单板串口打印如下错误会是哪些原因导致？

[    3.055933] usb 1-1: New USB device found, idVendor=05e3, idProduct=0610
[    3.064016] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    3.072018] usb 1-1: Product: USB2.0 Hub
[    3.079699] usb 1-1: Manufacturer: GenesysLogic
[    3.103587] RTW: rtw_regsty_chk_target_tx_power_valid return _FALSE for band:0, path:0, rs:0, t:-1
[    3.110273] RTW: rtw_ndev_init(wlan0) if1 mac_addr=20:32:33:00:e1:4c
[    3.117142] RTW: rtw_ndev_init(p2p0) if2 mac_addr=22:32:33:00:e1:4c
[    3.117763] hub 1-1:1.0: USB hub found
[    3.118754] hub 1-1:1.0: 4 ports detected
[    3.158251] Waiting for root device PARTUUID=614e0000-0000-4b53-8000-1d28000054a9...
[    4.671799] usb 1-1-port2: Cannot enable. Maybe the USB cable is bad?
[    4.686966] cdn-dp fec00000.dp: Direct firmware load for rockchip/dptx.bin failed with error -2
[    8.697962] cdn-dp fec00000.dp: Direct firmware load for rockchip/dptx.bin failed with error -2
[   16.121718] random: nonblocking pool is initialized
[   16.708961] cdn-dp fec00000.dp: Direct firmware load for rockchip/dptx.bin failed with error -2
[   32.719957] cdn-dp fec00000.dp: Direct firmware load for rockchip/dptx.bin failed with error -2
[   64.730960] cdn-dp fec00000.dp: Direct firmware load for rockchip/dptx.bin failed with error -2

你这个是Android系统还是Linux系统？

我是流氓我怕谁 发表于 2019-2-13 09:59
你这个是Android系统还是Linux系统？

images-tb-rk3399prod-v1.0.tar.gz   烧录的是这个压缩包。
目前还没有详细了解板子情况，所以还是有些模糊。
请明确指点一下，谢谢

我是流氓我怕谁 发表于 2019-2-13 09:59
你这个是Android系统还是Linux系统？

感谢了，回家重新烧录了一次，linux可以登陆进去了。