Toybrick

标题: 单板串口打印如下错误会是哪些原因导致？ [打印本页]

作者: Projectaker 时间: 2019-2-12 22:22
标题: 单板串口打印如下错误会是哪些原因导致？
[ 3.055933] usb 1-1: New USB device found, idVendor=05e3, idProduct=0610
[ 3.064016] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.072018] usb 1-1: Product: USB2.0 Hub
[ 3.079699] usb 1-1: Manufacturer: GenesysLogic
[ 3.103587] RTW: rtw_regsty_chk_target_tx_power_valid return _FALSE for band:0, path:0, rs:0, t:-1
[ 3.110273] RTW: rtw_ndev_init(wlan0) if1 mac_addr=20:32:33:00:e1:4c
[ 3.117142] RTW: rtw_ndev_init(p2p0) if2 mac_addr=22:32:33:00:e1:4c
[ 3.117763] hub 1-1:1.0: USB hub found
[ 3.118754] hub 1-1:1.0: 4 ports detected
[ 3.158251] Waiting for root device PARTUUID=614e0000-0000-4b53-8000-1d28000054a9...
[ 4.671799] usb 1-1-port2: Cannot enable. Maybe the USB cable is bad?
[ 4.686966] cdn-dp fec00000.dp: Direct firmware load for rockchip/dptx.bin failed with error -2
[ 8.697962] cdn-dp fec00000.dp: Direct firmware load for rockchip/dptx.bin failed with error -2
[ 16.121718] random: nonblocking pool is initialized
[ 16.708961] cdn-dp fec00000.dp: Direct firmware load for rockchip/dptx.bin failed with error -2
[ 32.719957] cdn-dp fec00000.dp: Direct firmware load for rockchip/dptx.bin failed with error -2
[ 64.730960] cdn-dp fec00000.dp: Direct firmware load for rockchip/dptx.bin failed with error -2

作者: 我是流氓我怕谁 时间: 2019-2-13 09:59
你这个是Android系统还是Linux系统？

作者: Projectaker 时间: 2019-2-13 18:13

我是流氓我怕谁发表于 2019-2-13 09:59
你这个是Android系统还是Linux系统？

images-tb-rk3399prod-v1.0.tar.gz 烧录的是这个压缩包。
目前还没有详细了解板子情况，所以还是有些模糊。
请明确指点一下，谢谢

作者: Projectaker 时间: 2019-2-13 21:25

我是流氓我怕谁发表于 2019-2-13 09:59
你这个是Android系统还是Linux系统？

感谢了，回家重新烧录了一次，linux可以登陆进去了。

欢迎光临 Toybrick (https://t.rock-chips.com/)