Toybrick

标题: rk3568使用distro启动的时候无法正确加载Image [打印本页]

作者: yueliang12345 时间: 2025-3-12 22:34
标题: rk3568使用distro启动的时候无法正确加载Image
[debug] Entered ext4fs_find_file with path: /extlinux/extlinux.conf
[debug] Calling ext4fs_find_file1 with path: /extlinux/extlinux.conf
[debug] Processing path: /extlinux/extlinux.conf
[debug] Found node, checking type. Expected type: 1, Found type: 1
[debug] Successfully found and verified file or directory.
Found /extlinux/extlinux.conf
[Debug]Retrieving file: /extlinux/extlinux.conf
[Debug]do_get_any function
[Debug]do_get_any inner function
[Debug]do_get_any inner function c00000
[Debug]do_get_any inner function /extlinux/extlinux.conf
[Debug]fs_readAttempting to find file: /extlinux/extlinux.conf
[debug] Entered ext4fs_find_file with path: /extlinux/extlinux.conf
[debug] Calling ext4fs_find_file1 with path: /extlinux/extlinux.conf
[debug] Processing path: /extlinux/extlinux.conf
[debug] Found node, checking type. Expected type: 1, Found type: 1
[debug] Successfully found and verified file or directory.
199 bytes read in 5 ms (38.1 KiB/s)
1:    rockchip-kernel-5.10
[Debug]Retrieving file: /Image
[Debug]do_get_any function
[Debug]do_get_any inner function
[Debug]do_get_any inner function 280000
[Debug]do_get_any inner function /Image
[Debug]fs_readAttempting to find file: /Image
[debug] Entered ext4fs_find_file with path: /Image
[debug] Calling ext4fs_find_file1 with path: /Image
[debug] Processing path: /Image
[debug] Failed to find directory entry for: Image
[debug] ext4fs_find_file1 failed to find file or directory, error code: 0
, error code: 0file: /Image
**Debug] Attempting to find file: /Image
实际上是是可以打印的
=> ext4ls mmc 0:3 /
[debug] Entered ext4fs_find_file with path: /
[debug] Calling ext4fs_find_file1 with path: /
[debug] Processing path: /
[debug] Found node, checking type. Expected type: 2, Found type: 2
[debug] Successfully found and verified file or directory.
<DIR>    2048 .
<DIR>    2048 ..
<DIR>    2048 extlinux
      35717632 Image
      188005 rk3568-atk-evb1-ddr4-v10-linux.dtb

作者: yueliang12345 时间: 2025-3-12 22:35
上述debug是我加的打印，为什么配置文件可以被正常识别并加载但是内核并不能识别

作者: jax.fang 时间: 2025-3-13 09:05
本帖最后由 jax.fang 于 2025-3-13 09:08 编辑

1. 确认下cat /extlinux/extlinux.conf 看下路径Image 放的路径对不对 , log上是找/Image这个路径 2. kernel 配置确认CONFIG_EXT4_USE_FOR_EXT2是否有打开

作者: yueliang12345 时间: 2025-3-16 16:11

jax.fang 发表于 2025-3-13 09:05
1. 确认下cat /extlinux/extlinux.conf 看下路径Image 放的路径对不对 , log上是找/Image这个路径 2. ke ...

配置没问题最后我自己添加了新的命令相当于自己加载的就可以正常启动了

欢迎光临 Toybrick (https://t.rock-chips.com/)