpio2-11) from group cam-default-pins on device rockchip-pinctrl
[ 1.771338] ov9750 1-0036: Error applying setting, reverse things back
[ 1.774401] ov9750 1-0036: probing cam_num:1 0x36
[ 1.777275] ov9750 1-0036: probing successful
[ 1.780823] IR NEC protocol handler initialized
[ 1.784111] usbcore: registered new interface driver uvcvideo
[ 1.787088] USB Video Class driver (1.1.1)
[ 1.789894] Driver for 1-wire Dallas network protocol.
[ 1.796231] Boot mode: coldboot
[11:58:00.444]收←◆[ 2.019841] ina2xx 6-0047: error configuring the device: -6
[ 2.027147] rk_tsadcv2_temp_to_code: Invalid conversion table: code=1023, temperature=2147483647
[ 2.033576] rockchip-thermal ff260000.tsadc: tsadc is probed successfully!
[ 2.040890] dw_wdt ff848000.watchdog: Should better to setup a 'resets' property in dt, that must been named with reset
[ 2.047994] Bluetooth: Virtual HCI driver ver 1.5
[ 2.051439] Bluetooth: HCI UART driver ver 2.3
[ 2.054768] Bluetooth: HCI UART protocol H4 registered
[ 2.058209] Bluetooth: HCI UART protocol LL registered
[ 2.058281] usbcore: registered new interface driver bfusb
[ 2.058293] rtk_btcoex: Coex over UDP
[ 2.058667] usbcore: registered new interface driver rtk_btusb
[ 2.059198] cpu cpu0: leakage=22
[11:58:00.471]收←◆[ 2.088147] cpu cpu0: temp=36875, pvtm=143923 (144498 + -575)
[ 2.092841] cpu cpu0: pvtm-volt-sel=1
[ 2.096751] cpu cpu4: leakage=41
[11:58:00.583]收←◆[ 2.112988] cpu cpu4: temp=36250, pvtm=157711 (158066 + -355)
[ 2.120802] cpu cpu4: pvtm-volt-sel=2
[ 2.125857] cpu cpu0: avs=0
[ 2.129357] cpu cpu0: l=0 h=2147483647 hyst=5000 l_limit=0 h_limit=0
[ 2.134521] cpu cpu0: failed to find power_model node
[ 2.139095] cpu cpu4: avs=0
[ 2.142497] cpu cpu4: l=0 h=2147483647 hyst=5000 l_limit=0 h_limit=0
[ 2.147458] cpu cpu4: failed to find power_model node
[ 2.151840] sdhci: Secure Digital Host Controller Interface driver
[ 2.155442] sdhci: Copyright(c) Pierre Ossman
[ 2.158904] Synopsys Designware Multimedia Card Interface Driver
[ 2.163472] dwmmc_rockchip fe310000.dwmmc: IDMAC supports 32-bit address mode.
[ 2.167791] dwmmc_rockchip fe310000.dwmmc: Using internal DMA controller.
[ 2.171059] dwmmc_rockchip fe310000.dwmmc: Version ID is 270a
[ 2.174143] dwmmc_rockchip fe310000.dwmmc: DW MMC controller at irq 25,32 bit host data width,256 deep fifo
[ 2.177600] dwmmc_rockchip fe310000.dwmmc: 'clock-freq-min-max' property was deprecated.
[ 2.180933] dwmmc_rockchip fe310000.dwmmc: No vmmc regulator found
[ 2.183978] dwmmc_rockchip fe310000.dwmmc: No vqmmc regulator found
[ 2.187810] dwmmc_rockchip fe320000.dwmmc: IDMAC supports 32-bit address mode.
[ 2.190918] dwmmc_rockchip fe320000.dwmmc: Using internal DMA controller.
[ 2.193969] dwmmc_rockchip fe320000.dwmmc: Version ID is 270a
[ 2.196891] dwmmc_rockchip fe320000.dwmmc: DW MMC controller at irq 26,32 bit host data width,256 deep fifo
[ 2.200175] dwmmc_rockchip fe320000.dwmmc: 'clock-freq-min-max' property was deprecated.
[ 2.203670] dwmmc_rockchip fe320000.dwmmc: No vmmc regulator found
[ 2.209049] vccio_sd: voltage operation not allowed
[11:58:00.627]收←◆[ 2.224534] mmc_host mmc0: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
[ 2.240132] dwmmc_rockchip fe320000.dwmmc: 1 slots initialized
[ 2.242977] sdhci-pltfm: SDHCI platform and OF driver helper
[ 2.247253] sdhci-arasan fe330000.sdhci: No vmmc regulator found
[ 2.251836] sdhci-arasan fe330000.sdhci: No vqmmc regulator found
[11:58:00.847]收←◆[ 2.287202] mmc1: SDHCI controller on fe330000.sdhci [fe330000.sdhci] using ADMA
[ 2.295271] rockchip-pinctrl pinctrl: unable to find group for node leds-gpio
[ 2.302846] hidraw: raw HID events driver (C) Jiri Kosina
[ 2.310219] usbcore: registered new interface driver usbhid
[ 2.314794] usbhid: USB HID core driver
[ 2.329200] usbcore: registered new interface driver snd-usb-audio
[ 2.343170] Netfilter messages via NETLINK v0.30.
[ 2.347446] nfnl_acct: registering with nfnetlink.
[ 2.351778] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 2.356727] ctnetlink v0.93: registering with nfnetlink.
[ 2.360342] nf_tables: (c) 2007-2009 Patrick McHardy <kaber@trash.net>
[ 2.360430] mmc1: new HS400 Enhanced strobe MMC card at address 0001
[ 2.361944] mmcblk1: mmc1:0001 BJTD4R 29.1 GiB
[ 2.362713] mmcblk1boot0: mmc1:0001 BJTD4R partition 1 4.00 MiB
[ 2.363626] mmcblk1boot1: mmc1:0001 BJTD4R partition 2 4.00 MiB
[ 2.364398] mmcblk1rpmb: mmc1:0001 BJTD4R partition 3 4.00 MiB
[ 2.372584] mmcblk1: p1 p2 p3 p4
[ 2.383500] nf_tables_compat: (c) 2012 Pablo Neira Ayuso <pablo@netfilter.org>
[ 2.387012] xt_time: kernel timezone is -0000
[ 2.390119] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 2.393201] ipt_CLUSTERIP: ClusterIP Version 0.8 loaded successfully
[ 2.396284] arp_tables: (C) 2002 David S. Miller
[ 2.399224] Initializing XFRM netlink socket
[ 2.402428] NET: Registered protocol family 10
[ 2.405885] NET: Registered protocol family 17
[ 2.408334] NET: Registered protocol family 15
[ 2.410747] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
[ 2.416264] Bluetooth: RFCOMM socket layer initialized
[ 2.418824] Bluetooth: RFCOMM ver 1.11
[ 2.421230] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[ 2.423838] Bluetooth: HIDP socket layer initialized
[ 2.426380] [WLAN_RFKILL]: Enter rfkill_wlan_init
[ 2.429118] [WLAN_RFKILL]: Enter rfkill_wlan_probe
[ 2.431604] [WLAN_RFKILL]: wlan_platdata_parse_dt: wifi_chip_type = ap6255
[ 2.434250] [WLAN_RFKILL]: wlan_platdata_parse_dt: enable wifi power control.
[ 2.436917] [WLAN_RFKILL]: wlan_platdata_parse_dt: wifi power controled by gpio.
[ 2.439678] [WLAN_RFKILL]: wlan_platdata_parse_dt: get property: WIFI,host_wake_irq = 3, flags = 0.
[ 2.442434] [WLAN_RFKILL]: wlan_platdata_parse_dt: The ref_wifi_clk not found !
[ 2.444804] [WLAN_RFKILL]: rfkill_wlan_probe: init gpio
[ 2.446968] [WLAN_RFKILL]: Exit rfkill_wlan_probe
[ 2.449134] [BT_RFKILL]: Enter rfkill_rk_init
[ 2.451489] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: uart_rts_gpios = 83.
[ 2.453921] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,reset_gpio = 92.
[ 2.456280] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,wake_gpio = 90.
[ 2.458606] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,wake_host_irq = 5.
[ 2.461694] [BT_RFKILL]: Request irq for bt wakeup host
[ 2.463837] [BT_RFKILL]: ** disable irq
[ 2.465669] [BT_RFKILL]: bt_default device registered.
[ 2.467578] Key type dns_resolver registered
[ 2.469892] sensor_register_slave:mpu6880_gyro,id=50
[ 2.471749] Error: Driver 'ov4689' is already registered, aborting...
[ 2.472630] vendor storage:20190527 ret = 0
[ 2.475426] Error: Driver 'ov9750' is already registered, aborting...
[ 2.477366] Error: Driver 'ov13850' is already registered, aborting...
[ 2.479323] Error: Driver 'imx258' is already registered, aborting...
[ 2.481346] Error: Driver 'sc031gs' is already registered, aborting...
[ 2.483968] cif_isp10_v4l2_drv_probe: CIF ISP10 driver version: v0.2.3
[ 2.485852] cif_isp10_pltfrm_dev_init(886) ERR: could not get default pinstate
[ 2.487711] cif_isp10_pltfrm_dev_init WARN: could not get pins_sleep pinstate
[ 2.489546] cif_isp10_pltfrm_dev_init WARN: could not get pins_inactive pinstate
[ 2.491999] ov9750.pltfrm_camera_module_get_data WARN: could not get default pinstate
[ 2.493950] ov9750.pltfrm_camera_module_get_data WARN: could not get sleep pinstate
[11:58:00.928]收←◆[ 2.531302] ov9750.ov_camera_module_write_config(180) ERR: no active sensor configuration
[ 2.532061] ov9750.ov_camera_module_write_config(231) ERR: failed with error -14
[ 2.535474] ov9750.pltfrm_camera_module_read_reg(1040) ERR: i2c read from offset 0x0000300b failed with error -6
[ 2.537946] ov9750.pltfrm_camera_module_read_reg(1040) ERR: i2c read from offset 0x0000300c failed with error -6
[ 2.540090] ov9750.ov9750_check_camera_id(912) ERR: register read failed, camera module powered off?
[ 2.542140] ov9750.ov9750_check_camera_id(930) ERR: failed with error (-6)
[ 2.543975] ov9750.ov_camera_module_attach(254) ERR: failed with error -6
[ 2.545814] cif_isp10_img_src_v4l2_i2c_subdev_to_img_src(59) ERR: failed with error -6
[ 2.547764] cif_isp10_img_src_to_img_src(70) ERR: to_img_src failed!
[ 2.549614] cif_isp10_img_src_to_img_src(78) ERR: failed with error -14
[ 2.551601] ov9750.pltfrm_camera_module_get_data WARN: could not get default pinstate
[ 2.553570] ov9750.pltfrm_camera_module_get_data WARN: could not get sleep pinstate
[11:58:01.013]收←◆[ 2.590890] ov9750.ov_camera_module_write_config(180) ERR: no active sensor configuration
[ 2.591648] ov9750.ov_camera_module_write_config(231) ERR: failed with error -14
[ 2.595050] ov9750.pltfrm_camera_module_read_reg(1040) ERR: i2c read from offset 0x0000300b failed with error -6
[ 2.597498] ov9750.pltfrm_camera_module_read_reg(1040) ERR: i2c read from offset 0x0000300c failed with error -6
[ 2.599663] ov9750.ov9750_check_camera_id(912) ERR: register read failed, camera module powered off?
[ 2.601747] ov9750.ov9750_check_camera_id(930) ERR: failed with error (-6)
[ 2.603639] ov9750.ov_camera_module_attach(254) ERR: failed with error -6
[ 2.605537] cif_isp10_img_src_v4l2_i2c_subdev_to_img_src(59) ERR: failed with error -6
[ 2.607549] cif_isp10_img_src_to_img_src(70) ERR: to_img_src failed!
[ 2.609447] cif_isp10_img_src_to_img_src(78) ERR: failed with error -14
[ 2.611363] cif_isp10_img_srcs_init(1105) ERR: failed with error -14
[ 2.613250] cif_isp10_create(6101) ERR: cif_isp10_img_srcs_init failed
[ 2.615144] cif_isp10_create(6139) ERR: failed with error -14
[ 2.617425] Registered cp15_barrier emulation handler
[ 2.619385] Registered setend emulation handler
[ 2.622328] Loading compiled-in X.509 certificates
[ 2.625017] rga2: Driver loaded successfully ver:3.02
[ 2.627027] rga2: Module initialized.
[ 2.630103] phy phy-ff770000.syscon:usb2-phy@e450.5: Failed to get VBUS supply regulator
[ 2.634253] phy phy-ff770000.syscon:usb2-phy@e460.7: Failed to get VBUS supply regulator
[ 2.637195] mali ff9a0000.gpu: leakage=28
[11:58:01.057]收←◆[ 2.666907] mali ff9a0000.gpu: temp=34444, pvtm=125938 (126260 + -322)
[ 2.682454] mali ff9a0000.gpu: pvtm-volt-sel=2
[ 2.695984] mali ff9a0000.gpu: avs=0
[11:58:01.275]收←◆[ 2.706119] mali ff9a0000.gpu: GPU identified as 0x0860 r2p0 status 0
[ 2.715233] mali ff9a0000.gpu: Protected mode not available
[ 2.722524] mali ff9a0000.gpu: l=0 h=2147483647 hyst=5000 l_limit=0 h_limit=0
[ 2.729118] mali ff9a0000.gpu: Using configured power model mali-simple-power-model, and fallback mali-simple-power-model
[ 2.736348] I : [File] : drivers/gpu/arm/midgard/backend/gpu/mali_kbase_devfreq.c; [Line] : 423; [Func] : kbase_devfreq_init(); success initing power_model_simple.
[ 2.751527] mali ff9a0000.gpu: Probed as mali0
[ 2.763269] xhci-hcd xhci-hcd.8.auto: xHCI Host Controller
[ 2.770264] xhci-hcd xhci-hcd.8.auto: new USB bus registered, assigned bus number 1
[ 2.777624] xhci-hcd xhci-hcd.8.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x06030010
[ 2.784752] xhci-hcd xhci-hcd.8.auto: irq 232, io mem 0xfe800000
[ 2.788647] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.792380] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.796169] usb usb1: Product: xHCI Host Controller
[ 2.799681] usb usb1: Manufacturer: Linux 4.4.189 xhci-hcd
[ 2.803295] usb usb1: SerialNumber: xhci-hcd.8.auto
[ 2.807305] hub 1-0:1.0: USB hub found
[ 2.810422] hub 1-0:1.0: 1 port detected
[ 2.813522] xhci-hcd xhci-hcd.8.auto: xHCI Host Controller
[ 2.816570] xhci-hcd xhci-hcd.8.auto: new USB bus registered, assigned bus number 2
[ 2.819735] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[ 2.823020] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[ 2.826077] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.829210] usb usb2: Product: xHCI Host Controller
[ 2.831917] usb usb2: Manufacturer: Linux 4.4.189 xhci-hcd
[ 2.834470] usb usb2: SerialNumber: xhci-hcd.8.auto
[ 2.837237] hub 2-0:1.0: USB hub found
[ 2.839659] hub 2-0:1.0: 1 port detected
[ 2.843217] xhci-hcd xhci-hcd.8.auto: remove, state 1
[ 2.845722] usb usb2: USB disconnect, device number 1
[ 2.847389] xhci-hcd xhci-hcd.9.auto: xHCI Host Controller
[ 2.851291] xhci-hcd xhci-hcd.9.auto: new USB bus registered, assigned bus number 3
[ 2.854175] xhci-hcd xhci-hcd.9.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x06230010
[ 2.857083] xhci-hcd xhci-hcd.9.auto: irq 233, io mem 0xfe900000
[ 2.859778] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.862392] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.865047] usb usb3: Product: xHCI Host Controller
[ 2.867165] xhci-hcd xhci-hcd.8.auto: Host not halted after 16000 microseconds.
[ 2.867171] xhci-hcd xhci-hcd.8.auto: Host controller not halted, aborting reset.
[ 2.867233] xhci-hcd xhci-hcd.8.auto: USB bus 2 deregistered
[ 2.875254] usb usb3: Manufacturer: Linux 4.4.189 xhci-hcd
[ 2.877474] usb usb3: SerialNumber: xhci-hcd.9.auto
[ 2.879998] hub 3-0:1.0: USB hub found
[ 2.882075] hub 3-0:1.0: 1 port detected
[ 2.884309] xhci-hcd xhci-hcd.9.auto: xHCI Host Controller
[ 2.886720] xhci-hcd xhci-hcd.9.auto: new USB bus registered, assigned bus number 4
[ 2.886743] xhci-hcd xhci-hcd.8.auto: remove, state 1
[ 2.886780] usb usb1: USB disconnect, device number 1
[ 2.893835] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[ 2.894244] xhci-hcd xhci-hcd.8.auto: USB bus 1 deregistered
[ 2.898233] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[ 2.900386] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.902525] usb usb4: Product: xHCI Host Controller
[ 2.904403] usb usb4: Manufacturer: Linux 4.4.189 xhci-hcd
[ 2.906336] usb usb4: SerialNumber: xhci-hcd.9.auto
[ 2.908462] hub 4-0:1.0: USB hub found
[ 2.910254] hub 4-0:1.0: 1 port detected
[ 2.915164] ehci-platform fe380000.usb: EHCI
[11:58:01.355]收←◆ Host Controller
[ 2.917211] ehci-platform fe380000.usb: new USB bus registered, assigned bus number 1
[ 2.919566] ehci-platform fe380000.usb: irq 28, io mem 0xfe380000
[ 2.926795] ehci-platform fe380000.usb: USB 2.0 started, EHCI 1.00
[ 2.928932] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.930950] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.933008] usb usb1: Product: EHCI Host Controller
[ 2.934845] usb usb1: Manufacturer: Linux 4.4.189 ehci_hcd
[ 2.936754] usb usb1: SerialNumber: fe380000.usb
[ 2.938966] hub 1-0:1.0: USB hub found
[ 2.940738] hub 1-0:1.0: 1 port detected
[ 2.944665] ehci-platform fe3c0000.usb: EHCI Host Controller
[ 2.946667] ehci-platform fe3c0000.usb: new USB bus registered, assigned bus number 2
[ 2.948881] ehci-platform fe3c0000.usb: irq 30, io mem 0xfe3c0000
[ 2.956865] ehci-platform fe3c0000.usb: USB 2.0 started, EHCI 1.00
[ 2.959148] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.961328] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.963539] usb usb2: Product: EHCI Host Controller
[ 2.965547] usb usb2: Manufacturer: Linux 4.4.189 ehci_hcd
[ 2.967615] usb usb2: SerialNumber: fe3c0000.usb
[ 2.969967] hub 2-0:1.0: USB hub found
[ 2.971900] hub 2-0:1.0: 1 port detected
[ 2.974366] ohci-platform fe3a0000.usb: Generic Platform OHCI controller
[ 2.976671] ohci-platform fe3a0000.usb: new USB bus registered, assigned bus number 5
[ 2.979067] ohci-platform fe3a0000.usb: irq 29, io mem 0xfe3a0000
[11:58:01.450]收←◆[ 3.036260] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.042356] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.048400] usb usb5: Product: Generic Platform OHCI controller
[ 3.054277] usb usb5: Manufacturer: Linux 4.4.189 ohci_hcd
[ 3.057428] usb usb5: SerialNumber: fe3a0000.usb
[ 3.061043] hub 5-0:1.0: USB hub found
[ 3.064060] hub 5-0:1.0: 1 port detected
[ 3.067884] ohci-platform fe3e0000.usb: Generic Platform OHCI controller
[ 3.071320] ohci-platform fe3e0000.usb: new USB bus registered, assigned bus number 6
[ 3.075067] ohci-platform fe3e0000.usb: irq 31, io mem 0xfe3e0000
[11:58:01.556]收←◆[ 3.133887] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.135092] phy phy-ff770000.syscon:usb2-phy@e450.5: charger = USB_SDP_CHARGER
[ 3.157211] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.169052] usb usb6: Product: Generic Platform OHCI controller
[ 3.180688] usb usb6: Manufacturer: Linux 4.4.189 ohci_hcd
[ 3.192092] usb usb6: SerialNumber: fe3e0000.usb
[ 3.205574] hub 6-0:1.0: USB hub found
[11:58:01.634]收←◆[ 3.216891] hub 6-0:1.0: 1 port detected
[ 3.223234] dwmmc_rockchip fe310000.dwmmc: IDMAC supports 32-bit address mode.
[ 3.228457] dwmmc_rockchip fe310000.dwmmc: Using internal DMA controller.
[ 3.233441] dwmmc_rockchip fe310000.dwmmc: Version ID is 270a
[ 3.238333] dwmmc_rockchip fe310000.dwmmc: DW MMC controller at irq 25,32 bit host data width,256 deep fifo
[ 3.243816] dwmmc_rockchip fe310000.dwmmc: 'clock-freq-min-max' property was deprecated.
[ 3.249216] dwmmc_rockchip fe310000.dwmmc: No vmmc regulator found
[ 3.254225] dwmmc_rockchip fe310000.dwmmc: No vqmmc regulator found
[ 3.259723] dwmmc_rockchip fe310000.dwmmc: allocated mmc-pwrseq
[11:58:01.748]收←◆[ 3.276962] usb 2-1: new high-speed USB device number 2 using ehci-platform
[ 3.277785] mmc_host mmc2: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
[ 3.290818] dwmmc_rockchip fe310000.dwmmc: 1 slots initialized
[ 3.305383] asoc-simple-card rk809-sound: rk817-hifi <-> ff890000.i2s mapping ok
[ 3.311799] asoc-simple-card rk809-sound: ASoC: no source widget found for MICBIAS1
[ 3.318216] asoc-simple-card rk809-sound: ASoC: Failed to add route MICBIAS1 -> direct -> Mic Jack
[ 3.319321] mmc_host mmc2: Bus speed (slot 0) = 300000Hz (slot req 300000Hz, actual 300000HZ div = 0)
[ 3.331541] asoc-simple-card rk809-sound: ASoC: no sink widget found for IN1P
[ 3.338172] asoc-simple-card rk809-sound: ASoC: Failed to add route Mic Jack -> direct -> IN1P
[ 3.341946] asoc-simple-card rk809-sound: ASoC: no source widget found for HPOL
[ 3.345580] asoc-simple-card rk809-sound: ASoC: Failed to add route HPOL -> direct -> Headphone Jack
[ 3.349435] asoc-simple-card rk809-sound: ASoC: no source widget found for HPOR
[ 3.353100] asoc-simple-card rk809-sound: ASoC: Failed to add route HPOR -> direct -> Headphone Jack
[ 3.360318] mmc_host mmc2: Bus speed (slot 0) = 200000Hz (slot req 200000Hz, actual 200000HZ div = 0)
[ 3.360523] asoc-simple-card hdmi-sound: i2s-hifi <-> ff8a0000.i2s mapping ok
[ 3.364138] *** no ext gpio defined
[ 3.364141] *** no ext key defined
[ 3.364244] *** Have No Ext Gpios.
[ 3.364246] *** Have No Ext Key.
[11:58:01.890]收←◆[ 3.364964] dhd_module_init: in Dongle Host Driver, version 1.579.77.41.10 (r)
[ 3.364970] ======== dhd_wlan_init_plat_data ========
[ 3.364973] [WLAN_RFKILL]: rockchip_wifi_get_oob_irq: Enter
[ 3.364980] dhd_wlan_init_gpio: WL_HOST_WAKE=-1, oob_irq=71, oob_irq_flags=0x414
[ 3.364982] dhd_wlan_init_gpio: WL_REG_ON=-1
[ 3.364985] dhd_wifi_platform_load: Enter
[ 3.365003] Power-up adapter 'DHD generic adapter'
[ 3.365040] wifi_platform_set_power = 1
[ 3.365043] ======== PULL WL_REG_ON(-1) HIGH! ========
[ 3.365047] [WLAN_RFKILL]: rockchip_wifi_power: 1
[11:58:02.019]收←◆[ 3.365050] [WLAN_RFKILL]: wifi turn on power. -1
[ 3.373689] rk808-rtc rk808-rtc: setting system clock to 2017-08-05 09:00:06 UTC (1501923606)
[ 3.391556] rockchip_headset_probe() headset have hook adc mode
[ 3.391833] input: rk_headset as /devices/platform/rk_headset/input/input2
[ 3.478921] usb 2-1: New USB device found, idVendor=1a40, idProduct=0201
[ 3.478929] usb 2-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 3.478934] usb 2-1: Product: USB 2.0 Hub [MTT]
[ 3.479694] hub 2-1:1.0: USB hub found
[ 3.479910] hub 2-1:1.0: 7 ports detected
[ 3.682862] wifi_platform_bus_enumerate device present 1
[ 3.695827] ======== Card detection to detect SDIO card! ========
[ 3.708808] mmc2:mmc host rescan start!
[11:58:02.158]收←◆[ 3.724731] I : [File] : drivers/gpu/arm/mali400/mali/linux/mali_kernel_linux.c; [Line] : 417; [Func] : mali_module_init(); svn_rev_string_from_arm of this mali_ko is '', rk_ko_ver is '5', built at '14:38:23', on 'May 8 2020'.
[ 3.737770] Mali: Mali device driver loaded
[ 3.744217] input: rk29-keypad as /devices/platform/rockchip-key/input/input3
[ 3.753056] es7243_i2c_probe
[ 3.758713] es7243_probe
[ 3.763547] es7243_init_mode
[ 3.768332] ALSA device list:
[ 3.772973] #0: rockchip,rk809-codec
[ 3.777596] #1: rockchip,hdmi
[ 3.782900] Freeing unused kernel memory: 1152K
[11:58:02.233]收←◆[ 3.808729] systemd[1]: System time before build time, advancing clock.
[ 3.814103] systemd[1]: Failed to insert module 'autofs4': No such file or directory
[ 3.819872] cgroup: cgroup2: unknown option "nsdelegate"
[ 3.826457] systemd[1]: systemd 238 running in system mode. (+PAM +AUDIT +SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
[ 3.842329] systemd[1]: Detected architecture arm64.
[ 3.849327] systemd[1]: Running in initial RAM disk.
Welcome to [0;34mToybrick release 2.0 (Initramfs)[0m!
[ 3.857997] systemd[1]: Set hostname to <localhost.localdomain>.
[11:58:02.462]收←◆[ 4.013943] systemd[1]: File /usr/lib/systemd/system/systemd-udevd.service:34 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling.
[ 4.019959] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.)
[ 4.028359] es7243 7-0013: i2c write 0x0 failed
[ 4.042275] random: systemd: uninitialized urandom read (16 bytes read, 36 bits of entropy available)
[ 4.042331] systemd[1]: Reached target Local File Systems.
[ 4.073280] es7243_probe sucess!
[[0;32m OK [0m] Reached target Local File Systems.
[ 4.074028] random: systemd: uninitialized urandom read (16 bytes read, 36 bits of entropy available)
[ 4.075054] systemd[1]: Listening
[11:58:02.512]收←◆ on Journal Socket.
[[0;32m OK [0m] Listening on Journal Socket.
[ 4.119551] random: systemd: uninitialized urandom read (16 bytes read, 37 bits of entropy available)
[ 4.120455] asoc-simple-card es7243-sound: es7243-mic-array <-> ff880000.i2s mapping ok
[ 4.152258] systemd[1]: Listening on udev Kernel Socket.
[11:58:02.687]收←◆[[0;32m OK [0m] Listening on udev Kernel Socket.
[ 4.169143] random: systemd: uninitialized urandom read (16 bytes read, 38 bits of entropy available)
[ 4.176416] systemd[1]: Reached target Slices.
[[0;32m OK [0m] Reached target Slices.
[ 4.183388] random: systemd: uninitialized urandom read (16 bytes read, 38 bits of entropy available)
[ 4.191070] systemd[1]: Reached target Timers.
[[0;32m OK [0m] Reached target Timers.
[ 4.198270] random: systemd: uninitialized urandom read (16 bytes read, 38 bits of entropy available)
[ 4.206386] systemd[1]: Listening on Journal Socket (/dev/log).
[[0;32m OK [0m] Listening on Journal Socket (/dev/log).
[ 4.213990] random: systemd: uninitialized urandom read (16 bytes read, 38 bits of entropy available)
[ 4.223740] systemd[1]: Starting Journal Service...
Starting Journal Service...
[ 4.230548] random: systemd: uninitialized urandom read (16 bytes read, 38 bits of entropy available)
[ 4.243787] systemd[1]: Starting Apply Kernel Variables...
Starting Apply Kernel Variables...
[ 4.250002] random: systemd: uninitialized urandom read (16 bytes read, 38 bits of entropy available)
[ 4.260726] systemd[1]: Starting Setup Virtual Console...
Starting Setup Virtual Console...
[ 4.273125] random: systemd: uninitialized urandom read (16 bytes read, 39 bits of entropy available)
[ 4.287291] systemd[1]: Starting Create Static Device Nodes in /dev...
Starting Create Static Device Nodes in /dev...
[ 4.296662] systemd[1]: Reached target Swap.
[[0;32m OK [0m] Reached target Swap.
[ 4.304113] systemd[1]: Listening on udev Control Socket.
[[0;32m OK [0m] Listening on udev Control Socket.
[ 4.308070] systemd[1]: Reached target Sockets.
[[0;32m OK [0m] Reached target Sockets.
[ 4.312482] systemd[1]: Started Apply Kernel Variables.
[11:58:02.719]收←◆[[0;32m OK [0m] Started Apply Kernel Variables.
[ 4.333525] systemd[1]: Started Create Static Device Nodes in /dev.
[[0;32m OK [0m] Started Create Static Device Nodes in /dev.
[ 4.342421] systemd[1]: Starting udev Kernel Device Manager...
Starting udev Kernel Device Manager...
[11:58:02.750]收←◆[ 4.370239] systemd[1]: Started udev Kernel Device Manager.
[[0;32m OK [0m] Started udev Kernel Device Manager.
[ 4.375716] systemd[1]: Starting udev Coldplug all Devices...
Starting udev Coldplug all Devices...
[11:58:02.799]收←◆[ 4.437138] systemd[1]: Started Setup Virtual Console.
[[0;32m OK [0m] Started Setup Virtual Console.
[11:58:02.907]收←◆[ 4.518463] systemd[1]: Mounting Kernel Configuration File System...
Mounting Kernel Configuration File System...
[ 4.521438] systemd[1]: Started Journal Service.
[[0;32m OK [0m] Started Journal Service.
Starting Create Volatile Files and Directories...
[[0;32m OK [0m] Mounted Kernel Configuration File System.
[[0;32m OK [0m] Started Create Volatile Files and Directories.
[11:58:02.984]收←◆[[0;32m OK [0m] Started udev Coldplug all Devices.
[[0;32m OK [0m] Reached target System Initialization.
Starting Show Plymouth Boot Screen...
[[0;32m OK [0m] Reached target Remote File Systems (Pre).
[[0;32m OK [0m] Reached target Remote File Systems.
[11:58:03.018]收←◆[[0;32m OK [0m] Started Show Plymouth Boot Screen.
[[0;32m OK [0m] Started Forward Password Requests to Plymouth Directory Watch.
[[0;32m OK [0m] Reached target Paths.
[[0;32m OK [0m] Reached target Basic System.
[11:58:03.069]收←◆[[0;32m OK [0m] Found device /dev/disk/by-partuuid/鈥0000-0000-4b53-8000-1d28000054a9.
[[0;32m OK [0m] Reached target Initrd Root Device.
Starting File System Check on /dev/鈥?00-0000-4b53-8000-1d28000054a9...
[11:58:03.151]收←◆[[0;32m OK [0m] Started File System Check on /dev/d鈥0000-0000-4b53-8000-1d28000054a9.
Mounting /sysroot...
[ 4.758284] EXT4-fs (mmcblk1p4): mounted filesystem with ordered data mode. Opts: (null)
[[0;32m OK [0m] Mounted /sysroot.
[[0;32m OK [0m] Reached target Initrd Root File System.
Starting Reload Configuration from the Real Root...
[11:58:03.385]收←◆[[0;32m OK [0m] Started Reload Configuration from the Real Root.
[[0;32m OK [0m] Reached target Initrd File Systems.
Starting Toybrick teec daemon...
[11:58:03.412]收←◆[ 5.031983] EXT4-fs (mmcblk1p3): mounting ext2 file system using the ext4 subsystem
[ 5.036671] EXT4-fs (mmcblk1p3): mounted filesystem without journal. Opts: (null)
[11:58:03.477]收←◆[[0;32m OK [0m] Stopped target Timers.
[[0;32m OK [0m] Stopped target Initrd Root Device.
[[0;32m OK [0m] Stopped target Remote File Systems.
[[0;32m OK [0m] Stopped target Remote File Systems (Pre).
Starting Show Plymouth Reboot Screen...
[[0;32m OK [0m] Stopped Toybrick teec daemon.
[[0;32m OK [0m] Stopped target Basic System.
[[0;32m OK [0m] Stopped target Slices.
[[0;32m OK [0m] Stopped Forward Password Requests to Plymouth Directory Watch.
[[0;32m OK [0m] Stopped target Paths.
[[0;32m OK [0m] Stopped target Sockets.
[[0;32m OK [0m] Stopped target Initrd File Systems.
[11:58:03.511]收←◆
[[0;32m OK [0m] Stopped target Initrd Root File System.
Starting Cleaning Up and Shutting Down Daemons...
Unmounting /sysroot...
[[0;32m OK [0m] Stopped target System Initialization.
[[0;32m OK [0m] Stopped Create Volatile Files and Directories.
[[0;32m OK [0m] Stopped target Local File Systems.
[11:58:03.547]收←◆ Unmounting /boot...
[[0;32m OK [0m] Stopped target Swap.
[[0;32m OK [0m] Stopped Create Static Device Nodes in /dev.
[[0;32m OK [0m] Stopped Apply Kernel Variables.
[[0;32m OK [0m] Reached target Shutdown.
[[0;32m OK [0m] Unmounted /sysroot.
[[0;32m OK [0m] Unmounted /boot.
[11:58:03.589]收←◆[[0;1;31mFAILED[0m] Failed to start Cleaning Up and Shutting Down Daemons.
See 'systemctl status initrd-cleanup.service' for details.
[[0;32m OK [0m] Reached target Unmount All Filesystems.
[[0;32m OK [0m] Reached target Final Step.
[[0;32m OK [0m] Started Show Plymouth Reboot Screen.
Starting Reboot...
[ 5.233153] dw_wdt: unexpected close, system will reboot soon
[11:58:03.758]收←◆[ 5.256108] systemd-shutdown[1]: Syncing filesystems and block devices.
[ 5.261319] systemd-shutdown[1]: Sending SIGTERM to remaining processes...
[ 5.271338] systemd-journald[194]: Received SIGTERM from PID 1 (systemd-shutdow).
[ 5.283270] systemd-shutdown[1]: Sending SIGKILL to remaining processes...
[ 5.296989] systemd-shutdown[1]: Hardware watchdog 'Synopsys DesignWare Watchdog', version 0
[ 5.303617] systemd-shutdown[1]: Unmounting file systems.
[ 5.310539] [322]: Remounting '/' read-only in with options ''.
[ 5.315323] systemd-shutdown[1]: All filesystems unmounted.
[ 5.319210] systemd-shutdown[1]: Deactivating swaps.
[ 5.323103] systemd-shutdown[1]: All swaps deactivated.
[ 5.326873] systemd-shutdown[1]: Detaching loop devices.
[ 5.333397] systemd-shutdown[1]: All loop devices detached.
[ 5.336707] systemd-shutdown[1]: Detaching DM devices.
[ 5.340125] systemd-shutdown[1]: All DM devices detached.
[ 5.345539] systemd-shutdown[1]: Syncing filesystems and block devices.
[ 5.348907] systemd-shutdown[1]: Rebooting.
[ 5.351975] cpu cpu4: min=816000, max=816000
[ 5.355916] cpu cpu0: min=816000, max=816000
[ 5.368066] I : [File] : drivers/gpu/arm/midgard/platform/rk/mali_kbase_config_rk.c; [Line] : 274; [Func] : kbase_platform_rk_shutdown(); to make vdd_gpu enabled for turning off pd_gpu in pm_framework.
[ 5.374570] rk-vcodec ff660000.rkvdec: shutdown
[ 5.377442] rk-vcodec ff650000.vpu_service: shutdown
[ 5.382683] reboot: Restarting system
[11:58:03.822]收←◆DDR Version 1.24 20191016
In
soft reset
SRX |
|
收藏
闽公网安备 35010202001061号