Toybrick

标题: kernel编译问题 [打印本页]

作者: 虚空之龙    时间: 2021-7-21 15:19
标题: kernel编译问题
编译kernel这几个不同的参数是不同的dtb?TB-RK3568X需要选哪个?
  ./make-linux.sh TB-RK3568C1-C
  ./make-linux.sh TB-RK3568X0
  ./make-linux.sh TB-RK3568Xs0
  ./make-linux.sh TB-RK3568X1-C
  ./make-linux.sh TB-RK3568X0-C


branch:develop-4.19


目前烧了C1-C, X0,X1-C,好像有配置信息找不到,串口输出如下:

Device 0: Vendor: Flash    Rev: 2.00 Prod: Disk 3.0        
            Type: Removable Hard Disk
            Capacity: 60500.0 MB = 59.0 GB (123904000 x 512)
... is now current device
** No partition table - usb 0 **
ethernet@fe010000 Waiting for PHY auto negotiation to complete......... TIMEOUT !
phy_startup() failed: -110FAILED: -110ethernet@fe2a0000 Waiting for PHY auto negotiation to complete. done
BOOTP broadcast 1
DHCP client bound to address 10.8.54.145 (5 ms)
*** Warning: no boot file name; using '0A083691.img'
Using ethernet@fe2a0000 device
TFTP from server 0.0.0.0; our IP address is 10.8.54.145; sending through gateway 10.8.54.1
Filename '0A083691.img'.
Load address: 0xc00800
Loading: T T T T T T T T T T
Retry count exceeded; starting again
missing environment variable: pxeuuid
Retrieving file: /extlinux/pxelinux.cfg/01-0a-0c-11-22-33-47
*** ERROR: `serverip' not set
Retrieving file: /extlinux/pxelinux.cfg/0A083691
*** ERROR: `serverip' not set
Retrieving file: /extlinux/pxelinux.cfg/0A08369
*** ERROR: `serverip' not set
Retrieving file: /extlinux/pxelinux.cfg/0A0836
*** ERROR: `serverip' not set
Retrieving file: /extlinux/pxelinux.cfg/0A083
*** ERROR: `serverip' not set
Retrieving file: /extlinux/pxelinux.cfg/0A08
*** ERROR: `serverip' not set
Retrieving file: /extlinux/pxelinux.cfg/0A0
*** ERROR: `serverip' not set
Retrieving file: /extlinux/pxelinux.cfg/0A
*** ERROR: `serverip' not set
Retrieving file: /extlinux/pxelinux.cfg/0
*** ERROR: `serverip' not set
Retrieving file: /extlinux/pxelinux.cfg/default-arm-rockchip
*** ERROR: `serverip' not set
Retrieving file: /extlinux/pxelinux.cfg/default-arm
*** ERROR: `serverip' not set
Retrieving file: /extlinux/pxelinux.cfg/default
*** ERROR: `serverip' not set
Config file not found
BOOTP broadcast 1
DHCP client bound to address 10.8.54.145 (11 ms)
Using ethernet@fe2a0000 device
TFTP from server 0.0.0.0; our IP address is 10.8.54.145; sending through gateway 10.8.54.1
Filename 'boot.scr.uimg'.
Load address: 0xc00000
Loading: T T T T T T T T T T
Retry count exceeded; starting again




@jefferyzhang

作者: 395876134    时间: 2021-7-21 16:17
请问你用的是什么板子?
作者: 395876134    时间: 2021-7-21 16:30
http://t.rock-chips.com/wiki.php ... 8F%91/Kernel#hash_1
./make-linux.sh arm64
作者: 虚空之龙    时间: 2021-7-21 17:07
OK了,谢谢, rk3568




欢迎光临 Toybrick (https://t.rock-chips.com/) Powered by Discuz! X3.3