【关闭】开机之后总是提示cdn-dp错误

[复制链接] · 发表于 2019-7-7 09:26:20

本帖最后由 liqb365 于 2020-10-18 07:30 编辑

烧写的是：image-TB-RK3399ProD-Release-V1.3.rar里面的镜像
开机之后不断提示：
cdn-dp fec00000.dp: Direct firmware load for rockchip/dptx.bin failed with error -2

adb无法连接。

跟踪了一下log，是drivers/base/firmware_class.c报出的错误，具体含义不太理解。
请问这个是什么问题？怎么解决？

下面是开机log：
[ 2.388642] RTW: hal_com_config_channel_plan chplan:0x20
[ 2.475694] RTW: rtw_regsty_chk_target_tx_power_valid return _FALSE for band:0, path:0, rs:0, t:-1
[ 2.477560] RTW: rtw_ndev_init(wlan0) if1 mac_addr=20:32:33:7b:9b:30
[ 2.479939] RTW: rtw_ndev_init(p2p0) if2 mac_addr=22:32:33:7b:9b:30
[ 2.508504] usb 3-1: New USB device found, idVendor=05e3, idProduct=0610
[ 2.508510] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.508514] usb 3-1: Product: USB2.0 Hub
[ 2.508518] usb 3-1: Manufacturer: GenesysLogic
[ 2.520226] hub 3-1:1.0: USB hub found
[ 2.521364] hub 3-1:1.0: 4 ports detected
[ 2.597344] cdn-dp fec00000.dp: Direct firmware load for rockchip/dptx.bin failed with error -2
[ 2.721253] xhci-hcd xhci-hcd.10.auto: remove, state 4
[ 2.724848] usb usb1: USB disconnect, device number 1
[ 2.729550] xhci-hcd xhci-hcd.10.auto: USB bus 1 deregistered
[ 2.942870] phy phy-ff770000.syscon:usb2-phy@e450.5: charger = USB_SDP_CHARGER
[ 2.951424] Waiting for root device PARTUUID=614e0000-0000-4b53-8000-1d28000054a9...
[ 2.954622] rockchip-dwc3 usb0: USB peripheral connected
[ 4.598592] cdn-dp fec00000.dp: Direct firmware load for rockchip/dptx.bin failed with error -2
[ 5.139336] fusb302 8-0022: PD disabled
[ 8.603595] cdn-dp fec00000.dp: Direct firmware load for rockchip/dptx.bin failed with error -2
[ 14.965526] random: nonblocking pool is initialized
[ 16.608589] cdn-dp fec00000.dp: Direct firmware load for rockchip/dptx.bin failed with error -2
[ 32.614370] cdn-dp fec00000.dp: Direct firmware load for rockchip/dptx.bin failed with error -2
[ 64.619497] cdn-dp fec00000.dp: Direct firmware load for rockchip/dptx.bin failed with error -2
[ 128.625484] cdn-dp fec00000.dp: [drm:cdn_dp_request_firmware] *ERROR* Timed out trying to load firmware

只看该作者 · 发表于 2019-7-8 14:35:33

你好，你重现烧写下boot.img boot_linux.img uboot.img试下

只看该作者 · 发表于 2019-7-9 07:32:16

这个问题是这样的，我烧写的时候，给flash.py脚本用的是-d选项。事实上，我只想烧写Android，所以改成-a之后没有出现这个问题。
虽然-d仍然存在这个问题，但是对于我而言，可以先不关注了。RK的工程师看到了可以去试试-d选项，进一步确认一下问题。