rk3399pro自己编译固件及求最新文档资料

hello，我想自己编译出固件烧录到rk3399pro开发板上。遇到了一下几个疑惑：
1、我参考的是贵公司github的docs的文档。repo到的代码缺少buildroot目录，与文档描述不一致。
├── Android.bp -> build/soong/root.bp
├── art
├── bionic
├── bootable
├── bootstrap.bash -> build/soong/bootstrap.bash
├── build
├── build.sh
├── buildspec.mk
├── compatibility
├── cts
├── dalvik
├── developers
├── development
├── device
├── docs
├── external
├── frameworks
├── hardware
├── javaenv.sh
├── kernel
├── libcore
├── libnativehelper
├── Makefile
├── mkimage.sh
├── packages
├── pdk
├── platform_testing
├── prebuilts
├── rkbin
├── RKDocs
├── RKNPUTools
├── rkst
├── RKTools
├── sdk
├── system
├── test
├── toolchain
├── tools
├── u-boot
└── vendor开发板

2、分别编译的uboot.img与boot.img，然后烧录到开发板也不能正常启动，错误信息如下：
U-Boot 2017.09-g5f96523 (May 27 2019 - 16:24:44 +0800)

Model: Rockchip RK3399 Evaluation Board
DRAM:  2 GiB
Relocation Offset is: 7dbf5000
Sysmem: init
Using default environment

dwmmc@fe320000: 1, sdhci@fe330000: 0
Card did not respond to voltage select!
mmc_init: -95, time 9
switch to partitions #0, OK
mmc0(part 0) is current device
Bootdev: mmc 0
PartType: EFI
get part misc fail -1
boot mode: None
init_resource_list: failed to get boot part, ret=-1
init_resource_list: failed to get resource part, ret=-1
init_kernel_dtb dtb in resource read fail
Can't find UCLASS_IO_DOMAIN driver -19
Model: Rockchip RK3399 Evaluation Board
CLK: (uboot. arml: enter 816000 KHz, init 816000 KHz, kernel 0N/A)
CLK: (uboot. armb: enter 24000 KHz, init 24000 KHz, kernel 0N/A)
  aplll 816000 KHz
  apllb 24000 KHz
  dpll 800000 KHz
  cpll 24000 KHz
  gpll 800000 KHz
  npll 600000 KHz
  vpll 24000 KHz
  aclk_perihp 133333 KHz
  hclk_perihp 66666 KHz
  pclk_perihp 33333 KHz
  aclk_perilp0 266666 KHz
  hclk_perilp0 88888 KHz
  pclk_perilp0 44444 KHz
  hclk_perilp1 100000 KHz
  pclk_perilp1 50000 KHz
Net:   No ethernet found.
Hit key to stop autoboot('CTRL+C'):  0
Could not find misc partition
ANDROID: reboot reason: "(none)"
load_android_image: Can't find part: boot
Android boot failed, error -1.
=Booting Rockchip format image=
boot_rockchip_image kernel or boot part info error
Card did not respond to voltage select!
mmc_init: -95, time 9
switch to partitions #0, OK
mmc0(part 0) is current device
Failed to mount ext2 filesystem...
** Unrecognized filesystem type **
starting USB...
USB0:   Register 2000140 NbrPorts 2
Starting the controller
USB XHCI 1.10
USB1:   Register 2000140 NbrPorts 2
Starting the controller
USB XHCI 1.10
scanning bus 0 for devices... 1 USB Device(s) found
scanning bus 1 for devices... 1 USB Device(s) found
       scanning usb for storage devices... 0 Storage Device(s) found

Device 0: unknown device
No ethernet found.
missing environment variable: pxeuuid
missing environment variable: bootfile
Retrieving file: pxelinux.cfg/00000000
No ethernet found.
missing environment variable: bootfile
Retrieving file: pxelinux.cfg/0000000
No ethernet found.

3、请问一下哪个地方有正确的、最新的文档和代码我可以使用呢，谢谢。

请参考wiki编译说明：http://t.rock-chips.com/wiki.php?mod=view&id=34

jefferyzhang 发表于 2019-5-28 14:18
请参考wiki编译说明：http://t.rock-chips.com/wiki.php?mod=view&id=34

你好，谢谢回复。wiki里面的介绍太少了。我现在想自己走一遍编译linux的流程。现在编译uboot.img和boot_linux.img可以了。请问你们有提供的rootfs的编译源码吗？没有看到相关的文档,github上的文档很久没有更新了，看来是不能参考了。
附编译uboot.img启动正常：cd u-boot;./make.sh evb-rk3399
附编译boot_linux.img启动正常：：cd kernel;./make.sh linux prod

xiangbingj 发表于 2019-5-28 17:26
你好，谢谢回复。wiki里面的介绍太少了。我现在想自己走一遍编译linux的流程。现在编译uboot.img和boot_l ...

我们自测过github代码编译的固件烧入toybrick是可以起来的。
linux没有源码，是fedora官方下载的，就只有rootfs，发行版linux不可能提供源码，需要源码可以自行用buildroot来编译。