| 
 | 
 
RK3399 启动卡死 卡死时候 VDD_GPU和VDD_CPU_B 同时从1.0V 变到0.82V. 求大神看看什么问题 
 
DDR Version 1.26 20210628 
In 
Channel 0: LPDDR3, 800MHz 
CS = 0 
MR0=0x58 
MR1=0x58 
MR2=0x58 
MR3=0x58 
MR4=0x2 
MR5=0x1 
MR6=0x5 
MR7=0x0 
MR8=0x1F 
MR9=0x1F 
MR10=0x1F 
MR11=0x1F 
MR12=0x1F 
MR13=0x1F 
MR14=0x1F 
MR15=0x1F 
MR16=0x1F 
Bus Width=32 Col=10 Bank=8 Row=15 CS=1 Die Bus-Width=32 Size=1024MB 
Channel 1: LPDDR3, 800MHz 
CS = 0 
MR0=0x58 
MR1=0x58 
MR2=0x58 
MR3=0x58 
MR4=0x2 
MR5=0x1 
MR6=0x5 
MR7=0x0 
MR8=0x1F 
MR9=0x1F 
MR10=0x1F 
MR11=0x1F 
MR12=0x1F 
MR13=0x1F 
MR14=0x1F 
MR15=0x1F 
MR16=0x1F 
Bus Width=32 Col=10 Bank=8 Row=15 CS=1 Die Bus-Width=32 Size=1024MB 
256B stride 
ch 0 ddrconfig = 0x101, ddrsize = 0x20 
ch 1 ddrconfig = 0x101, ddrsize = 0x20 
pmugrf_os_reg[2] = 0x3280D280, stride = 0x9 
OUT 
Boot1 Release Time: May 29 2020 17:36:36, version: 1.26 
CPUId = 0x0 
ChipType = 0x10, 341 
SdmmcInit=2 0 
BootCapSize=100000 
UserCapSize=14910MB 
FwPartOffset=2000 , 100000 
mmc0:cmd8,20 
mmc0:cmd5,20 
mmc0:cmd55,20 
mmc0:cmd1,20 
mmc0:cmd8,20 
mmc0:cmd5,20 
mmc0:cmd55,20 
mmc0:cmd1,20 
mmc0:cmd8,20 
mmc0:cmd5,20 
mmc0:cmd55,20 
mmc0:cmd1,20 
SdmmcInit=0 1 
StorageInit ok = 68555 
SecureMode = 0 
SecureInit read PBA: 0x4 
SecureInit read PBA: 0x404 
SecureInit read PBA: 0x804 
SecureInit read PBA: 0xc04 
SecureInit read PBA: 0x1004 
SecureInit read PBA: 0x1404 
SecureInit read PBA: 0x1804 
SecureInit read PBA: 0x1c04 
SecureInit ret = 0, SecureMode = 0 
atags_set_bootdev: ret 0) 
GPT part:  0, name:            uboot, start:0x4000, size:0x2000 
GPT part:  1, name:            trust, start:0x6000, size:0x2000 
GPT part:  2, name:             misc, start:0x8000, size:0x2000 
GPT part:  3, name:             boot, start:0xa000, size:0x10000 
GPT part:  4, name:         recovery, start:0x1a000, size:0x10000 
GPT part:  5, name:           backup, start:0x2a000, size:0x10000 
GPT part:  6, name:           rootfs, start:0x5a000, size:0x197600 
GPT part:  7, name:         userdata, start:0x1f1600, size:0x1b2d9df 
find part:uboot OK. first_lba:0x4000. 
find part:trust OK. first_lba:0x6000. 
Trust Addr:0x6000, 0x58334c42 
No find bl30.bin 
Load uboot, ReadLba = 4000 
Load OK, addr=0x200000, size=0xe70b0 
RunBL31 0x40000 @ 109471 us 
NOTICE:  BL31: v1.3(release):845ee93 
NOTICE:  BL31: Built : 15:51:11, Jul 22 2020 
NOTICE:  BL31: Rockchip release version: v1.1 
INFO:    GICv3 with legacy support detected. ARM GICV3 driver initialized in EL3 
INFO:    Using opteed sec cpu_context! 
INFO:    boot cpu mask: 0 
WARNING: pmu_power_domain_ctr: 4, 1, error! 
INFO:    plat_rockchip_pmu_init(1196): pd status 2e 
INFO:    BL31: Initializing runtime services 
INFO:    BL31: Initializing BL32 
INF [0x0] TEE-CORE:init_primary_helper:337: Initializing (1.1.0-278-gef70f120a #zhangzj #9 Fri Sep 17 09:39:24 UTC 2021 aarch64) 
 
INF [0x0] TEE-CORE:init_primary_helper:338: Release version: 1.2 
 
INF [0x0] TEE-CORE:init_teecore:83: teecore inits done 
INFO:    BL31: Preparing for EL3 exit to normal world 
INFO:    Entry point address = 0x200000 
INFO:    SPSR = 0x3c9 
 
 
U-Boot 2017.09-g948c63a14e #mittoyts (Dec 05 2021 - 19:43:51 -0800) 
 
Model: Firefly-RK3399 Board 
PreSerial: 2 
DRAM:  2 GiB 
Sysmem: init 
Relocation Offset: 7dbdd000, fdt: 7bdd14d8 
Using default environment 
 
dwmmc@fe320000: 1, sdhci@fe330000: 0 
Bootdev(atags): mmc 0 
MMC0: HS400, 50Mhz 
PartType: EFI 
boot mode: recovery (misc) 
Found DTB in recovery part 
DTB: rk-kernel.dtb 
HASH(c): OK 
Android header version 0 
I2c0 speed: 400000Hz 
PMIC:  RK808 
vdd_center 900000 uV 
vdd_cpu_l 900000 uV 
vdd_log 1100000 uV 
In:    serial 
Out:   serial 
Err:   serial 
Model: AIO-3399C Board (Linux Opensource) 
Rockchip UBOOT DRM driver version: v1.0.1 
CLK: (uboot. arml: enter 816000 KHz, init 816000 KHz, kernel 0N/A) 
CLK: (uboot. armb: enter 816000 KHz, init 816000 KHz, kernel 0N/A) 
  aplll 816000 KHz 
  apllb 816000 KHz 
  dpll 800000 KHz 
  cpll 24000 KHz 
  gpll 800000 KHz 
  npll 600000 KHz 
  vpll 24000 KHz 
  aclk_perihp 133333 KHz 
  hclk_perihp 66666 KHz 
  pclk_perihp 33333 KHz 
  aclk_perilp0 266666 KHz 
  hclk_perilp0 88888 KHz 
  pclk_perilp0 44444 KHz 
  hclk_perilp1 100000 KHz 
  pclk_perilp1 50000 KHz 
Net:   No ethernet found. 
Hit key to stop autoboot('CTRL+C'):  0 
ANDROID: reboot reason: "recovery" 
Booting IMAGE kernel at 0x00280000 with fdt at 0x08300000... 
 
 
Fdt Ramdisk skip relocation 
## Booting Android Image at 0x0027f800 ... 
Kernel load addr 0x00280000 size 22483 KiB 
RAM disk load addr 0x0a200000 size 8513 KiB 
## Flattened Device Tree blob at 08300000 
   Booting using the fdt blob at 0x8300000 
   XIP Kernel Image from 0x00280000 to 0x00280000 ... OK 
  'reserved-memory' ramoops@110000: addr=110000 size=f0000 
   Using Device Tree in place at 0000000008300000, end 000000000831c5a2 
No file: logo_kernel.bmp 
logo_bmp uncompressed size=127818 
Adding bank: 0x00200000 - 0x08400000 (size: 0x08200000) 
Adding bank: 0x0a200000 - 0x80000000 (size: 0x75e00000) 
Total: 4244.535 ms 
 
Starting kernel ... 
 
[    0.000000] Booting Linux on physical CPU 0x0 
[    0.000000] Initializing cgroup subsys cpuset 
[    0.000000] Initializing cgroup subsys cpu 
[    0.000000] Initializing cgroup subsys cpuacct 
[    0.000000] Linux version 4.4.194+ (mittoyts@ubuntu) (firefly: 9952a20c48c04d357761eea42e08d34732cbc554) (gcc version 6.3.1 20170404 (Linaro GCC 6.3-2017.05) ) #2 SMP Fri Dec 3 01:30:17 PST 2021 
[    0.000000] Boot CPU: AArch64 Processor [410fd034] 
[    0.000000] earlycon: Early serial console at MMIO32 0xff1a0000 (options '') 
[    0.000000] bootconsole [uart0] enabled 
[    0.000000] psci: probing for conduit method from DT. 
[    0.000000] psci: PSCIv1.0 detected in firmware. 
[    0.000000] psci: Using standard PSCI v0.2 function IDs 
[    0.000000] psci: Trusted OS migration not required 
[    0.000000] PERCPU: Embedded 21 pages/cpu @ffffffc07fee0000 s46312 r8192 d31512 u86016 
[    0.000000] Detected VIPT I-cache on CPU0 
[    0.000000] CPU features: enabling workaround for ARM erratum 845719 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 507912 
[    0.000000] Kernel command line: storagemedia=emmc androidboot.storagemedia=emmc androidboot.mode=normal  recovery androidboot.slot_suffix= androidboot.serialno=916283bd2444dbd8  ro rootwait earlycon=uart8250,mmio32,0xff1a0000 swiotlb=1 console=ttyFIQ0 root=PARTLABEL=rootfs rootfstype=ext4 overlayroot=device:dev=PARTLABEL=userdata,fstype=ext4,mkfs=1 coherent_pool=1m systemd.gpt_auto=0 cgroup_enable=memory swapaccount=1 
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) 
[    0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) 
[    0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) 
[    0.000000] software IO TLB: mapped [mem 0x7fe98000-0x7fed8000] (0MB) 
[    0.000000] Memory: 1992680K/2064384K available (14078K kernel code, 1810K rwdata, 5340K rodata, 1216K init, 2013K bss, 71704K reserved, 0K cma-reserved) 
[    0.000000] Virtual kernel memory layout: 
[    0.000000]     modules : 0xffffff8000000000 - 0xffffff8008000000   (   128 MB) 
[    0.000000]     vmalloc : 0xffffff8008000000 - 0xffffffbdbfff0000   (   246 GB) 
[    0.000000]       .init : 0xffffff8009380000 - 0xffffff80094b0000   (  1216 KB) 
[    0.000000]       .text : 0xffffff8008080000 - 0xffffff8008e40000   ( 14080 KB) 
[    0.000000]     .rodata : 0xffffff8008e40000 - 0xffffff8009380000   (  5376 KB) 
[    0.000000]       .data : 0xffffff80094b0000 - 0xffffff8009674808   (  1811 KB) 
[    0.000000]     vmemmap : 0xffffffbdc0000000 - 0xffffffbfc0000000   (     8 GB maximum) 
[    0.000000]               0xffffffbdc0008000 - 0xffffffbdc2000000   (    31 MB actual) 
[    0.000000]     fixed   : 0xffffffbffe7fb000 - 0xffffffbffec00000   (  4116 KB) 
[    0.000000]     PCI I/O : 0xffffffbffee00000 - 0xffffffbfffe00000   (    16 MB) 
[    0.000000]     memory  : 0xffffffc000200000 - 0xffffffc080000000   (  2046 MB) 
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 
[    0.000000] Hierarchical RCU implementation. 
[    0.000000]  Build-time adjustment of leaf fanout to 64. 
[    0.000000]  RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=6. 
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=6 
[    0.000000] NR_IRQS:64 nr_irqs:64 0 
[    0.000000] GIC: Using split EOI/Deactivate mode 
[    0.000000] ITS: /interrupt-controller@fee00000/interrupt-controller@fee20000 
[    0.000000] ITS: allocated 65536 Devices @7d080000 (psz 64K, shr 0) 
[    0.000000] ITS: using cache flushing for cmd queue 
[    0.000000] GIC: using LPI property table @0x000000007d010000 
[    0.000000] ITS: Allocated 1792 chunks for LPIs 
[    0.000000] CPU0: found redistributor 0 region 0:0x00000000fef00000 
[    0.000000] CPU0: using LPI pending table @0x000000007d020000 
[    0.000000] GIC: using cache flushing for LPI property table 
[    0.000000] GIC: PPI partition interrupt-partition-0[0] { /cpus/cpu@0[0] /cpus/cpu@1[1] /cpus/cpu@2[2] /cpus/cpu@3[3] } 
[    0.000000] GIC: PPI partition interrupt-partition-1[1] { /cpus/cpu@100[4] /cpus/cpu@101[5] } 
[    0.000000] rockchip_clk_register_frac_branch: could not find dclk_vop0_frac as parent of dclk_vop0, rate changes may not work 
[    0.000000] rockchip_clk_register_frac_branch: could not find dclk_vop1_frac as parent of dclk_vop1, rate changes may not work 
[    0.000000] Architected cp15 timer(s) running at 24.00MHz (phys). 
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns 
[    0.000006] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns 
[    0.002206] Console: colour dummy device 80x25 
[    0.002646] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=24000) 
[    0.003633] pid_max: default: 32768 minimum: 301 
[    0.004155] Security Framework initialized 
[    0.004616] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes) 
[    0.005256] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes) 
[    0.006609] Initializing cgroup subsys io 
[    0.007015] Initializing cgroup subsys memory 
[    0.007455] Initializing cgroup subsys devices 
[    0.007885] Initializing cgroup subsys freezer 
[    0.008325] Initializing cgroup subsys perf_event 
[    0.008779] Initializing cgroup subsys net_prio 
[    0.009216] Initializing cgroup subsys pids 
[    0.009646] ftrace: allocating 51034 entries in 200 pages 
[    0.132530] sched-energy: Sched-energy-costs installed from DT 
[    0.133095] CPU0: update cpu_capacity 401 
[    0.133533] ASID allocator initialised with 32768 entries 
[    0.137259] PCI/MSI: /interrupt-controller@fee00000/interrupt-controller@fee20000 domain created 
[    0.138587] Platform MSI: /interrupt-controller@fee00000/interrupt-controller@fee20000 domain created 
[    0.140789] Detected VIPT I-cache on CPU1 
[    0.140819] CPU1: found redistributor 1 region 0:0x00000000fef20000 
[    0.140843] CPU1: using LPI pending table @0x000000007d2c0000 
[    0.140881] CPU1: update cpu_capacity 401 
[    0.140884] CPU1: Booted secondary processor [410fd034] 
[    0.141417] Detected VIPT I-cache on CPU2 
[    0.141437] CPU2: found redistributor 2 region 0:0x00000000fef40000 
[    0.141460] CPU2: using LPI pending table @0x000000007d2f0000 
[    0.141484] CPU2: update cpu_capacity 401 
[    0.141488] CPU2: Booted secondary processor [410fd034] 
[    0.142010] Detected VIPT I-cache on CPU3 
[    0.142030] CPU3: found redistributor 3 region 0:0x00000000fef60000 
[    0.142053] CPU3: using LPI pending table @0x000000007d340000 
[    0.142077] CPU3: update cpu_capacity 401 
[    0.142081] CPU3: Booted secondary processor [410fd034] 
[    1.147320] CPU4: failed to come online 
[    1.154885] CPU4: failed in unknown state : 0x0 
[    1.155793] Detected PIPT I-cache on CPU5 
[    1.155818] CPU5: found redistributor 101 region 0:0x00000000fefa0000 
[    1.155851] CPU5: using LPI pending table @0x000000007d3a0000 
[    1.155886] CPU5: update cpu_capacity 1024 
[    1.155889] CPU5: Booted secondary processor [410fd082] 
[    1.155985] Brought up 5 CPUs 
[    1.158702] SMP: Total of 5 processors activated. 
[    1.159151] CPU features: detected feature: GIC system register CPU interface 
[    1.159839] CPU features: detected feature: 32-bit EL0 Support 
[    1.160396] CPU: All CPU(s) started at EL2 
[    1.160818] alternatives: patching kernel code 
[    1.162493] devtmpfs: initialized 
[    1.189182] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns 
[    1.190137] futex hash table entries: 2048 (order: 5, 131072 bytes) 
[    1.191260] xor: measuring software checksum speed 
[    1.201607]    8regs     :  1468.000 MB/sec 
[    1.211660]    8regs_prefetch:  1316.000 MB/sec 
[    1.221714]    32regs    :  1984.000 MB/sec 
[    1.231766]    32regs_prefetch:  1664.000 MB/sec 
[    1.232205] xor: using function: 32regs (1984.000 MB/sec) 
[    1.232783] pinctrl core: initialized pinctrl subsystem 
[    1.235010] Failed to find legacy iommu devices 
[    1.235821] NET: Registered protocol family 16 
[    1.244486] cpuidle: using governor ladder 
[    1.256533] cpuidle: using governor menu 
[    1.256923] Registered FIQ tty driver 
[    1.257806] vdso: 2 pages (1 code @ ffffff8008e46000, 1 data @ ffffff80094b4000) 
[    1.258538] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. 
[    1.259602] DMA: preallocated 1024 KiB pool for atomic allocations 
[    1.282971] console [pstore-1] enabled 
[    1.283334] pstore: Registered ramoops as persistent store backend 
[    1.283933] ramoops: attached 0xf0000@0x110000, ecc: 0/0 
[    1.286792] console [ttyFIQ0] enabled 
[    1.286792] console [ttyFIQ0] enabled 
[    1.287482] bootconsole [uart0] disabled 
[    1.287482] bootconsole [uart0] disabled 
[    1.288434] Registered fiq debugger ttyFIQ0 
[    1.341469] raid6: int64x1  gen()   468 MB/s 
[    1.358508] raid6: int64x1  xor()   412 MB/s 
[    1.375652] raid6: int64x2  gen()   675 MB/s 
[    1.392680] raid6: int64x2  xor()   605 MB/s 
[    1.409792] raid6: int64x4  gen()   976 MB/s 
[    1.426850] raid6: int64x4  xor()   675 MB/s 
[    1.443953] raid6: int64x8  gen()   781 MB/s 
[    1.461022] raid6: int64x8  xor()   630 MB/s 
[    1.478145] raid6: neonx1   gen()   964 MB/s 
[    1.495228] raid6: neonx1   xor()   675 MB/s 
[    1.512298] raid6: neonx2   gen()  1273 MB/s 
[    1.529371] raid6: neonx2   xor()   968 MB/s 
[    1.546464] raid6: neonx4   gen()  1726 MB/s 
[    1.563568] raid6: neonx4   xor()  1175 MB/s 
[    1.580661] raid6: neonx8   gen()  1695 MB/s 
[    1.597732] raid6: neonx8   xor()  1234 MB/s 
[    1.598116] raid6: using algorithm neonx4 gen() 1726 MB/s 
[    1.598597] raid6: .... xor() 1175 MB/s, rmw enabled 
[    1.599038] raid6: using intx1 recovery algorithm 
[    1.602903] iommu: Adding device ff650000.vpu_service to group 0 
[    1.603512] iommu: Adding device ff660000.rkvdec to group 1 
[    1.604126] iommu: Adding device ff8f0000.vop to group 2 
[    1.604685] iommu: Adding device ff900000.vop to group 3 
[    1.605621] rk_iommu ff650800.iommu: can't get sclk 
[    1.606306] rk_iommu ff660480.iommu: can't get sclk 
[    1.606923] rk_iommu ff8f3f00.iommu: can't get sclk 
[    1.607514] rk_iommu ff903f00.iommu: can't get sclk 
[    1.608279] SCSI subsystem initialized 
[    1.608963] usbcore: registered new interface driver usbfs 
[    1.609487] usbcore: registered new interface driver hub 
[    1.610073] usbcore: registered new device driver usb 
[    1.610589] media: Linux media interface: v0.10 
[    1.611048] Linux video capture interface: v2.00 
[    1.611531] pps_core: LinuxPPS API ver. 1 registered 
[    1.611973] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> 
[    1.612801] PTP clock support registered 
[    1.614222] Advanced Linux Sound Architecture Driver Initialized. 
[    1.615249] Bluetooth: Core ver 2.21 
[    1.615598] NET: Registered protocol family 31 
[    1.616005] Bluetooth: HCI device and connection manager initialized 
[    1.616567] Bluetooth: HCI socket layer initialized 
[    1.617001] Bluetooth: L2CAP socket layer initialized 
[    1.617479] Bluetooth: SCO socket layer initialized 
[    1.618403] nfc: nfc_init: NFC Core ver 0.1 
[    1.618808] NET: Registered protocol family 39 
[    1.619323] rockchip-cpuinfo cpuinfo: Serial         : 916283bd2444dbd8 
[    1.620660] clocksource: Switched to clocksource arch_sys_counter 
[    1.673139] thermal thermal_zone1: power_allocator: sustainable_power will be estimated 
[    1.674057] NET: Registered protocol family 2 
[    1.674866] TCP established hash table entries: 16384 (order: 5, 131072 bytes) 
[    1.675632] TCP bind hash table entries: 16384 (order: 7, 524288 bytes) 
[    1.676678] TCP: Hash tables configured (established 16384 bind 16384) 
[    1.677327] UDP hash table entries: 1024 (order: 4, 98304 bytes) 
[    1.677953] UDP-Lite hash table entries: 1024 (order: 4, 98304 bytes) 
[    1.678786] NET: Registered protocol family 1 
[    1.679424] RPC: Registered named UNIX socket transport module. 
[    1.679964] RPC: Registered udp transport module. 
[    1.680383] RPC: Registered tcp transport module. 
[    1.680811] RPC: Registered tcp NFSv4.1 backchannel transport module. 
[    1.682031] Trying to unpack rootfs image as initramfs... 
[    2.134303] Freeing initrd memory: 8512K 
[    2.135382] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available 
[    2.136190] hw perfevents: enabled with armv8_cortex_a72 PMU driver, 7 counters available 
[    2.139624] audit: initializing netlink subsys (disabled) 
[    2.140152] audit: type=2000 audit(2.046:1): initialized 
[    2.141030] Initialise system trusted keyring 
[    2.149412] squashfs: version 4.0 (2009/01/31) Phillip Lougher 
[    2.150695] NFS: Registering the id_resolver key type 
[    2.151168] Key type id_resolver registered 
[    2.151542] Key type id_legacy registered 
[    2.151928] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). 
[    2.153194] ntfs: driver 2.1.32 [Flags: R/O]. 
[    2.153969] fuse init (API version 7.23) 
[    2.154669] SGI XFS with security attributes, no debug enabled 
[    2.160530] NET: Registered protocol family 38 
[    2.160963] Key type asymmetric registered 
[    2.161333] Asymmetric key parser 'x509' registered 
[    2.161922] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246) 
[    2.162722] io scheduler noop registered 
[    2.163077] io scheduler deadline registered 
[    2.163488] io scheduler cfq registered (default) 
[    2.165425] phy phy-ff770000.syscon:usb2-phy@e460.1: Failed to get VBUS supply regulator 
[    2.169878] ace test_init function. 
[    2.170356] ace test_init end.ret=0 
[    2.171036] radar end.ret=0 
[    2.173704] rockchip-pcie f8000000.pcie: no vpcie3v3 regulator found 
[    2.174297] rockchip-pcie f8000000.pcie: no vpcie1v8 regulator found 
[    2.174900] rockchip-pcie f8000000.pcie: no vpcie0v9 regulator found 
[    2.175469] rockchip-pcie f8000000.pcie: missing "memory-region" property 
[    2.176088] PCI host bridge /pcie@f8000000 ranges: 
[    2.176530]   MEM 0xfa000000..0xfbdfffff -> 0xfa000000 
[    2.176998]    IO 0xfbe00000..0xfbefffff -> 0xfbe00000 
[    2.718704] rockchip-pcie f8000000.pcie: PCIe link training gen1 timeout! 
[    2.719309] rockchip-pcie f8000000.pcie: deferred probe failed 
[    2.719919] rockchip-pcie: probe of f8000000.pcie failed with error -110 
[    2.721093] Module initialized. 
[    2.721669] rk-vcodec ff650000.vpu_service: no regulator for vcodec 
[    2.722487] rk-vcodec ff650000.vpu_service: probe device 
[    2.723190] rk-vcodec ff650000.vpu_service: drm allocator with mmu enabled 
[    2.724329] rk-vcodec ff650000.vpu_service: could not find power_model node 
[    2.724961] rk-vcodec ff650000.vpu_service: init success 
[    2.725673] rk-vcodec ff660000.rkvdec: no regulator for vcodec 
[    2.726574] rk-vcodec ff660000.rkvdec: probe device 
[    2.727206] rk-vcodec ff660000.rkvdec: drm allocator with mmu enabled 
[    2.728189] rk-vcodec ff660000.rkvdec: could not find power_model node 
[    2.728787] rk-vcodec ff660000.rkvdec: init success 
[    2.730610] dma-pl330 ff6d0000.dma-controller: Loaded driver for PL330 DMAC-241330 
[    2.731300] dma-pl330 ff6d0000.dma-controller:       DBUFF-32x8bytes Num_Chans-6 Num_Peri-12 Num_Events-12 
[    2.733529] dma-pl330 ff6e0000.dma-controller: Loaded driver for PL330 DMAC-241330 
[    2.734216] dma-pl330 ff6e0000.dma-controller:       DBUFF-128x8bytes Num_Chans-8 Num_Peri-20 Num_Events-16 
[    2.736043] rockchip-system-monitor rockchip-system-monitor: system monitor probe 
[    2.737257] pwm-regulator: supplied by vcc5v0_sys 
[    2.738342] Serial: 8250/16550 driver, 5 ports, IRQ sharing disabled 
[    2.739500] ff180000.serial: ttyS0 at MMIO 0xff180000 (irq = 37, base_baud = 1500000) is a 16550A 
[    2.742030] [drm] Initialized drm 1.1.0 20060810 
[    2.746278] [drm] Rockchip DRM driver version: v1.0.1 
[    2.748852] mali ff9a0000.gpu: Failed to get regulator 
[    2.749307] mali ff9a0000.gpu: Power control initialization failed 
[    2.750186] Unable to detect cache hierarchy for CPU 0 
[    2.751407] brd: module loaded 
[    2.756835] loop: module loaded 
[    2.757681] zram: Added device: zram0 
[    2.758300] lkdtm: No crash points registered, enable through debugfs 
[    2.759215] Loading dl1825 driver 
[    2.761072] rockchip-spi ff1d0000.spi: no high_speed pinctrl state 
[    2.762463] 11wk2xxx_probe: setup mode 0, 8 bits/w, 10000000 Hz max 
[    2.933501] wk2xxx_probe()  GENA = 0xFF 
[    2.933858] spi driver  error!!!! 
[    2.934182] wk2xxxspi: probe of spi32766.0 failed with error 1 
[    2.934732] register spi return v = :0 
[    2.935549] tun: Universal TUN/TAP device driver, 1.6 
[    2.936022] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com> 
[    2.937523] force_sf_dma_mode is ignored if force_thresh_dma_mode is set. 
[    2.938244] rk_gmac-dwmac fe300000.ethernet: clock input or output? (input). 
[    2.938884] rk_gmac-dwmac fe300000.ethernet: TX delay(0x2b). 
[    2.939386] rk_gmac-dwmac fe300000.ethernet: RX delay(0x23). 
[    2.939908] rk_gmac-dwmac fe300000.ethernet: integrated PHY? (no). 
[    2.940613] rk_gmac-dwmac fe300000.ethernet: cannot get clock clk_mac_speed 
[    2.941236] rk_gmac-dwmac fe300000.ethernet: clock input from PHY 
[    2.946794] rk_gmac-dwmac fe300000.ethernet: init for RGMII 
[    2.947405] stmmac - user ID: 0x10, Synopsys ID: 0x35 
[    2.947867]  Ring mode enabled 
[    2.948148]  DMA HW capability register supported 
[    2.948553]  Normal descriptors 
[    2.948866]  RX Checksum Offload Engine supported (type 2) 
[    2.949353]  Wake-Up On Lan supported 
[    2.949717]  Enable RX Mitigation via HW Watchdog Timer 
[    3.059727] libphy: stmmac: probed 
[    3.060045] eth%d: PHY ID 00000000 at 0 IRQ POLL (stmmac-0:00) active 
[    3.060616] eth%d: PHY ID 00000000 at 1 IRQ POLL (stmmac-0:01) 
[    3.061239] eth%d: PHY ID 00000000 at 2 IRQ POLL (stmmac-0:02) 
[    3.061774] eth%d: PHY ID 00000000 at 3 IRQ POLL (stmmac-0:03) 
[    3.062297] eth%d: PHY ID 00000000 at 4 IRQ POLL (stmmac-0:04) 
[    3.062827] eth%d: PHY ID 00000000 at 5 IRQ POLL (stmmac-0:05) 
[    3.063349] eth%d: PHY ID 00000000 at 6 IRQ POLL (stmmac-0:06) 
[    3.063878] eth%d: PHY ID 00000000 at 7 IRQ POLL (stmmac-0:07) 
[    3.064399] eth%d: PHY ID 00000000 at 8 IRQ POLL (stmmac-0:08) 
[    3.064930] eth%d: PHY ID 00000000 at 9 IRQ POLL (stmmac-0:09) 
[    3.065452] eth%d: PHY ID 00000000 at 10 IRQ POLL (stmmac-0:0a) 
[    3.065982] eth%d: PHY ID 00000000 at 11 IRQ POLL (stmmac-0:0b) 
[    3.066505] eth%d: PHY ID 00000000 at 12 IRQ POLL (stmmac-0:0c) 
[    3.067034] eth%d: PHY ID 00000000 at 13 IRQ POLL (stmmac-0:0d) 
[    3.067556] eth%d: PHY ID 00000000 at 14 IRQ POLL (stmmac-0:0e) 
[    3.068088] eth%d: PHY ID 00000000 at 15 IRQ POLL (stmmac-0:0f) 
[    3.068610] eth%d: PHY ID 00000000 at 16 IRQ POLL (stmmac-0:10) 
[    3.069140] eth%d: PHY ID 00000000 at 17 IRQ POLL (stmmac-0:11) 
[    3.069669] eth%d: PHY ID 00000000 at 18 IRQ POLL (stmmac-0:12) 
[    3.070192] eth%d: PHY ID 00000000 at 19 IRQ POLL (stmmac-0:13) 
[    3.070723] eth%d: PHY ID 00000000 at 20 IRQ POLL (stmmac-0:14) 
[    3.071246] eth%d: PHY ID 00000000 at 21 IRQ POLL (stmmac-0:15) 
[    3.071775] eth%d: PHY ID 00000000 at 22 IRQ POLL (stmmac-0:16) 
[    3.072298] eth%d: PHY ID 00000000 at 23 IRQ POLL (stmmac-0:17) 
[    3.072826] eth%d: PHY ID 00000000 at 24 IRQ POLL (stmmac-0:18) 
[    3.073349] eth%d: PHY ID 00000000 at 25 IRQ POLL (stmmac-0:19) 
[    3.073879] eth%d: PHY ID 00000000 at 26 IRQ POLL (stmmac-0:1a) 
[    3.074402] eth%d: PHY ID 00000000 at 27 IRQ POLL (stmmac-0:1b) 
[    3.074931] eth%d: PHY ID 00000000 at 28 IRQ POLL (stmmac-0:1c) 
[    3.075453] eth%d: PHY ID 00000000 at 29 IRQ POLL (stmmac-0:1d) 
[    3.075983] eth%d: PHY ID 00000000 at 30 IRQ POLL (stmmac-0:1e) 
[    3.076504] eth%d: PHY ID 00000000 at 31 IRQ POLL (stmmac-0:1f) 
[    3.078391] usbcore: registered new interface driver rtl8192cu 
[    3.079050] usbcore: registered new interface driver rndis_wlan 
[    3.079839] usbcore: registered new interface driver mt7601u 
[    3.080394] Rockchip WiFi SYS interface (V1.00) ... 
[    3.080920] usbcore: registered new interface driver rtl8150 
[    3.081461] usbcore: registered new interface driver r8152 
[    3.082003] usbcore: registered new interface driver asix 
[    3.082513] usbcore: registered new interface driver ax88179_178a 
[    3.083103] usbcore: registered new interface driver cdc_ether 
[    3.083671] usbcore: registered new interface driver rndis_host 
[    3.084250] usbcore: registered new interface driver cdc_ncm 
[    3.084833] usbcore: registered new interface driver qmi_wwan 
[    3.085377] usbcore: registered new interface driver cdc_mbim 
[    3.087276] rockchip-dwc3 usb0: failed to get drvdata dwc3 
[    3.092007] rockchip-dwc3 usb1: fail to get drvdata hcd 
[    3.093678] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver 
[    3.094272] ehci-pci: EHCI PCI platform driver 
[    3.094731] ehci-platform: EHCI generic platform driver 
[    3.098683] ehci-platform fe3c0000.usb: EHCI Host Controller 
[    3.099347] ehci-platform fe3c0000.usb: new USB bus registered, assigned bus number 1 
[    3.100150] ehci-platform fe3c0000.usb: irq 30, io mem 0xfe3c0000 
[    3.106672] ehci-platform fe3c0000.usb: USB 2.0 started, EHCI 1.00 
[    3.107378] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 
[    3.108002] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 
[    3.108641] usb usb1: Product: EHCI Host Controller 
[    3.109084] usb usb1: Manufacturer: Linux 4.4.194+ ehci_hcd 
[    3.109584] usb usb1: SerialNumber: fe3c0000.usb 
[    3.110482] hub 1-0:1.0: USB hub found 
[    3.110860] hub 1-0:1.0: 1 port detected 
[    3.111756] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver 
[    3.112316] ohci-platform: OHCI generic platform driver 
[    3.113258] ohci-platform fe3e0000.usb: Generic Platform OHCI controller 
[    3.114031] ohci-platform fe3e0000.usb: new USB bus registered, assigned bus number 2 
[    3.114814] ohci-platform fe3e0000.usb: irq 31, io mem 0xfe3e0000 
[    3.169807] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 
[    3.170413] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 
[    3.171062] usb usb2: Product: Generic Platform OHCI controller 
[    3.171586] usb usb2: Manufacturer: Linux 4.4.194+ ohci_hcd 
[    3.172094] usb usb2: SerialNumber: fe3e0000.usb 
[    3.173001] hub 2-0:1.0: USB hub found 
[    3.173365] hub 2-0:1.0: 1 port detected 
[    3.174619] usbcore: registered new interface driver cdc_acm 
[    3.175134] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters 
[    3.175889] usbcore: registered new interface driver cdc_wdm 
[    3.176427] usbcore: registered new interface driver uas 
[    3.176989] usbcore: registered new interface driver usb-storage 
[    3.177594] usbcore: registered new interface driver usbserial 
[    3.178154] usbcore: registered new interface driver usbserial_generic 
[    3.178763] usbserial: USB Serial support registered for generic 
[    3.179332] usbcore: registered new interface driver ch341 
[    3.179852] usbserial: USB Serial support registered for ch341-uart 
[    3.180444] usbcore: registered new interface driver cp210x 
[    3.180972] usbserial: USB Serial support registered for cp210x 
[    3.181544] usbcore: registered new interface driver ftdi_sio 
[    3.182090] usbserial: USB Serial support registered for FTDI USB Serial Device 
[    3.182828] usbcore: registered new interface driver keyspan 
[    3.183348] usbserial: USB Serial support registered for Keyspan - (without firmware) 
[    3.184076] usbserial: USB Serial support registered for Keyspan 1 port adapter 
[    3.184754] usbserial: USB Serial support registered for Keyspan 2 port adapter 
[    3.185420] usbserial: USB Serial support registered for Keyspan 4 port adapter 
[    3.186114] usbcore: registered new interface driver option 
[    3.186636] usbserial: USB Serial support registered for GSM modem (1-port) 
[    3.187367] usbcore: registered new interface driver oti6858 
[    3.187899] usbserial: USB Serial support registered for oti6858 
[    3.188467] usbcore: registered new interface driver pl2303 
[    3.188996] usbserial: USB Serial support registered for pl2303 
[    3.189559] usbcore: registered new interface driver qcserial 
[    3.190102] usbserial: USB Serial support registered for Qualcomm USB modem 
[    3.190774] usbcore: registered new interface driver sierra 
[    3.191293] usbserial: USB Serial support registered for Sierra USB modem 
[    3.193093] usbcore: registered new interface driver usbtouchscreen 
[    3.193949] .. rk pwm remotectl v1.1 init 
[    3.194538] input: ff420030.pwm as /devices/platform/ff420030.pwm/input/input0 
[    3.195575] sensor_register_slave:mma8452,id=17 
[    3.196007] sensor_register_slave:lis3dh,id=7 
[    3.196398] sensor_register_slave:mma7660,id=18 
[    3.196818] sensor_register_slave:lsm303d,id=22 
[    3.197231] sensor_register_slave:gs_mc3230,id=23 
[    3.197656] [Gsensor]   gsensor_init 
[    3.197979] sensor_register_slave:mpu6880_acc,id=24 
[    3.198415] sensor_register_slave:mpu6500_acc,id=25 
[    3.198859] sensor_register_slave:lsm330_acc,id=26 
[    3.199295] sensor_register_slave:akm8975,id=30 
[    3.199715] sensor_register_slave:akm8963,id=31 
[    3.200128] sensor_register_slave:l3g4200d,id=45 
[    3.200540] sensor_register_slave:l3g20d,id=46 
[    3.200949] sensor_register_slave:ewtsa,id=47 
[    3.201340] sensor_register_slave:lsm330_gyro,id=51 
[    3.201785] sensor_register_slave:cm3217,id=53 
[    3.202186] sensor_register_slave:cm3218,id=54 
[    3.203066] i2c /dev entries driver 
[    3.204582] fan53555-regulator 0-0040: FAN53555 Option[8] Rev[1] Detected! 
[    3.205263] fan53555-reg: supplied by vcc5v0_sys 
[    3.207985] fan53555-regulator 0-0041: FAN53555 Option[8] Rev[1] Detected! 
[    3.208633] fan53555-reg: supplied by vcc3v3_sys 
[    3.212516] rk808 0-001b: Pmic Chip id: 0x0 
[    3.215932] rk808-regulator rk808-regulator: there is no dvs0 gpio 
[    3.216533] rk808-regulator rk808-regulator: there is no dvs1 gpio 
[    3.217181] DCDC_REG1: supplied by vcc5v0_sys 
[    3.218305] DCDC_REG2: supplied by vcc5v0_sys 
[    3.219278] DCDC_REG3: supplied by vcc5v0_sys 
[    3.219964] DCDC_REG4: supplied by vcc5v0_sys 
[    3.220821] LDO_REG1: supplied by vcc5v0_sys 
[    3.222316] LDO_REG2: supplied by vcc5v0_sys 
[    3.223711] LDO_REG3: supplied by vcc5v0_sys 
[    3.225077] LDO_REG4: supplied by vcc5v0_sys 
[    3.226445] LDO_REG5: supplied by vcc5v0_sys 
[    3.227846] LDO_REG6: supplied by vcc5v0_sys 
[    3.229215] LDO_REG7: supplied by vcc5v0_sys 
[    3.230574] LDO_REG8: supplied by vcc5v0_sys 
[    3.231962] SWITCH_REG1: supplied by vcc3v3_sys 
[    3.232683] SWITCH_REG2: supplied by vcc3v3_sys 
[    3.235941] rk808-rtc rk808-rtc: rtc core: registered rk808-rtc as rtc0 
[    3.237046] rk3x-i2c ff3c0000.i2c: Initialized RK3xxx I2C bus at ffffff80098dc000 
[    3.238350] rk3x-i2c ff110000.i2c: Initialized RK3xxx I2C bus at ffffff80098de000 
[    3.239481] rk3x-i2c ff120000.i2c: Initialized RK3xxx I2C bus at ffffff80098f2000 
[    3.241364] fusb302 4-0022: Can't get property of role, set role to default DRP 
[   11.539797] fusb302 4-0022: port 0 probe success with role ROLE_MODE_DRP, try_role ROLE_MODE_NONE 
[   11.540752] input: Typec_Headphone as /devices/platform/ff3d0000.i2c/i2c-4/4-0022/input/input1 
[   11.541787] rk3x-i2c ff3d0000.i2c: Initialized RK3xxx I2C bus at ffffff80098f4000 
[   11.544010] IR NEC protocol handler initialized 
[   11.545449] usbcore: registered new interface driver npu_acm 
[   11.546059] usbcore: registered new interface driver uvcvideo 
[   11.546570] USB Video Class driver (1.1.1) 
[   11.549509] Boot mode: normal 
[   11.551855] rk_tsadcv2_temp_to_code: Invalid conversion table: code=1023, temperature=2147483647 
[   11.552851] rockchip-thermal ff260000.tsadc: tsadc is probed successfully! 
[   11.554970] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com 
[   11.555981] rtk_btusb: Realtek Bluetooth USB driver ver 3.1.a2fd257.20190430-133301 
[   11.556684] rtk_btcoex: rtk_btcoex_init: version: 1.2 
[   11.557136] rtk_btcoex: create workqueue 
[   11.557486] rtk_btcoex: Coex over UDP 
[   11.558135] rtk_btcoex: alloc buffers 1792, 2432 for ev and l2 
[   11.558777] usbcore: registered new interface driver rtk_btusb 
[   11.559308] Bluetooth: Virtual HCI driver ver 1.5 
[   11.559931] Bluetooth: HCI UART driver ver 2.3 
[   11.560331] Bluetooth: HCI UART protocol H4 registered 
[   11.560802] Bluetooth: HCI UART protocol LL registered 
[   11.561256] Bluetooth: HCI UART protocol ATH3K registered 
[   11.561817] usbcore: registered new interface driver bfusb 
[   11.562377] usbcore: registered new interface driver btusb 
[   11.563585] cpu cpu0: bin=1 
[   11.563932] cpu cpu0: leakage=16 
[   11.576907] cpu cpu0: temp=21111, pvtm=142409 (144709 + -2300) 
[   11.577807] cpu cpu0: pvtm-volt-sel=0 
[   11.578209] cpu cpu0: bin-scale=34 
[   11.578952] cpu cpu4: bin=1 
[   11.579281] cpu cpu4: leakage=28 
[   11.591618] cpu cpu4: temp=21111, pvtm=150742 (152162 + -1420) 
[   11.592273] cpu cpu4: pvtm-volt-sel=1 
[   11.592704] cpu cpu4: bin-scale=17 
[   11.594597] cpu cpu0: avs=0 
[   11.595016] cpu cpu0: l=0 h=2147483647 hyst=5000 l_limit=0 h_limit=0 
[   11.596481] cpu cpu0: failed to find power_model node 
[   11.598318] cpu cpu5: avs=0 
[   11.598734] cpu cpu5: l=0 h=2147483647 hyst=5000 l_limit=0 h_limit=0 
[   11.601706] sdhci: Secure Digital Host Controller Interface driver 
[   11.602252] sdhci: Copyright(c) Pierre Ossman 
[   11.602670] Synopsys Designware Multimedia Card Interface Driver 
[   11.604497] dwmmc_rockchip fe310000.dwmmc: IDMAC supports 32-bit address mode. 
[   11.605184] dwmmc_rockchip fe310000.dwmmc: Using internal DMA controller. 
[   11.605811] dwmmc_rockchip fe310000.dwmmc: Version ID is 270a 
[   11.606368] dwmmc_rockchip fe310000.dwmmc: DW MMC controller at irq 25,32 bit host data width,256 deep fifo 
[   11.607253] dwmmc_rockchip fe310000.dwmmc: 'clock-freq-min-max' property was deprecated. 
[   11.608085] dwmmc_rockchip fe310000.dwmmc: No vmmc regulator found 
[   11.608632] dwmmc_rockchip fe310000.dwmmc: No vqmmc regulator found 
[   11.610444] dwmmc_rockchip fe320000.dwmmc: IDMAC supports 32-bit address mode. 
[   11.611122] dwmmc_rockchip fe320000.dwmmc: Using internal DMA controller. 
[   11.611747] dwmmc_rockchip fe320000.dwmmc: Version ID is 270a 
[   11.612302] dwmmc_rockchip fe320000.dwmmc: DW MMC controller at irq 26,32 bit host data width,256 deep fifo 
[   11.613186] dwmmc_rockchip fe320000.dwmmc: 'clock-freq-min-max' property was deprecated. 
[   11.614051] dwmmc_rockchip fe320000.dwmmc: No vmmc regulator found 
[   11.615604] sdhci-pltfm: SDHCI platform and OF driver helper 
[   11.618194] sdhci-arasan fe330000.sdhci: No vmmc regulator found 
[   11.618738] sdhci-arasan fe330000.sdhci: No vqmmc regulator found 
[   11.649246] mmc0: SDHCI controller on fe330000.sdhci [fe330000.sdhci] using ADMA 
[   11.651336] hidraw: raw HID events driver (C) Jiri Kosina 
[   11.652281] usbcore: registered new interface driver usbhid 
[   11.652950] usbhid: USB HID core driver 
[   11.653452] inv_mpu_iio: inv_mpu_init:746 
[   11.659544] usbcore: registered new interface driver snd-usb-audio 
[   11.662778] rt5640 1-001c: rt5640 have no io-channels defined 
[   11.663309] rt5640 1-001c: rt5640 have no aux_det_adc_value defined 
[   11.700337] mmc0: new HS400 Enhanced strobe MMC card at address 0001 
[   11.702757] mmcblk0: mmc0:0001 AJTD4R 14.6 GiB 
[   11.704281] mmcblk0boot0: mmc0:0001 AJTD4R partition 1 4.00 MiB 
[   11.705899] mmcblk0boot1: mmc0:0001 AJTD4R partition 2 4.00 MiB 
[   11.707419] mmcblk0rpmb: mmc0:0001 AJTD4R partition 3 4.00 MiB 
[   11.712474]  mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 
[   12.087588] rockchip-cdndp-sound dp-sound: ASoC: CODEC DAI spdif-hifi not registered 
[   12.088325] rockchip-cdndp-sound dp-sound: rockchip_sound_probe snd_soc_register_card fail -517 
[   12.089388] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) 
[   12.090840] IPVS: Registered protocols (TCP, UDP) 
[   12.091353] IPVS: Connection hash table configured (size=4096, memory=64Kbytes) 
[   12.092227] IPVS: Creating netns size=2104 id=0 
[   12.092703] IPVS: ipvs loaded. 
[   12.093008] IPVS: [rr] scheduler registered. 
[   12.093973] ip_tables: (C) 2000-2006 Netfilter Core Team 
[   12.094626] Initializing XFRM netlink socket 
[   12.096369] NET: Registered protocol family 10 
[   12.098283] NET: Registered protocol family 17 
[   12.098776] NET: Registered protocol family 15 
[   12.099201] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this. 
[   12.100338] Bridge firewalling registered 
[   12.100793] Bluetooth: RFCOMM socket layer initialized 
[   12.101264] Bluetooth: RFCOMM ver 1.11 
[   12.101612] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 
[   12.102153] Bluetooth: HIDP socket layer initialized 
[   12.102647] [WLAN_RFKILL]: Enter rfkill_wlan_init 
[   12.103370] [WLAN_RFKILL]: Enter rfkill_wlan_probe 
[   12.103861] [WLAN_RFKILL]: wlan_platdata_parse_dt: wifi_chip_type = ap6356s 
[   12.104475] [WLAN_RFKILL]: wlan_platdata_parse_dt: enable wifi power control. 
[   12.105110] [WLAN_RFKILL]: wlan_platdata_parse_dt: wifi power controled by gpio. 
[   12.105843] [WLAN_RFKILL]: wlan_platdata_parse_dt: get property: WIFI,host_wake_irq = 3, flags = 0. 
[   12.106641] [WLAN_RFKILL]: wlan_platdata_parse_dt: The ref_wifi_clk not found ! 
[   12.107298] [WLAN_RFKILL]: rfkill_wlan_probe: init gpio 
[   12.107773] [WLAN_RFKILL]: Exit rfkill_wlan_probe 
[   12.108238] [BT_RFKILL]: Enter rfkill_rk_init 
[   12.109002] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: uart_rts_gpios = 83. 
[   12.109771] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,reset_gpio = 9. 
[   12.110489] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,wake_gpio = 90. 
[   12.111217] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,wake_host_irq = 4. 
[   12.113082] [BT_RFKILL]: Request irq for bt wakeup host 
[   12.113787] [BT_RFKILL]: ** disable irq 
[   12.114452] [BT_RFKILL]: bt_default device registered. 
[   12.115120] Key type dns_resolver registered 
[   12.116243] sensor_register_slave:mpu6880_gyro,id=50 
[   12.119153] vendor storage:20190527 ret = 0 
[   12.120529] Registered cp15_barrier emulation handler 
[   12.121141] Registered setend emulation handler 
[   12.123722] Loading compiled-in X.509 certificates 
[   12.129271] Btrfs loaded 
[   12.131699] rga2: Driver loaded successfully ver:3.02 
[   12.132815] rga2: Module initialized. 
[   12.134449] phy phy-ff770000.syscon:usb2-phy@e450.7: Failed to get VBUS supply regulator 
[   12.138075] rockchip-drm display-subsystem: dmc is disabled 
[   12.139133] rockchip-vop ff900000.vop: missing rockchip,grf property 
[   12.140240] rockchip-drm display-subsystem: bound ff900000.vop (ops 0xffffff8008f040f0) 
[   12.141041] rockchip-vop ff8f0000.vop: missing rockchip,grf property 
[   12.141980] rockchip-drm display-subsystem: bound ff8f0000.vop (ops 0xffffff8008f040f0) 
[   12.143568] i2c i2c-9: of_i2c: modalias failure on /hdmi@ff940000/ports 
[   12.144239] dwhdmi-rockchip ff940000.hdmi: registered DesignWare HDMI I2C bus driver 
[   12.145142] dwhdmi-rockchip ff940000.hdmi: Detected HDMI TX controller v2.11a with HDCP (DWC HDMI 2.0 TX PHY) 
[   12.149733] rockchip-drm display-subsystem: bound ff940000.hdmi (ops 0xffffff8008ef8948) 
[   12.151542] i2c i2c-10: of_i2c: modalias failure on /dp@fec00000/ports 
[   12.153089] cdn-dp fec00000.dp: [drm:cdn_dp_pd_event_work] Not connected. Disabling cdn 
[   12.153986] rockchip-drm display-subsystem: bound fec00000.dp (ops 0xffffff8008ef9978) 
[   12.154711] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). 
[   12.155305] [drm] No driver support for vblank timestamp query. 
[   12.156400] rockchip-drm display-subsystem: connector[HDMI-A-1] can't found any modes 
[   12.157149] rockchip-drm display-subsystem: can't not find any loader display 
[   12.157828] rockchip-drm display-subsystem: failed to show loader logo 
[   12.158856] Freeing drm_logo memory: 1236K 
[   12.159254] rockchip-drm display-subsystem: No connectors reported connected with modes 
[   12.159993] [drm] Cannot find any crtc or sizes - going 1024x768 
[   12.181277] Console: switching to colour frame buffer device 128x48 
[   12.193269] rockchip-drm display-subsystem: fb0:  frame buffer device 
[   12.203609] mali ff9a0000.gpu: leakage=21 
[   12.216609] mali ff9a0000.gpu: temp=20555, pvtm=120249 (121215 + -966) 
[   12.218210] mali ff9a0000.gpu: pvtm-volt-sel=0 
[   12.219061] mali ff9a0000.gpu: avs=0 
[   12.220380] mali ff9a0000.gpu: GPU identified as 0x0860 r2p0 status 0 
[   12.221228] mali ff9a0000.gpu: Protected mode not available 
[   12.222279] mali ff9a0000.gpu: l=0 h=2147483647 hyst=5000 l_limit=0 h_limit=0 
[   12.222974] mali ff9a0000.gpu: Using configured power model mali-simple-power-model, and fallback mali-simple-power-model 
[   12.224060] I : [File] : drivers/gpu/arm/midgard/backend/gpu/mali_kbase_devfreq.c; [Line] : 423; [Func] : kbase_devfreq_init(); success initing power_model_simple. 
[   12.226109] mali ff9a0000.gpu: Probed as mali0 
[   12.231181] xhci-hcd xhci-hcd.8.auto: xHCI Host Controller 
[   12.231932] xhci-hcd xhci-hcd.8.auto: new USB bus registered, assigned bus number 3 
[   12.232742] xhci-hcd xhci-hcd.8.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x06030010 
[   12.233545] xhci-hcd xhci-hcd.8.auto: irq 228, io mem 0xfe800000 
[   12.234312] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 
[   12.234921] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 
[   12.235563] usb usb3: Product: xHCI Host Controller 
[   12.236013] usb usb3: Manufacturer: Linux 4.4.194+ xhci-hcd 
[   12.236508] usb usb3: SerialNumber: xhci-hcd.8.auto 
[   12.237467] hub 3-0:1.0: USB hub found 
[   12.237838] hub 3-0:1.0: 1 port detected 
[   12.238458] xhci-hcd xhci-hcd.8.auto: xHCI Host Controller 
[   12.239095] xhci-hcd xhci-hcd.8.auto: new USB bus registered, assigned bus number 4 
[   12.239835] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. 
[   12.240631] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003 
[   12.241239] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 
[   12.241907] usb usb4: Product: xHCI Host Controller 
[   12.242354] usb usb4: Manufacturer: Linux 4.4.194+ xhci-hcd 
[   12.242880] usb usb4: SerialNumber: xhci-hcd.8.auto 
[   12.243869] hub 4-0:1.0: USB hub found 
[   12.244228] hub 4-0:1.0: 1 port detected 
[   12.245899] xhci-hcd xhci-hcd.8.auto: remove, state 1 
[   12.246372] usb usb4: USB disconnect, device number 1 
[   12.250806] xhci-hcd xhci-hcd.9.auto: xHCI Host Controller 
[   12.263352] xhci-hcd xhci-hcd.8.auto: Host not halted after 16000 microseconds. 
[   12.263995] xhci-hcd xhci-hcd.8.auto: Host controller not halted, aborting reset. 
[   12.264708] xhci-hcd xhci-hcd.8.auto: USB bus 4 deregistered 
[   12.265412] xhci-hcd xhci-hcd.8.auto: remove, state 1 
[   12.265415] xhci-hcd xhci-hcd.9.auto: new USB bus registered, assigned bus number 5 
[   12.265554] xhci-hcd xhci-hcd.9.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x06030010 
[   12.265596] xhci-hcd xhci-hcd.9.auto: irq 229, io mem 0xfe900000 
[   12.265816] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002 
[   12.265821] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 
[   12.265826] usb usb5: Product: xHCI Host Controller 
[   12.265830] usb usb5: Manufacturer: Linux 4.4.194+ xhci-hcd 
[   12.265833] usb usb5: SerialNumber: xhci-hcd.9.auto 
[   12.270753] hub 5-0:1.0: USB hub found 
[   12.271118] hub 5-0:1.0: 1 port detected 
[   12.271755] usb usb3: USB disconnect, device number 1 
[   12.271757] xhci-hcd xhci-hcd.9.auto: xHCI Host Controller 
[   12.273309] xhci-hcd xhci-hcd.8.auto: USB bus 3 deregistered 
[   12.273345] xhci-hcd xhci-hcd.9.auto: new USB bus registered, assigned bus number 4 
[   12.273408] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. 
[   12.273499] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003 
[   12.273504] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 
[   12.273508] usb usb4: Product: xHCI Host Controller 
[   12.273512] usb usb4: Manufacturer: Linux 4.4.194+ xhci-hcd 
[   12.273516] usb usb4: SerialNumber: xhci-hcd.9.auto 
[   12.278113] hub 4-0:1.0: USB hub found 
[   12.278474] hub 4-0:1.0: 1 port detected 
[   12.283381] ehci-platform fe380000.usb: EHCI Host Controller 
[   12.284136] ehci-platform fe380000.usb: new USB bus registered, assigned bus number 3 
[   12.284978] ehci-platform fe380000.usb: irq 28, io mem 0xfe380000 
[   12.290732] ehci-platform fe380000.usb: USB 2.0 started, EHCI 1.00 
[   12.291472] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 
[   12.292086] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 
[   12.292741] usb usb3: Product: EHCI Host Controller 
[   12.293182] usb usb3: Manufacturer: Linux 4.4.194+ ehci_hcd 
[   12.293687] usb usb3: SerialNumber: fe380000.usb 
[   12.294750] hub 3-0:1.0: USB hub found 
[   12.295114] hub 3-0:1.0: 1 port detected 
[   12.296425] ohci-platform fe3a0000.usb: Generic Platform OHCI controller 
[   12.297245] ohci-platform fe3a0000.usb: new USB bus registered, assigned bus number 6 
[   12.298059] ohci-platform fe3a0000.usb: irq 29, io mem 0xfe3a0000 
[   12.352900] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 
[   12.353503] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 
[   12.354160] usb usb6: Product: Generic Platform OHCI controller 
[   12.354701] usb usb6: Manufacturer: Linux 4.4.194+ ohci_hcd 
[   12.355198] usb usb6: SerialNumber: fe3a0000.usb 
[   12.356198] hub 6-0:1.0: USB hub found 
[   12.356562] hub 6-0:1.0: 1 port detected 
[   12.359526] dwmmc_rockchip fe310000.dwmmc: IDMAC supports 32-bit address mode. 
[   12.360224] dwmmc_rockchip fe310000.dwmmc: Using internal DMA controller. 
[   12.360841] dwmmc_rockchip fe310000.dwmmc: Version ID is 270a 
[   12.361372] dwmmc_rockchip fe310000.dwmmc: DW MMC controller at irq 25,32 bit host data width,256 deep fifo 
[   12.362256] dwmmc_rockchip fe310000.dwmmc: 'clock-freq-min-max' property was deprecated. 
[   12.363066] dwmmc_rockchip fe310000.dwmmc: No vmmc regulator found 
[   12.363618] dwmmc_rockchip fe310000.dwmmc: No vqmmc regulator found 
[   12.364569] dwmmc_rockchip fe310000.dwmmc: allocated mmc-pwrseq 
[   12.378062] mmc_host mmc1: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0) 
[   12.391817] dwmmc_rockchip fe310000.dwmmc: 1 slots initialized 
[   12.394300] dwmmc_rockchip fe320000.dwmmc: IDMAC supports 32-bit address mode. 
[   12.395027] dwmmc_rockchip fe320000.dwmmc: Using internal DMA controller. 
[   12.395685] dwmmc_rockchip fe320000.dwmmc: Version ID is 270a 
[   12.396262] dwmmc_rockchip fe320000.dwmmc: DW MMC controller at irq 26,32 bit host data width,256 deep fifo 
[   12.397208] dwmmc_rockchip fe320000.dwmmc: 'clock-freq-min-max' property was deprecated. 
[   12.398148] dwmmc_rockchip fe320000.dwmmc: No vmmc regulator found 
[   12.399470] dwmmc_rockchip fe320000.dwmmc: allocated mmc-pwrseq 
[   12.400362] rockchip-iodomain ff770000.syscon:io-domains: Setting to 3300000 done 
[   12.401702] rockchip-iodomain ff770000.syscon:io-domains: Setting to 3300000 done 
[   12.415011] mmc_host mmc2: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0) 
[   12.419613] mmc_host mmc1: Bus speed (slot 0) = 300000Hz (slot req 300000Hz, actual 300000HZ div = 0) 
[   12.428744] dwmmc_rockchip fe320000.dwmmc: 1 slots initialized 
[   12.430201] rt5640 1-001c: rt5640 have no io-channels defined 
[   12.430774] rt5640 1-001c: rt5640 have no aux_det_adc_value defined 
[   12.461144] mmc_host mmc1: Bus speed (slot 0) = 200000Hz (slot req 200000Hz, actual 200000HZ div = 0) 
[   13.102382] asoc-simple-card hdmi-sound: i2s-hifi <-> ff8a0000.i2s mapping ok 
[   13.107234] rockchip-i2s ff8a0000.i2s: Trying to bind component to card "rk-hdmi-dp-sound" but is already bound to card "rockchip,hdmi" 
[   13.108370] rk-hdmi-dp-sound hdmi-dp-sound: ASoC: failed to instantiate card -19 
[   13.109158] rk-hdmi-dp-sound hdmi-dp-sound: card register failed -19 
[   13.111526] rockchip-cdndp-sound dp-sound: spdif-hifi <-> ff870000.spdif mapping ok 
[   13.112311] hdmi-audio-codec hdmi-audio-codec.7.auto: ASoC: Failed to create Playback debugfs file 
[   13.114933] input: rockchip-cdndp-sound DP Jack as /devices/platform/dp-sound/sound/card1/input2 
[   13.117381] rt5640 1-001c: rt5640 have no io-channels defined 
[   13.117961] rt5640 1-001c: rt5640 have no aux_det_adc_value defined 
[   13.788437] dhd_module_init: in Dongle Host Driver, version 1.579.77.41.10 (r) 
[   13.788441] 
[   13.788457] ======================================================= 
[   13.788461] ==== Launching Wi-Fi driver! (Powered by Rockchip) ==== 
[   13.788464] ======================================================= 
[   13.788468] Realtek 8723DU USB WiFi driver (Powered by Rockchip) init. 
[   13.788476] [WLAN_RFKILL]: rockchip_wifi_power: 1 
[   13.788482] [WLAN_RFKILL]: wifi turn on power. -1 
[   13.788486] RTW: module init start 
[   13.788492] RTW: rtl8723du v5.6.5.1_34252.20190703_COEX20181130-2e2e 
[   13.788497] RTW: build time: Dec  3 2021 01:29:36 
[   13.788501] RTW: rtl8723du BT-Coex version = COEX20181130-2e2e 
[   13.788820] usbcore: registered new interface driver rtl8723du 
[   13.788826] RTW: module init ret=0 
[   13.790507] input: gpio-keys as /devices/platform/gpio-keys/input/input3 
[   13.791304] ==gsl_ts_init== 
[   13.791427] ret=0 
[   13.793318] rk808-rtc rk808-rtc: setting system clock to 2013-01-18 08:50:18 UTC (1358499018) 
[   13.796907] ======== dhd_wlan_init_plat_data ======== 
[   13.797365] [WLAN_RFKILL]: rockchip_wifi_get_oob_irq: Enter 
[   13.797892] dhd_wlan_init_gpio: WL_HOST_WAKE=-1, oob_irq=69, oob_irq_flags=0x414 
[   13.798550] dhd_wlan_init_gpio: WL_REG_ON=-1 
[   13.798948] dhd_wifi_platform_load: Enter 
[   13.799341] Power-up adapter 'DHD generic adapter' 
[   13.799861] wifi_platform_set_power = 1 
[   13.800211] ======== PULL WL_REG_ON(-1) HIGH! ======== 
[   13.800697] [WLAN_RFKILL]: rockchip_wifi_power: 1 
[   13.801129] [WLAN_RFKILL]: wifi turn on power. -1 
[   13.807819] rt5640 1-001c: rt5640 have no io-channels defined 
[   13.808346] rt5640 1-001c: rt5640 have no aux_det_adc_value defined 
u▒  13.826441] 
 
 
 |   
 
 
 
 |