|
|
沙发
楼主 |
发表于 2022-11-29 19:07:33
|
只看该作者
我先排除下问题，我只更新我编译的uboot,是可以启动内核的；这么说，我编译的内核有问题。感觉BSP中的内核有问题。
U-Boot 2017.09 (Nov 28 2022 - 19:30:28 +0800)
Model: Rockchip RK3588 Evaluation Board
PreSerial: 2, raw, 0xfeb50000
DRAM: 7.7 GiB
Sysmem: init
Relocation Offset: edb52000
Relocation fdt: eb9fa168 - eb9fece0
CR: M/C/I
Using default environment
mmc@fe2c0000: 1, mmc@fe2e0000: 0
Bootdev(atags): mmc 0
MMC0: HS200, 200Mhz
PartType: EFI
DM: v2
boot mode: None
FIT: No boot partition
162338 bytes read in 5 ms (31 MiB/s)
DTB(Distro): /extlinux/toybrick.dtb
Pre-reloc: vcc_mipicsi1
I2c0 speed: 100000Hz
vsel-gpios- not found! Error: -2
en-gpios- not found! Error: -2
vdd_cpu_big0_s0 800000 uV
vsel-gpios- not found! Error: -2
en-gpios- not found! Error: -2
vdd_cpu_big1_s0 800000 uV
I2c2 speed: 400000Hz
vsel-gpios- not found! Error: -2
en-gpios- not found! Error: -2
vdd_npu_s0 800000 uV
spi2: RK806: 2
vdd_gpu_s0 750000 uV
vdd_cpu_lit_s0 750000 uV
vdd_log_s0 750000 uV
vdd_vdenc_s0 init 750000 uV
vdd_ddr_s0 850000 uV
Model: Rockchip RK3588 TOYBRICK X10 Board
Load SnMacAc from vendor: sn TC050A462001CA, mac 10dcb690aba4
optee api revision: 2.0
TEEC: Waring: Could not find security partition
I/TC: RPMB: Using generated key
Load SnMacAc from rpmb: sn TC050A462001CA, mac 10dcb690aba4
Toybrick check SnMacAc OK, sn TC050A462001CA
CLK: (uboot. arm: enter 1200000 KHz, init 1200000 KHz, kernel 0N/A)
b0pll 1200000 KHz
b1pll 1200000 KHz
lpll 1200000 KHz
v0pll 24000 KHz
aupll 786215 KHz
cpll 1500000 KHz
gpll 1188000 KHz
npll 850000 KHz
ppll 1100000 KHz
aclk_center_root 702000 KHz
pclk_center_root 100000 KHz
hclk_center_root 396000 KHz
aclk_center_low_root 500000 KHz
aclk_top_root 750000 KHz
pclk_top_root 100000 KHz
aclk_low_top_root 396000 KHz
Net: eth0: ethernet@fe1b0000
Hit key to stop autoboot('CTRL+C'): 0
ANDROID: reboot reason: "(none)"
Not AVB images, AVB skip
android_image_load_by_partname: Can't find part: boot
Android image load failed
Android boot failed, error -1.
## Booting FIT Image FIT: No boot partition
FIT: No fit blob
FIT: No FIT image
Unknown command 'bootrkp' - try 'help'
MMC: no card present
mmc_init: -123, time 0
switch to partitions #0, OK
mmc0(part 0) is current device
Scanning mmc 0:3...
Found /extlinux/extlinux.conf
Retrieving file: /extlinux/extlinux.conf
205 bytes read in 5 ms (40 KiB/s)
1: rockchip-kernel-5.10
Retrieving file: /extlinux/Image
31832576 bytes read in 180 ms (168.7 MiB/s)
append: earlycon=uart8250,mmio32,0xfeb50000 root=PARTUUID=614e0000-0000-4b53-8000-1d28000054a9 rw rootwait rootfstype=ext4
Retrieving file: /extlinux/toybrick.dtb
162338 bytes read in 5 ms (31 MiB/s)
Fdt Ramdisk skip relocation
## Flattened Device Tree blob at 0x0a100000
Booting using the fdt blob at 0x0a100000
'reserved-memory' cma: addr=10000000 size=10000000
Using Device Tree in place at 000000000a100000, end 000000000a12aa21
Adding bank: 0x00200000 - 0x08400000 (size: 0x08200000)
Adding bank: 0x09400000 - 0xf0000000 (size: 0xe6c00000)
Adding bank: 0x100000000 - 0x200000000 (size: 0x100000000)
Total: 439.944 ms
Starting kernel ...
[ 0.556081] Booting Linux on physical CPU 0x0000000000 [0x412fd050]
[ 0.556107] Linux version 5.10.66 (toybrick@toybrick) (Android (7284624, based on r416183b) clang version 12.0.5 (https://android.googlesource.com/toolchain/llvm-project c935d99d7cf2016289302412d708641d52d2f7ee), LLD 12.0.5 (/buildbot/src/android/llvm-toolchain/out/llvm-project/lld c935d99d7cf2016289302412d708641d52d2f7ee)) #2 SMP Thu Jun 30 05:42:35 EDT 2022
[ 0.566095] Machine model: Rockchip RK3588 TOYBRICK X10 Board
[ 0.566125] earlycon: uart8250 at MMIO32 0x00000000feb50000 (options '')
[ 0.570743] printk: bootconsole [uart8250] enabled |
|
收藏
闽公网安备 35010202001061号