有没有openpose的demo?

显示全部楼层 · 发表于 2019-3-5 21:00:13

程子发表于 2019-3-5 19:18
版权问题是Ubuntu。。。

能给个教程就好了。只能跑三个样例有啥用。

显示全部楼层 · 发表于 2019-3-6 09:41:13

kitedream 发表于 2019-3-5 21:00
能给个教程就好了。只能跑三个样例有啥用。

我们还是希望能抛砖引玉，教会大家如何用起来，总不能市面上出一个模型我们就出一个demo吧。

显示全部楼层 · 发表于 2019-3-6 11:02:44

本帖最后由 kitedream 于 2019-3-6 11:07 编辑

jefferyzhang 发表于 2019-3-6 09:41
我们还是希望能抛砖引玉，教会大家如何用起来，总不能市面上出一个模型我们就出一个demo吧。 ...

谢谢回复，其实我想说的是，rknn的相关使用说明文档比较缺乏啊，目前还不太容易指导我们对一些模型进行改造

显示全部楼层 · 发表于 2019-3-6 11:13:27

本帖最后由 jefferyzhang 于 2019-3-7 09:46 编辑

kitedream 发表于 2019-3-6 11:02
谢谢回复，其实我想说的是，rknn的相关使用说明文档比较缺乏啊，目前还不太容易指导我们对一些 ...

转换时候有问题就来论坛问问吧，目前正在为1.0版本发布而努力。关注论坛和wiki，我们会不断更新

显示全部楼层 · 发表于 2019-3-14 11:17:36

本帖最后由 kitedream 于 2019-3-14 17:05 编辑

不好意思，自己搞错了。

显示全部楼层 · 发表于 2019-3-14 15:37:06

kitedream 发表于 2019-3-14 11:17
你好，我在尝试调用 openpose caffe 版本 coco数据集的模型，模型加载和build rknn 过程中没有出现问题， ...

请使命@ 回你那篇帖子的人，那人是大牛。。。

显示全部楼层 · 发表于 2021-2-26 02:36:19

本帖最后由 Lubagov 于 2021-2-26 06:54 编辑

Hello! A couple of days ago I became the owner of the Asus Tinker EDGE R.

I'm interested in the example of OpenPose, I pulled it out of the Android firmware on FireFlay. And it works well ...

Its source has remained closed?
There is no information about how the model was converted, and what was its source?

It seems this is not the original model. Though, if only because there are no dots on the ears ... I found a post, http://t.rock-chips.com/forum.php?mod=viewthread&tid=469&highlight=openpose
but this seems to be a different model.

And another question, perhaps stupid.

D / RKNNAPI: ============================================
RKNN VERSION:
   API: 1.4.0 (bbe0dfc build: 2020-09-14 14:06:12)
   DRV: 1.3.2 (f113d64 build: 2020-04-23 09:35:26)
===============================================

This is what I see from the SSD example, I built it from source, it works. The driver version is quite old. The Android kernel is built with no modules. I would like to update, but so far I do not understand how. And it seems ASUS did not open its sources, and this is generally sad.
----

I fouund https://github.com/rockchip-linux/rknpu-fw/tree/master/npu_fw this repo, seems here version 1.4, and found tools in /vendeor/bin, execute this:
`/vendor/bin/npu_upgrade MiniLoaderAll.bin uboot.img trust.img boot.img`
and NPU stop working...
`
E/RKNNAPI: rknn_init,  recv(MsgLoadAck) fail, -9(ERROR_PIPE) != 368!
E/rkssd4j: rknn_init fail! ret=-3
`
nex i found `/vendor/etc/npu_fw`, execute same command, and NPU start working...
so... How i can understand, i need replace some files in /vendeor.img to newer version and flash it to device, for have in my asus new NPU firmware/driver?