rk3588死机花屏

官方你好，可以帮我分析一下dmesg，rk3588系统崩溃的原因吗？谢谢了，rk3588运行程序三个多小时之后，rk3588会出现死机，其中完整的dmesg
[    0.788111] Booting Linux on physical CPU 0x0000000000 [0x412fd050]
[    0.788129] Linux version 5.10.66-gb362deeea7a7-dirty (lth@lth-HP-Laptop-14s-dr5xxx) (Android (7284624, based on r416183b) clang version 12.0.5 (https://android.googlesource.com/toolchain/llvm-project c935d99d7cf2016289302412d708641d52d2f7ee), LLD 12.0.5 (/buildbot/src/android/llvm-toolchain/out/llvm-project/lld c935d99d7cf2016289302412d708641d52d2f7ee)) #188 SMP Fri Dec 8 11:39:06 CST 2023
[    0.796604] Machine model: Rockchip RK3588 TOYBRICK X10 Board
[    0.796629] earlycon: uart8250 at MMIO32 0x00000000feb50000 (options '')
[    0.801407] printk: bootconsole [uart8250] enabled
[    0.806518] OF: fdt: Reserved memory: failed to reserve memory for node 'drm-logo@00000000': base 0x0000000000000000, size 0 MiB
[    0.807566] OF: fdt: Reserved memory: failed to reserve memory for node 'drm-cubic-lut@00000000': base 0x0000000000000000, size 0 MiB
[    0.808682] Reserved memory: created CMA memory pool at 0x0000000010000000, size 256 MiB
[    0.809407] OF: reserved mem: initialized node cma, compatible id shared-dma-pool
[    0.917580] Zone ranges:
[    0.917821]   DMA      [mem 0x0000000000200000-0x00000000ffffffff]
[    0.918385]   DMA32    empty
[    0.918644]   Normal   [mem 0x0000000100000000-0x00000002ffffffff]
[    0.919199] Movable zone start for each node
[    0.919586] Early memory node ranges
[    0.919911]   node   0: [mem 0x0000000000200000-0x00000000083fffff]
[    0.920475]   node   0: [mem 0x0000000009400000-0x00000000efffffff]
[    0.921038]   node   0: [mem 0x0000000100000000-0x00000001ffffffff]
[    0.921604]   node   0: [mem 0x00000002f0000000-0x00000002ffffffff]
[    0.922172] Initmem setup node 0 [mem 0x0000000000200000-0x00000002ffffffff]
[    0.922808] On node 0 totalpages: 2092544
[    0.922813]   DMA zone: 15288 pages used for memmap
[    0.922816]   DMA zone: 0 pages reserved
[    0.922820]   DMA zone: 978432 pages, LIFO batch:63
[    0.922824]   Normal zone: 17408 pages used for memmap
[    0.922827]   Normal zone: 1114112 pages, LIFO batch:63
[    0.965849] psci: probing for conduit method from DT.
[    0.966315] psci: PSCIv1.1 detected in firmware.
[    0.966729] psci: Using standard PSCI v0.2 function IDs
[    0.967201] psci: Trusted OS migration not required
[    0.967643] psci: SMC Calling Convention v1.2
[    0.968349] percpu: Embedded 30 pages/cpu s85416 r8192 d29272 u122880
[    0.968965] pcpu-alloc: s85416 r8192 d29272 u122880 alloc=30*4096
[    0.968970] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7
[    0.969090] Detected VIPT I-cache on CPU0
[    0.969476] CPU features: detected: GIC system register CPU interface
[    0.970056] CPU features: detected: Virtualization Host Extensions
[    0.970616] CPU features: detected: ARM errata 1165522, 1319367, or 1530923
[    0.971249] alternatives: patching kernel code
[    0.973286] Built 1 zonelists, mobility grouping on.  Total pages: 2059848
[    0.973906] Kernel command line: earlycon=uart8250,mmio32,0xfeb50000 root=PARTUUID=614e0000-0000 rw rootwait rootfstype=ext4 console=ttyFIQ0 irqchip.gicv3_pseudo_nmi=0
[    0.976101] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[    0.977155] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[    0.977862] mem auto-init: stackff, heap allocff, heap freeff
[    0.983700] software IO TLB: mapped [mem 0x00000000ec000000-0x00000000f0000000] (64MB)
[    1.038815] Memory: 7812248K/8370176K available (17406K kernel code, 3320K rwdata, 8608K rodata, 1600K init, 569K bss, 295784K reserved, 262144K cma-reserved)
[    1.040202] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[    1.040817] ftrace: allocating 59311 entries in 232 pages
[    1.120260] ftrace: allocated 232 pages with 4 groups
[    1.120937] rcu: Hierarchical RCU implementation.
[    1.121364] rcu:         RCU event tracing is enabled.
[    1.121771]         Rude variant of Tasks RCU enabled.
[    1.122176] rcu: RCU calculated value of scheduler-enlistment delay is 30 jiffies.
[    1.126779] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[    1.129070] GICv3: GIC: Using split EOI/Deactivate mode
[    1.129545] GICv3: 480 SPIs implemented
[    1.129892] GICv3: 0 Extended SPIs implemented
[    1.130313] GICv3: Distributor has no Range Selector support
[    1.130830] GICv3: 16 PPIs implemented
[    1.131209] GICv3: CPU0: found redistributor 0 region 0:0x00000000fe680000
[    1.131918] ITS [mem 0xfe640000-0xfe65ffff]
[    1.132335] ITS@0x00000000fe640000: allocated 8192 Devices @1001f0000 (indirect, esz 8, psz 64K, shr 0)
[    1.133198] ITS@0x00000000fe640000: allocated 32768 Interrupt Collections @100200000 (flat, esz 2, psz 64K, shr 0)
[    1.134131] ITS: using cache flushing for cmd queue
[    1.134592] ITS [mem 0xfe660000-0xfe67ffff]
[    1.135000] ITS@0x00000000fe660000: allocated 8192 Devices @100220000 (indirect, esz 8, psz 64K, shr 0)
[    1.135854] ITS@0x00000000fe660000: allocated 32768 Interrupt Collections @100230000 (flat, esz 2, psz 64K, shr 0)
[    1.136786] ITS: using cache flushing for cmd queue
[    1.137348] GICv3: using LPI property table @0x0000000100240000
[    1.137974] GIC: using cache flushing for LPI property table
[    1.138486] GICv3: CPU0: using allocated LPI pending table @0x0000000100250000
[    1.139255] random: get_random_bytes called from start_kernel+0x250/0x4f4 with crng_init=0
[    1.245842] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
[    1.247157] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[    1.248146] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[    1.249727] Console: colour dummy device 80x25
[    1.250159] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=80000)
[    1.251101] pid_max: default: 32768 minimum: 301
[    1.251630] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    1.252339] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    1.254258] rcu: Hierarchical SRCU implementation.
[    1.255325] Platform MSI: msi-controller@fe640000 domain created
[    1.255886] Platform MSI: msi-controller@fe660000 domain created
[    1.256695] PCI/MSI: /interrupt-controller@fe600000/msi-controller@fe640000 domain created
[    1.257462] PCI/MSI: /interrupt-controller@fe600000/msi-controller@fe660000 domain created
[    1.258557] smp: Bringing up secondary CPUs ...
[    1.260052] Detected VIPT I-cache on CPU1
[    1.260074] GICv3: CPU1: found redistributor 100 region 0:0x00000000fe6a0000
[    1.260088] GICv3: CPU1: using allocated LPI pending table @0x0000000100260000
[    1.260125] CPU1: Booted secondary processor 0x0000000100 [0x412fd050]
[    1.261246] Detected VIPT I-cache on CPU2
[    1.261263] GICv3: CPU2: found redistributor 200 region 0:0x00000000fe6c0000
[    1.261276] GICv3: CPU2: using allocated LPI pending table @0x0000000100270000
[    1.261309] CPU2: Booted secondary processor 0x0000000200 [0x412fd050]
[    1.262399] Detected VIPT I-cache on CPU3
[    1.262414] GICv3: CPU3: found redistributor 300 region 0:0x00000000fe6e0000
[    1.262427] GICv3: CPU3: using allocated LPI pending table @0x0000000100280000
[    1.262458] CPU3: Booted secondary processor 0x0000000300 [0x412fd050]
[    1.263543] CPU features: detected: Spectre-v4
[    1.263546] Detected PIPT I-cache on CPU4
[    1.263554] GICv3: CPU4: found redistributor 400 region 0:0x00000000fe700000
[    1.263560] GICv3: CPU4: using allocated LPI pending table @0x0000000100290000
[    1.263580] CPU4: Booted secondary processor 0x0000000400 [0x414fd0b0]
[    1.264633] Detected PIPT I-cache on CPU5
[    1.264642] GICv3: CPU5: found redistributor 500 region 0:0x00000000fe720000
[    1.264648] GICv3: CPU5: using allocated LPI pending table @0x00000001002a0000
[    1.264668] CPU5: Booted secondary processor 0x0000000500 [0x414fd0b0]
[    1.265731] Detected PIPT I-cache on CPU6
[    1.265739] GICv3: CPU6: found redistributor 600 region 0:0x00000000fe740000
[    1.265746] GICv3: CPU6: using allocated LPI pending table @0x00000001002b0000
[    1.265766] CPU6: Booted secondary processor 0x0000000600 [0x414fd0b0]
[    1.266805] Detected PIPT I-cache on CPU7
[    1.266814] GICv3: CPU7: found redistributor 700 region 0:0x00000000fe760000
[    1.266820] GICv3: CPU7: using allocated LPI pending table @0x00000001002c0000
[    1.266839] CPU7: Booted secondary processor 0x0000000700 [0x414fd0b0]
[    1.266883] smp: Brought up 1 node, 8 CPUs
[    1.283501] SMP: Total of 8 processors activated.
[    1.283933] CPU features: detected: Privileged Access Never
[    1.284448] CPU features: detected: User Access Override
[    1.284935] CPU features: detected: 32-bit EL0 Support
[    1.285405] CPU features: detected: Common not Private translations
[    1.285978] CPU features: detected: RAS Extension Support
[    1.286472] CPU features: detected: Data cache clean to the PoU not required for I/D coherence
[    1.287259] CPU features: detected: CRC32 instructions
[    1.287730] CPU features: detected: Speculative Store Bypassing Safe (SSBS)
[    1.288374] CPU features: detected: RCpc load-acquire (LDAPR)
[    1.288963] CPU: All CPU(s) started at EL2
[    1.290539] devtmpfs: initialized
[    1.296439] Registered cp15_barrier emulation handler
[    1.296903] Registered setend emulation handler
[    1.297368] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[    1.298255] futex hash table entries: 2048 (order: 5, 131072 bytes, linear)
[    1.300450] pinctrl core: initialized pinctrl subsystem
[    1.301019] regulator-dummy: no parameters, enabled
[    1.301185] NET: Registered protocol family 16
[    1.302090] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations
[    1.302816] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[    1.303845] thermal_sys: Registered thermal governor 'fair_share'
[    1.303847] thermal_sys: Registered thermal governor 'step_wise'
[    1.304406] thermal_sys: Registered thermal governor 'user_space'
[    1.304951] thermal_sys: Registered thermal governor 'power_allocator'
[    1.305584] thermal thermal_zone1: power_allocator: sustainable_power will be estimated
[    1.306918] thermal thermal_zone2: power_allocator: sustainable_power will be estimated
[    1.307659] thermal thermal_zone3: power_allocator: sustainable_power will be estimated
[    1.308404] thermal thermal_zone4: power_allocator: sustainable_power will be estimated
[    1.309145] thermal thermal_zone5: power_allocator: sustainable_power will be estimated
[    1.309887] thermal thermal_zone6: power_allocator: sustainable_power will be estimated
[    1.310623] cpuidle: using governor menu
[    1.310982] Registered FIQ tty driver
[    1.311391] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[    1.312082] ASID allocator initialised with 65536 entries
[    1.313680] printk: console [ramoops-1] enabled
[    1.314092] pstore: Registered ramoops as persistent store backend
[    1.314654] ramoops: using 0xf0000@0x110000, ecc: 0
[    1.343371] rockchip-gpio fd8a0000.gpio: probed /pinctrl/gpio@fd8a0000
[    1.344093] rockchip-gpio fec20000.gpio: probed /pinctrl/gpio@fec20000
[    1.344792] rockchip-gpio fec30000.gpio: probed /pinctrl/gpio@fec30000
[    1.345506] rockchip-gpio fec40000.gpio: probed /pinctrl/gpio@fec40000
[    1.346248] rockchip-gpio fec50000.gpio: probed /pinctrl/gpio@fec50000
[    1.346856] rockchip-pinctrl pinctrl: probed pinctrl
[    1.354626] fiq_debugger fiq_debugger.0: IRQ fiq not found
[    1.355128] fiq_debugger fiq_debugger.0: IRQ wakeup not found
[    1.355656] fiq_debugger_probe: could not install nmi irq handler
[    1.356244] printk: console [ttyFIQ0] enabled
[    1.357018] printk: bootconsole [uart8250] disabled
[    1.357504] Registered fiq debugger ttyFIQ0
[    1.357657] vcc12v_dcin: 12000 mV, enabled
[    1.357706] reg-fixed-voltage vcc12v-dcin: vcc12v_dcin supplying 12000000uV
[    1.357734] reg-fixed-voltage vcc5v0-sys: Looking up vin-supply from device tree
[    1.357737] vcc5v0_sys: supplied by vcc12v_dcin
[    1.357741] vcc12v_dcin: could not add device link regulator.2: -ENOENT
[    1.357750] vcc5v0_sys: 5000 mV, enabled
[    1.357788] reg-fixed-voltage vcc5v0-sys: vcc5v0_sys supplying 5000000uV
[    1.357813] reg-fixed-voltage vcc5v0-usbdcin: Looking up vin-supply from device tree
[    1.357815] vcc5v0_usbdcin: supplied by vcc12v_dcin
[    1.357819] vcc12v_dcin: could not add device link regulator.3: -ENOENT
[    1.357826] vcc5v0_usbdcin: 5000 mV, enabled
[    1.357858] reg-fixed-voltage vcc5v0-usbdcin: vcc5v0_usbdcin supplying 5000000uV
[    1.357880] reg-fixed-voltage vcc5v0-usb: Looking up vin-supply from device tree
[    1.357882] vcc5v0_usb: supplied by vcc5v0_usbdcin
[    1.357885] vcc5v0_usbdcin: could not add device link regulator.4: -ENOENT
[    1.357896] vcc5v0_usb: 5000 mV, enabled
[    1.357929] reg-fixed-voltage vcc5v0-usb: vcc5v0_usb supplying 5000000uV
[    1.357951] reg-fixed-voltage vcc-1v1-nldo-s3: Looking up vin-supply from device tree
[    1.357953] vcc_1v1_nldo_s3: supplied by vcc5v0_sys
[    1.357956] vcc5v0_sys: could not add device link regulator.5: -ENOENT
[    1.357968] vcc_1v1_nldo_s3: 1100 mV, enabled
[    1.358000] reg-fixed-voltage vcc-1v1-nldo-s3: vcc_1v1_nldo_s3 supplying 1100000uV
[    1.358062] vbus5v0_typec: 5000 mV, disabled
[    1.358088] reg-fixed-voltage vbus5v0-typec: Looking up vin-supply from device tree
[    1.358090] vbus5v0_typec: supplied by vcc5v0_usb
[    1.358113] reg-fixed-voltage vbus5v0-typec: vbus5v0_typec supplying 5000000uV
[    1.358179] reg-fixed-voltage vcc5v0-host: Looking up vin-supply from device tree
[    1.358198] vcc5v0_host: supplied by vcc5v0_usb
[    1.358202] vcc5v0_usb: could not add device link regulator.7: -ENOENT
[    1.358213] vcc5v0_host: 5000 mV, enabled
[    1.358252] reg-fixed-voltage vcc5v0-host: vcc5v0_host supplying 5000000uV
[    1.358277] vcc_mipicsi0: no parameters, enabled
[    1.358307] reg-fixed-voltage vcc-mipicsi0-regulator: vcc_mipicsi0 supplying 0uV
[    1.358327] vcc_mipicsi1: no parameters, enabled
[    1.358362] reg-fixed-voltage vcc-mipicsi1-regulator: vcc_mipicsi1 supplying 0uV
[    1.358381] vcc_mipicsi1: no parameters, enabled
[    1.358400] debugfs: Directory 'vcc_mipicsi1' with parent 'regulator' already present!
[    1.358406] debugfs: Directory 'vcc_mipicsi1' with parent 'vcc_mipicsi1' already present!
[    1.358410] reg-fixed-voltage vcc-mipidcphy0-regulator: vcc_mipicsi1 supplying 0uV
[    1.358431] vcc_wm8904: no parameters, enabled
[    1.358463] reg-fixed-voltage vcc-wm8904-regulator: vcc_wm8904 supplying 0uV
[    1.358646] iommu: Default domain type: Translated
[    1.358692] rk_iommu fdab9000.iommu: version = 2
[    1.358882] rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up vdpu-supply from device tree
[    1.358892] rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up vdpu-supply property in node /power-management@fd8d8000/power-controller failed
[    1.358938] rk_iommu fdb50800.iommu: version = 2
[    1.359090] rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up rga30-supply from device tree
[    1.359099] rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up rga30-supply property in node /power-management@fd8d8000/power-controller failed
[    1.359121] rk_iommu fdb60f00.iommu: version = 2
[    1.359210] rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up rga31-supply from device tree
[    1.359218] rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up rga31-supply property in node /power-management@fd8d8000/power-controller failed
[    1.359243] rk_iommu fdb70f00.iommu: version = 2
[    1.359360] rk_iommu fdb90480.iommu: version = 2
[    1.359489] rk_iommu fdba0800.iommu: version = 2
[    1.359617] rk_iommu fdba4800.iommu: version = 2
[    1.359746] rk_iommu fdba8800.iommu: version = 2
[    1.359876] rk_iommu fdbac800.iommu: version = 2
[    1.360005] rk_iommu fdbb0800.iommu: version = 2
[    1.360087] rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up venc0-supply from device tree
[    1.360095] rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up venc0-supply property in node /power-management@fd8d8000/power-controller failed
[    1.360136] rk_iommu fdbdf000.iommu: version = 2
[    1.360195] rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up vcodec-supply from device tree
[    1.360204] rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up vcodec-supply property in node /power-management@fd8d8000/power-controller failed
[    1.360279] rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up venc1-supply from device tree
[    1.360286] rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up venc1-supply property in node /power-management@fd8d8000/power-controller failed
[    1.360331] rk_iommu fdbef000.iommu: version = 2
[    1.360481] rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up rkvdec0-supply from device tree
[    1.360489] rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up rkvdec0-supply property in node /power-management@fd8d8000/power-controller failed
[    1.360540] rk_iommu fdc38700.iommu: version = 2
[    1.360695] rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up rkvdec1-supply from device tree
[    1.360703] rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up rkvdec1-supply property in node /power-management@fd8d8000/power-controller failed
[    1.360753] rk_iommu fdc48700.iommu: version = 2
[    1.360847] rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up vi-supply from device tree
[    1.360855] rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up vi-supply property in node /power-management@fd8d8000/power-controller failed
[    1.360899] rk_iommu fdce0800.iommu: version = 2
[    1.360971] rk_iommu fdd97e00.iommu: version = 2
[    1.361165] SCSI subsystem initialized
[    1.361176] libata version 3.00 loaded.
[    1.361219] usbcore: registered new interface driver usbfs
[    1.361235] usbcore: registered new interface driver hub
[    1.361244] usbcore: registered new device driver usb
[    1.361267] mc: Linux media interface: v0.10
[    1.361274] videodev: Linux video capture interface: v2.00
[    1.361290] pps_core: LinuxPPS API ver. 1 registered
[    1.361293] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    1.361297] PTP clock support registered
[    1.361457] arm-scmi firmware:scmi: SCMI Notifications - Core Enabled.
[    1.361481] arm-scmi firmware:scmi: SCMI Protocol v2.0 'rockchip:' Firmware version 0x0
[    1.362067] Advanced Linux Sound Architecture Driver Initialized.
[    1.362189] Bluetooth: Core ver 2.22
[    1.362197] NET: Registered protocol family 31
[    1.362199] Bluetooth: HCI device and connection manager initialized
[    1.362203] Bluetooth: HCI socket layer initialized
[    1.362206] Bluetooth: L2CAP socket layer initialized
[    1.362212] Bluetooth: SCO socket layer initialized
[    1.363415] rockchip-cpuinfo cpuinfo: SoC                : 35880000
[    1.363419] rockchip-cpuinfo cpuinfo: Serial                : 69403303e51575c0
[    1.363610] clocksource: Switched to clocksource arch_sys_counter
[    1.529886] NET: Registered protocol family 2
[    1.529974] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[    1.531298] tcp_listen_portaddr_hash hash table entries: 4096 (order: 5, 163840 bytes, linear)
[    1.531368] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear)
[    1.531604] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear)
[    1.532219] TCP: Hash tables configured (established 65536 bind 65536)
[    1.532256] UDP hash table entries: 4096 (order: 6, 393216 bytes, linear)
[    1.532374] UDP-Lite hash table entries: 4096 (order: 6, 393216 bytes, linear)
[    1.532535] NET: Registered protocol family 1
[    1.532737] RPC: Registered named UNIX socket transport module.
[    1.532740] RPC: Registered udp transport module.
[    1.532743] RPC: Registered tcp transport module.
[    1.532745] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    1.533019] PCI: CLS 0 bytes, default 64
[    1.533204] Trying to unpack rootfs image as initramfs...
[    2.170673] Freeing initrd memory: 36580K
[    2.171178] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available
[    2.173175] Initialise system trusted keyrings
[    2.173241] workingset: timestamp_bits=62 max_order=21 bucket_order=0
[    2.174534] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    2.174724] NFS: Registering the id_resolver key type
[    2.174732] Key type id_resolver registered
[    2.174734] Key type id_legacy registered
[    2.174745] ntfs: driver 2.1.32 [Flags: R/O].
[    2.174785] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
[    2.174826] fuse: init (API version 7.32)
[    2.174896] SGI XFS with security attributes, no debug enabled
[    2.189155] NET: Registered protocol family 38
[    2.189160] Key type asymmetric registered
[    2.189163] Asymmetric key parser 'x509' registered
[    2.189175] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 242)
[    2.189179] io scheduler mq-deadline registered
[    2.189181] io scheduler kyber registered
[    2.189588] rockchip-csi2-dphy-hw fedc0000.csi2-dphy0-hw: csi2 dphy hw probe successfully!
[    2.189789] rockchip-csi2-dphy csi2-dphy0: csi2 dphy0 probe successfully!
[    2.190646] phy phy-fd5d0000.syscon:usb2-phy@0.0: Looking up phy-supply from device tree
[    2.190652] phy phy-fd5d0000.syscon:usb2-phy@0.0: Looking up phy-supply property in node /syscon@fd5d0000/usb2-phy@0/otg-port failed
[    2.190680] phy phy-fd5d0000.syscon:usb2-phy@0.0: Looking up vbus-supply from device tree
[    2.190684] phy phy-fd5d0000.syscon:usb2-phy@0.0: Looking up vbus-supply property in node /syscon@fd5d0000/usb2-phy@0/otg-port failed
[    2.191606] phy phy-fd5d8000.syscon:usb2-phy@8000.1: Looking up phy-supply from device tree
[    2.191613] vcc5v0_host: could not add device link phy-fd5d8000.syscon:usb2-phy@8000.1: -ENOENT
[    2.192481] phy phy-fd5dc000.syscon:usb2-phy@c000.2: Looking up phy-supply from device tree
[    2.192486] vcc5v0_host: could not add device link phy-fd5dc000.syscon:usb2-phy@c000.2: -ENOENT
[    2.193391] phy phy-fd5d4000.syscon:usb2-phy@4000.3: Looking up phy-supply from device tree
[    2.193395] vcc5v0_host: could not add device link phy-fd5d4000.syscon:usb2-phy@4000.3: -ENOENT
[    2.193438] phy phy-fd5d4000.syscon:usb2-phy@4000.3: Looking up vbus-supply from device tree
[    2.193442] phy phy-fd5d4000.syscon:usb2-phy@4000.3: Looking up vbus-supply property in node /syscon@fd5d4000/usb2-phy@4000/otg-port failed
[    2.194602] phy phy-fee00000.phy.4: Looking up phy-supply from device tree
[    2.194605] phy phy-fee00000.phy.4: Looking up phy-supply property in node /phy@fee00000 failed
[    2.194682] phy phy-fee20000.phy.5: Looking up phy-supply from device tree
[    2.194685] phy phy-fee20000.phy.5: Looking up phy-supply property in node /phy@fee20000 failed
[    2.194797] phy phy-fee10000.phy.6: Looking up phy-supply from device tree
[    2.194799] phy phy-fee10000.phy.6: Looking up phy-supply property in node /phy@fee10000 failed
[    2.195078] phy phy-feda0000.phy.7: Looking up phy-supply from device tree
[    2.195081] phy phy-feda0000.phy.7: Looking up phy-supply property in node /phy@feda0000 failed
[    2.195290] phy phy-fed60000.hdmiphy.8: Looking up phy-supply from device tree
[    2.195293] phy phy-fed60000.hdmiphy.8: Looking up phy-supply property in node /hdmiphy@fed60000 failed
[    2.195713] rockchip-hdptx-phy-hdmi fed60000.hdmiphy: hdptx phy init success
[    2.195889] phy phy-fee80000.phy.9: Looking up phy-supply from device tree
[    2.195892] phy phy-fee80000.phy.9: Looking up phy-supply property in node /phy@fee80000 failed
[    2.196312] phy phy-fed80000.phy.10: Looking up phy-supply from device tree
[    2.196316] phy phy-fed80000.phy.10: Looking up phy-supply property in node /phy@fed80000/dp-port failed
[    2.196333] phy phy-fed80000.phy.11: Looking up phy-supply from device tree
[    2.196335] phy phy-fed80000.phy.11: Looking up phy-supply property in node /phy@fed80000/u3-port failed
[    2.196484] phy phy-fed90000.phy.12: Looking up phy-supply from device tree
[    2.196487] phy phy-fed90000.phy.12: Looking up phy-supply property in node /phy@fed90000/dp-port failed
[    2.196506] phy phy-fed90000.phy.13: Looking up phy-supply from device tree
[    2.196508] phy phy-fed90000.phy.13: Looking up phy-supply property in node /phy@fed90000/u3-port failed
[    2.197089] rk-pcie fe180000.pcie: invalid prsnt-gpios property in node
[    2.197096] rk-pcie fe180000.pcie: Looking up vpcie3v3-supply from device tree
[    2.197101] rk-pcie fe180000.pcie: Looking up vpcie3v3-supply property in node /pcie@fe180000 failed
[    2.197105] rk-pcie fe180000.pcie: no vpcie3v3 regulator found
[    2.197232] rk-pcie fe180000.pcie: missing legacy IRQ resource
[    2.197239] rk-pcie fe180000.pcie: IRQ msi not found
[    2.197242] rk-pcie fe180000.pcie: use outband MSI support
[    2.197245] rk-pcie fe180000.pcie: Missing *config* reg space
[    2.197251] rk-pcie fe170000.pcie: invalid prsnt-gpios property in node
[    2.197253] rk-pcie fe180000.pcie: host bridge /pcie@fe180000 ranges:
[    2.197264] rk-pcie fe180000.pcie:      err 0x00f3000000..0x00f30fffff -> 0x00f3000000
[    2.197270] rk-pcie fe180000.pcie:       IO 0x00f3100000..0x00f31fffff -> 0x00f3100000
[    2.197273] rk-pcie fe170000.pcie: Looking up vpcie3v3-supply from device tree
[    2.197287] rk-pcie fe170000.pcie: Looking up vpcie3v3-supply property in node /pcie@fe170000 failed
[    2.197288] rk-pcie fe180000.pcie:      MEM 0x00f3200000..0x00f3ffffff -> 0x00f3200000
[    2.197292] rk-pcie fe180000.pcie:      MEM 0x09c0000000..0x09ffffffff -> 0x09c0000000
[    2.197302] rk-pcie fe170000.pcie: no vpcie3v3 regulator found
[    2.197311] rk-pcie fe180000.pcie: Missing *config* reg space
[    2.197367] rk-pcie fe180000.pcie: invalid resource
[    2.197431] mpp_service mpp-srv: b362deeea author: 蓝天浩 2023-06-09 rk3588 kernel init
[    2.197435] mpp_service mpp-srv: probe start
[    2.197558] rk-pcie fe170000.pcie: missing legacy IRQ resource
[    2.197573] rk-pcie fe170000.pcie: IRQ msi not found
[    2.197580] rk-pcie fe170000.pcie: use outband MSI support
[    2.197587] rk-pcie fe170000.pcie: Missing *config* reg space
[    2.197599] rk-pcie fe170000.pcie: host bridge /pcie@fe170000 ranges:
[    2.197617] rk-pcie fe170000.pcie:      err 0x00f2000000..0x00f20fffff -> 0x00f2000000
[    2.197631] rk-pcie fe170000.pcie:       IO 0x00f2100000..0x00f21fffff -> 0x00f2100000
[    2.197646] rk-pcie fe170000.pcie:      MEM 0x00f2200000..0x00f2ffffff -> 0x00f2200000
[    2.197657] rk-pcie fe170000.pcie:      MEM 0x0980000000..0x09bfffffff -> 0x0980000000
[    2.197682] rk-pcie fe170000.pcie: Missing *config* reg space
[    2.197708] rk-pcie fe170000.pcie: invalid resource
[    2.198482] mpp_vdpu2 fdb50400.vdpu: Adding to iommu group 1
[    2.198651] mpp_vdpu2 fdb50400.vdpu: probe device
[    2.198727] mpp_vdpu2 fdb50400.vdpu: reset group is empty!
[    2.198730] vdpu_init:498: No aclk reset resource define
[    2.198734] mpp_vdpu2 fdb50400.vdpu: reset group is empty!
[    2.198736] vdpu_init:501: No hclk reset resource define
[    2.198818] mpp_vdpu2 fdb50400.vdpu: probing finish
[    2.198920] mpp_vepu2 jpege-ccu: probing start
[    2.198924] mpp_vepu2 jpege-ccu: probing finish
[    2.198986] mpp_vepu2 fdba0000.jpege-core: Adding to iommu group 5
[    2.199051] mpp_vepu2 fdba0000.jpege-core: probing start
[    2.199126] mpp_vepu2 fdba0000.jpege-core: attach ccu success
[    2.199191] mpp_vepu2 fdba0000.jpege-core: probing finish
[    2.199230] mpp_vepu2 fdba4000.jpege-core: Adding to iommu group 6
[    2.199292] mpp_vepu2 fdba4000.jpege-core: probing start
[    2.199366] mpp_vepu2 fdba4000.jpege-core: attach ccu success
[    2.199435] mpp_vepu2 fdba4000.jpege-core: probing finish
[    2.199478] mpp_vepu2 fdba8000.jpege-core: Adding to iommu group 7
[    2.199542] mpp_vepu2 fdba8000.jpege-core: probing start
[    2.199615] mpp_vepu2 fdba8000.jpege-core: attach ccu success
[    2.199685] mpp_vepu2 fdba8000.jpege-core: probing finish
[    2.199727] mpp_vepu2 fdbac000.jpege-core: Adding to iommu group 8
[    2.199791] mpp_vepu2 fdbac000.jpege-core: probing start
[    2.199866] mpp_vepu2 fdbac000.jpege-core: attach ccu success
[    2.199936] mpp_vepu2 fdbac000.jpege-core: probing finish
[    2.200085] mpp-iep2 fdbb0000.iep: Adding to iommu group 9
[    2.200151] mpp-iep2 fdbb0000.iep: probe device
[    2.200236] mpp-iep2 fdbb0000.iep: allocate roi buffer failed
[    2.200307] mpp-iep2 fdbb0000.iep: probing finish
[    2.200414] mpp_jpgdec fdb90000.jpegd: Adding to iommu group 4
[    2.200532] mpp_jpgdec fdb90000.jpegd: probe device
[    2.200668] mpp_jpgdec fdb90000.jpegd: probing finish
[    2.200902] mpp_rkvdec2 fdc30000.rkvdec-ccu: rkvdec-ccu, probing start
[    2.200937] mpp_rkvdec2 fdc30000.rkvdec-ccu: probing finish
[    2.200984] mpp_rkvdec2 fdc38100.rkvdec-core: Adding to iommu group 12
[    2.201184] mpp_rkvdec2 fdc38100.rkvdec-core: rkvdec-core, probing start
[    2.201263] mpp_rkvdec2 fdc38100.rkvdec-core: shared_niu_a is not found!
[    2.201266] rkvdec2_init:697: No niu aclk reset resource define
[    2.201270] mpp_rkvdec2 fdc38100.rkvdec-core: shared_niu_h is not found!
[    2.201272] rkvdec2_init:700: No niu hclk reset resource define
[    2.201307] mpp_rkvdec2 fdc38100.rkvdec-core: core_mask=00010001
[    2.201310] mpp_rkvdec2 fdc38100.rkvdec-core: attach ccu as core 0
[    2.201353] mpp_rkvdec2 fdc38100.rkvdec-core: sram_start 0x00000000fd600000
[    2.201356] mpp_rkvdec2 fdc38100.rkvdec-core: rcb_iova 0x0000000010000000
[    2.201359] mpp_rkvdec2 fdc38100.rkvdec-core: sram_size 524288
[    2.201362] mpp_rkvdec2 fdc38100.rkvdec-core: rcb_size 1048576
[    2.201365] mpp_rkvdec2 fdc38100.rkvdec-core: min_width 512
[    2.201383] mpp_rkvdec2 fdc38100.rkvdec-core: probing finish
[    2.201428] mpp_rkvdec2 fdc48100.rkvdec-core: Adding to iommu group 13
[    2.201604] mpp_rkvdec2 fdc48100.rkvdec-core: rkvdec-core, probing start
[    2.201681] mpp_rkvdec2 fdc48100.rkvdec-core: shared_niu_a is not found!
[    2.201684] rkvdec2_init:697: No niu aclk reset resource define
[    2.201687] mpp_rkvdec2 fdc48100.rkvdec-core: shared_niu_h is not found!
[    2.201690] rkvdec2_init:700: No niu hclk reset resource define
[    2.201716] mpp_rkvdec2 fdc48100.rkvdec-core: core_mask=00020002
[    2.201736] mpp_rkvdec2 fdc48100.rkvdec-core: attach ccu as core 1
[    2.201779] mpp_rkvdec2 fdc48100.rkvdec-core: sram_start 0x00000000fd680000
[    2.201782] mpp_rkvdec2 fdc48100.rkvdec-core: rcb_iova 0x0000000010100000
[    2.201785] mpp_rkvdec2 fdc48100.rkvdec-core: sram_size 524288
[    2.201788] mpp_rkvdec2 fdc48100.rkvdec-core: rcb_size 1048576
[    2.201791] mpp_rkvdec2 fdc48100.rkvdec-core: min_width 512
[    2.201806] mpp_rkvdec2 fdc48100.rkvdec-core: probing finish
[    2.201912] mpp_rkvenc2 rkvenc-ccu: probing start
[    2.201916] mpp_rkvenc2 rkvenc-ccu: probing finish
[    2.201984] mpp_rkvenc2 fdbd0000.rkvenc-core: Adding to iommu group 10
[    2.202119] mpp_rkvenc2 fdbd0000.rkvenc-core: probing start
[    2.202129] mpp_rkvenc2 fdbd0000.rkvenc-core: link mode task capacity 8
[    2.202220] mpp_rkvenc2 fdbd0000.rkvenc-core: attach ccu as core 0
[    2.202294] mpp_rkvenc2 fdbd0000.rkvenc-core: probing finish
[    2.202328] mpp_rkvenc2 fdbe0000.rkvenc-core: Adding to iommu group 11
[    2.202513] mpp_rkvenc2 fdbe0000.rkvenc-core: probing start
[    2.202523] mpp_rkvenc2 fdbe0000.rkvenc-core: link mode task capacity 8
[    2.202631] mpp_rkvenc2 fdbe0000.rkvenc-core: attach ccu as core 1
[    2.202702] mpp_rkvenc2 fdbe0000.rkvenc-core: probing finish
[    2.202839] rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up av1-supply from device tree
[    2.202852] rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up av1-supply property in node /power-management@fd8d8000/power-controller failed
[    2.203034] Adding child /av1d@fdc70000
[    2.203174] register device av1d-master
[    2.203184] mpp_av1dec av1d-master: av1_iommu_of_xlate,756
[    2.203196] av1_iommu_probe_device,714, consumer : av1d-master, supplier : fdca0000.iommu
[    2.203201] mpp_av1dec av1d-master: Adding to iommu group 16
[    2.203375] mpp_av1dec av1d-master: probing start
[    2.203530] mpp_av1dec av1d-master: probing finish
[    2.203548] mpp_service mpp-srv: probe success
[    2.209351] dma-pl330 fea10000.dma-controller: Loaded driver for PL330 DMAC-241330
[    2.209359] dma-pl330 fea10000.dma-controller:         DBUFF-128x8bytes Num_Chans-8 Num_Peri-32 Num_Events-16
[    2.210068] dma-pl330 fea30000.dma-controller: Loaded driver for PL330 DMAC-241330
[    2.210074] dma-pl330 fea30000.dma-controller:         DBUFF-128x8bytes Num_Chans-8 Num_Peri-32 Num_Events-16
[    2.210794] dma-pl330 fed10000.dma-controller: Loaded driver for PL330 DMAC-241330
[    2.210801] dma-pl330 fed10000.dma-controller:         DBUFF-128x8bytes Num_Chans-8 Num_Peri-32 Num_Events-16
[    2.211680] rockchip-pvtm fda40000.pvtm: pvtm@0 probed
[    2.211727] rockchip-pvtm fda50000.pvtm: pvtm@1 probed
[    2.211774] rockchip-pvtm fda60000.pvtm: pvtm@2 probed
[    2.211815] rockchip-pvtm fdaf0000.pvtm: pvtm@3 probed
[    2.211854] rockchip-pvtm fdb30000.pvtm: pvtm@4 probed
[    2.212291] rockchip-system-monitor rockchip-system-monitor: system monitor probe
[    2.212999] Serial: 8250/16550 driver, 10 ports, IRQ sharing disabled
[    2.213359] fd890000.serial: ttyS0 at MMIO 0xfd890000 (irq = 27, base_baud = 1500000) is a 16550A
[    2.213658] feb40000.serial: ttyS1 at MMIO 0xfeb40000 (irq = 94, base_baud = 1500000) is a 16550A
[    2.213834] feb90000.serial: ttyS6 at MMIO 0xfeb90000 (irq = 95, base_baud = 1500000) is a 16550A
[    2.214001] feba0000.serial: ttyS7 at MMIO 0xfeba0000 (irq = 96, base_baud = 1500000) is a 16550A
[    2.214177] febb0000.serial: ttyS8 at MMIO 0xfebb0000 (irq = 97, base_baud = 1500000) is a 16550A
[    2.215192] random: fast init done
[    2.215245] random: crng init done
[    2.215894] rockchip-vop2 fdd90000.vop: Adding to iommu group 15
[    2.226254] brd: module loaded
[    2.228814] loop: module loaded
[    2.228959] zram: Added device: zram0
[    2.229085] lkdtm: No crash points registered, enable through debugfs
[    2.229202] system_heap: orders[0] = 6
[    2.229207] system_heap: orders[1] = 4
[    2.229210] system_heap: orders[2] = 0
[    2.230953] rockchip-spi feb20000.spi: no high_speed pinctrl state
[    2.232080] rk806 spi2.0: chip id: RK806,ver:0x2, 0x1
[    2.232221] rk806 spi2.0: ON: 0x40 OFF:0x0
[    2.233904] rk806-regulator rk806-regulator.3.auto: Looking up vcc1-supply from device tree
[    2.233911] vdd_gpu_s0: supplied by vcc5v0_sys
[    2.233919] vcc5v0_sys: could not add device link regulator.12: -ENOENT
[    2.234073] vdd_gpu_s0: 550 <--> 950 mV at 750 mV, enabled
[    2.234370] rk806-regulator rk806-regulator.3.auto: Looking up vcc2-supply from device tree
[    2.234374] vdd_cpu_lit_s0: supplied by vcc5v0_sys
[    2.234381] vcc5v0_sys: could not add device link regulator.13: -ENOENT
[    2.234463] vdd_cpu_lit_s0: 550 <--> 950 mV at 750 mV, enabled
[    2.234800] rk806-regulator rk806-regulator.3.auto: Looking up vcc3-supply from device tree
[    2.234804] vdd_log_s0: supplied by vcc5v0_sys
[    2.234810] vcc5v0_sys: could not add device link regulator.14: -ENOENT
[    2.234892] vdd_log_s0: 750 mV, enabled
[    2.235168] rk806-regulator rk806-regulator.3.auto: Looking up vcc4-supply from device tree
[    2.235172] vdd_vdenc_s0: supplied by vcc5v0_sys
[    2.235178] vcc5v0_sys: could not add device link regulator.15: -ENOENT
[    2.235261] vdd_vdenc_s0: 550 <--> 950 mV at 750 mV, enabled
[    2.235594] rk806-regulator rk806-regulator.3.auto: Looking up vcc5-supply from device tree
[    2.235598] vdd_ddr_s0: supplied by vcc5v0_sys
[    2.235605] vcc5v0_sys: could not add device link regulator.16: -ENOENT
[    2.235744] vdd_ddr_s0: 850 mV, enabled
[    2.235831] rk806-regulator rk806-regulator.3.auto: Looking up vcc6-supply from device tree
[    2.235836] vdd2_ddr_s3: supplied by vcc5v0_sys
[    2.235841] vcc5v0_sys: could not add device link regulator.17: -ENOENT
[    2.235974] vdd2_ddr_s3: at 500 mV, enabled
[    2.236130] vdd_2v0_pldo_s3: Bringing 1975000uV into 2000000-2000000uV
[    2.236309] rk806-regulator rk806-regulator.3.auto: Looking up vcc7-supply from device tree
[    2.236312] vdd_2v0_pldo_s3: supplied by vcc5v0_sys
[    2.236318] vcc5v0_sys: could not add device link regulator.18: -ENOENT
[    2.236398] vdd_2v0_pldo_s3: 2000 mV, enabled
[    2.236554] vcc_3v3_s3: Bringing 3275000uV into 3300000-3300000uV
[    2.236732] rk806-regulator rk806-regulator.3.auto: Looking up vcc8-supply from device tree
[    2.236736] vcc_3v3_s3: supplied by vcc5v0_sys
[    2.236741] vcc5v0_sys: could not add device link regulator.19: -ENOENT
[    2.236822] vcc_3v3_s3: 3300 mV, enabled
[    2.237030] rk806-regulator rk806-regulator.3.auto: Looking up vcc9-supply from device tree
[    2.237034] vddq_ddr_s0: supplied by vcc5v0_sys
[    2.237040] vcc5v0_sys: could not add device link regulator.20: -ENOENT
[    2.237230] vddq_ddr_s0: at 500 mV, enabled
[    2.237390] vcc_1v8_s3: Bringing 1775000uV into 1800000-1800000uV
[    2.237567] rk806-regulator rk806-regulator.3.auto: Looking up vcc10-supply from device tree
[    2.237571] vcc_1v8_s3: supplied by vcc5v0_sys
[    2.237576] vcc5v0_sys: could not add device link regulator.21: -ENOENT
[    2.237656] vcc_1v8_s3: 1800 mV, enabled
[    2.237887] rk806-regulator rk806-regulator.3.auto: Looking up vcc13-supply from device tree
[    2.237892] vdd_0v75_s3: supplied by vcc_1v1_nldo_s3
[    2.237898] vcc_1v1_nldo_s3: could not add device link regulator.22: -ENOENT
[    2.238038] vdd_0v75_s3: 750 mV, enabled
[    2.238314] rk806-regulator rk806-regulator.3.auto: Looking up vcc13-supply from device tree
[    2.238319] vdd_ddr_pll_s0: supplied by vcc_1v1_nldo_s3
[    2.238325] vcc_1v1_nldo_s3: could not add device link regulator.23: -ENOENT
[    2.238399] vdd_ddr_pll_s0: 850 mV, enabled
[    2.238618] rk806-regulator rk806-regulator.3.auto: Looking up vcc13-supply from device tree
[    2.238622] avdd_0v75_s0: supplied by vcc_1v1_nldo_s3
[    2.238628] vcc_1v1_nldo_s3: could not add device link regulator.24: -ENOENT
[    2.238705] avdd_0v75_s0: 750 mV, enabled
[    2.238925] rk806-regulator rk806-regulator.3.auto: Looking up vcc14-supply from device tree
[    2.238930] vdd_0v85_s0: supplied by vcc_1v1_nldo_s3
[    2.238935] vcc_1v1_nldo_s3: could not add device link regulator.25: -ENOENT
[    2.239009] vdd_0v85_s0: 850 mV, enabled
[    2.239231] rk806-regulator rk806-regulator.3.auto: Looking up vcc14-supply from device tree
[    2.239235] nldo5_s0: supplied by vcc_1v1_nldo_s3
[    2.239241] vcc_1v1_nldo_s3: could not add device link regulator.26: -ENOENT
[    2.239376] nldo5_s0: 750 mV, enabled
[    2.239654] rk806-regulator rk806-regulator.3.auto: Looking up vcc11-supply from device tree
[    2.239690] avcc_1v8_s0: supplied by vdd_2v0_pldo_s3
[    2.239695] vdd_2v0_pldo_s3: could not add device link regulator.27: -ENOENT
[    2.239830] avcc_1v8_s0: 1800 mV, enabled
[    2.240110] rk806-regulator rk806-regulator.3.auto: Looking up vcc11-supply from device tree
[    2.240117] vcc_1v8_s0: supplied by vdd_2v0_pldo_s3
[    2.240122] vdd_2v0_pldo_s3: could not add device link regulator.28: -ENOENT
[    2.240199] vcc_1v8_s0: 1800 mV, enabled
[    2.240432] rk806-regulator rk806-regulator.3.auto: Looking up vcc11-supply from device tree
[    2.240438] avdd_1v2_s0: supplied by vdd_2v0_pldo_s3
[    2.240444] vdd_2v0_pldo_s3: could not add device link regulator.29: -ENOENT
[    2.240519] avdd_1v2_s0: 1200 mV, enabled
[    2.240739] rk806-regulator rk806-regulator.3.auto: Looking up vcc12-supply from device tree
[    2.240744] vcc_3v3_s0: supplied by vcc5v0_sys
[    2.240750] vcc5v0_sys: could not add device link regulator.30: -ENOENT
[    2.240826] vcc_3v3_s0: 3300 mV, enabled
[    2.241040] rk806-regulator rk806-regulator.3.auto: Looking up vcc12-supply from device tree
[    2.241044] vccio_sd_s0: supplied by vcc5v0_sys
[    2.241050] vcc5v0_sys: could not add device link regulator.31: -ENOENT
[    2.241130] vccio_sd_s0: 1800 <--> 3300 mV at 3300 mV, enabled
[    2.241357] rk806-regulator rk806-regulator.3.auto: Looking up vcca-supply from device tree
[    2.241361] pldo6_s3: supplied by vcc5v0_sys
[    2.241367] vcc5v0_sys: could not add device link regulator.32: -ENOENT
[    2.241447] pldo6_s3: 1800 mV, enabled
[    2.241629] rk806 spi2.0: no sleep-setting state
[    2.241634] rk806 spi2.0: no reset-setting pinctrl state
[    2.241639] rk806 spi2.0: no dvs-setting pinctrl state
[    2.243782] libphy: Fixed MDIO Bus: probed
[    2.243879] tun: Universal TUN/TAP device driver, 1.6
[    2.243932] CAN device driver interface
[    2.245503] rk_gmac-dwmac fe1b0000.ethernet: IRQ eth_lpi not found
[    2.245649] rk_gmac-dwmac fe1b0000.ethernet: Looking up phy-supply from device tree
[    2.245658] rk_gmac-dwmac fe1b0000.ethernet: Looking up phy-supply property in node /ethernet@fe1b0000 failed
[    2.245672] rk_gmac-dwmac fe1b0000.ethernet: no regulator found
[    2.245677] rk_gmac-dwmac fe1b0000.ethernet: clock input or output? (output).
[    2.245682] rk_gmac-dwmac fe1b0000.ethernet: Can not read property: tx_delay.
[    2.245687] rk_gmac-dwmac fe1b0000.ethernet: set tx_delay to 0xffffffff
[    2.245692] rk_gmac-dwmac fe1b0000.ethernet: Can not read property: rx_delay.
[    2.245696] rk_gmac-dwmac fe1b0000.ethernet: set rx_delay to 0xffffffff
[    2.245712] rk_gmac-dwmac fe1b0000.ethernet: integrated PHY? (no).
[    2.245718] rk_gmac-dwmac fe1b0000.ethernet: cannot get clock mac_clk_rx
[    2.245723] rk_gmac-dwmac fe1b0000.ethernet: cannot get clock mac_clk_tx
[    2.245735] rk_gmac-dwmac fe1b0000.ethernet: cannot get clock clk_mac_speed
[    2.245951] rk_gmac-dwmac fe1b0000.ethernet: init for RGMII_RXID
[    2.246066] rk_gmac-dwmac fe1b0000.ethernet: User ID: 0x30, Synopsys ID: 0x51
[    2.246072] rk_gmac-dwmac fe1b0000.ethernet:         DWMAC4/5
[    2.246078] rk_gmac-dwmac fe1b0000.ethernet: DMA HW capability register supported
[    2.246082] rk_gmac-dwmac fe1b0000.ethernet: RX Checksum Offload Engine supported
[    2.246087] rk_gmac-dwmac fe1b0000.ethernet: TX Checksum insertion supported
[    2.246091] rk_gmac-dwmac fe1b0000.ethernet: Wake-Up On Lan supported
[    2.246119] rk_gmac-dwmac fe1b0000.ethernet: TSO supported
[    2.246124] rk_gmac-dwmac fe1b0000.ethernet: Enable RX Mitigation via HW Watchdog Timer
[    2.246130] rk_gmac-dwmac fe1b0000.ethernet: Enabled Flow TC (entries=2)
[    2.246134] rk_gmac-dwmac fe1b0000.ethernet: TSO feature enabled
[    2.246139] rk_gmac-dwmac fe1b0000.ethernet: Using 32 bits DMA width
[    2.265363] hwrng: no data available
[    2.376967] libphy: stmmac: probed
[    2.377726] Intel(R) Wireless WiFi driver for Linux
[    2.377775] usbcore: registered new interface driver rtl8150
[    2.377792] usbcore: registered new interface driver r8152
[    2.377807] usbcore: registered new interface driver asix
[    2.377821] usbcore: registered new interface driver ax88179_178a
[    2.377834] usbcore: registered new interface driver cdc_ether
[    2.377848] usbcore: registered new interface driver net1080
[    2.377861] usbcore: registered new interface driver cdc_subset
[    2.377874] usbcore: registered new interface driver zaurus
[    2.377892] usbcore: registered new interface driver cdc_ncm
[    2.377902] GobiNet::3662::GobiUSBNetModInit GobiNet: Fibocom_Linux_GobiNet_Driver_V2.01.00.05
[    2.377918] usbcore: registered new interface driver GobiNet
[    2.384425] naneng-combphy fee20000.phy: phy type select 4 overwriting type 2
[    2.391125] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    2.391145] ehci-pci: EHCI PCI platform driver
[    2.391174] ehci-platform: EHCI generic platform driver
[    2.393588] ehci-platform fc800000.usb: EHCI Host Controller
[    2.393686] ehci-platform fc800000.usb: new USB bus registered, assigned bus number 1
[    2.393749] ehci-platform fc800000.usb: irq 19, io mem 0xfc800000
[    2.404725] rk-pcie fe180000.pcie: PCIe Linking... LTSSM is 0x3
[    2.404758] rk-pcie fe170000.pcie: PCIe Linking... LTSSM is 0x3
[    2.406953] ehci-platform fc800000.usb: USB 2.0 started, EHCI 1.00
[    2.407026] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
[    2.407032] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.407037] usb usb1: Product: EHCI Host Controller
[    2.407042] usb usb1: Manufacturer: Linux 5.10.66-gb362deeea7a7-dirty ehci_hcd
[    2.407046] usb usb1: SerialNumber: fc800000.usb
[    2.407227] hub 1-0:1.0: USB hub found
[    2.407241] hub 1-0:1.0: 1 port detected
[    2.409726] ehci-platform fc880000.usb: EHCI Host Controller
[    2.409783] ehci-platform fc880000.usb: new USB bus registered, assigned bus number 2
[    2.409829] ehci-platform fc880000.usb: irq 21, io mem 0xfc880000
[    2.420287] ehci-platform fc880000.usb: USB 2.0 started, EHCI 1.00
[    2.420351] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
[    2.420356] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.420361] usb usb2: Product: EHCI Host Controller
[    2.420365] usb usb2: Manufacturer: Linux 5.10.66-gb362deeea7a7-dirty ehci_hcd
[    2.420370] usb usb2: SerialNumber: fc880000.usb
[    2.420525] hub 2-0:1.0: USB hub found
[    2.420537] hub 2-0:1.0: 1 port detected
[    2.420864] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    2.420872] ohci-platform: OHCI generic platform driver
[    2.421005] ohci-platform fc840000.usb: Generic Platform OHCI controller
[    2.421065] ohci-platform fc840000.usb: new USB bus registered, assigned bus number 3
[    2.421102] ohci-platform fc840000.usb: irq 20, io mem 0xfc840000
[    2.430283] rk-pcie fe180000.pcie: PCIe Linking... LTSSM is 0x3
[    2.456948] rk-pcie fe180000.pcie: PCIe Linking... LTSSM is 0x3
[    2.481011] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.10
[    2.481019] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.481024] usb usb3: Product: Generic Platform OHCI controller
[    2.481028] usb usb3: Manufacturer: Linux 5.10.66-gb362deeea7a7-dirty ohci_hcd
[    2.481032] usb usb3: SerialNumber: fc840000.usb
[    2.481185] hub 3-0:1.0: USB hub found
[    2.481197] hub 3-0:1.0: 1 port detected
[    2.481405] ohci-platform fc8c0000.usb: Generic Platform OHCI controller
[    2.481461] ohci-platform fc8c0000.usb: new USB bus registered, assigned bus number 4
[    2.481499] ohci-platform fc8c0000.usb: irq 22, io mem 0xfc8c0000
[    2.483614] rk-pcie fe180000.pcie: PCIe Linking... LTSSM is 0x3
[    2.486969] rk-pcie fe170000.pcie: PCIe Link up, LTSSM is 0x30011
[    2.487131] rk-pcie fe170000.pcie: PCI host bridge to bus 0002:20
[    2.487148] pci_bus 0002:20: root bus resource [bus 20-2f]
[    2.487161] pci_bus 0002:20: root bus resource [??? 0xf2000000-0xf20fffff flags 0x0]
[    2.487175] pci_bus 0002:20: root bus resource [io  0x100000-0x1fffff] (bus address [0xf2100000-0xf21fffff])
[    2.487187] pci_bus 0002:20: root bus resource [mem 0xf2200000-0xf2ffffff]
[    2.487199] pci_bus 0002:20: root bus resource [mem 0x980000000-0x9bfffffff pref]
[    2.487244] pci 0002:20:00.0: [1d87:3588] type 01 class 0x060400
[    2.487278] pci 0002:20:00.0: reg 0x38: [mem 0x00000000-0x0000ffff pref]
[    2.487353] pci 0002:20:00.0: supports D1 D2
[    2.487365] pci 0002:20:00.0: PME# supported from D0 D1 D3hot
[    2.496939] pci 0002:20:00.0: Primary bus is hard wired to 0
[    2.496977] pci 0002:20:00.0: bridge configuration invalid ([bus 01-ff]), reconfiguring
[    2.497229] pci 0002:21:00.0: [8086:24fd] type 00 class 0x028000
[    2.497347] pci 0002:21:00.0: reg 0x10: [mem 0x00000000-0x00001fff 64bit]
[    2.497922] pci 0002:21:00.0: PME# supported from D0 D3hot D3cold
[    2.510280] rk-pcie fe180000.pcie: PCIe Linking... LTSSM is 0x3
[    2.516317] pci_bus 0002:21: busn_res: [bus 21-2f] end is updated to 21
[    2.516360] pci 0002:20:00.0: BAR 8: assigned [mem 0xf2200000-0xf22fffff]
[    2.516377] pci 0002:20:00.0: BAR 6: assigned [mem 0xf2300000-0xf230ffff pref]
[    2.516395] pci 0002:21:00.0: BAR 0: assigned [mem 0xf2200000-0xf2201fff 64bit]
[    2.516455] pci 0002:20:00.0: PCI bridge to [bus 21]
[    2.516469] pci 0002:20:00.0:   bridge window [mem 0xf2200000-0xf22fffff]
[    2.519229] pcieport 0002:20:00.0: PME: Signaling with IRQ 145
[    2.519587] iwlwifi 0002:21:00.0: enabling device (0000 -> 0002)
[    2.520931] iwlwifi 0002:21:00.0: Found debug destination: EXTERNAL_DRAM
[    2.520950] iwlwifi 0002:21:00.0: Found debug configuration: 0
[    2.522437] iwlwifi 0002:21:00.0: loaded firmware version 36.77d01142.0 8265-36.ucode op_mode iwlmvm
[    2.522599] iwlwifi 0002:21:00.0: Detected Intel(R) Dual Band Wireless AC 8265, REV=0x230
[    2.529290] iwlwifi 0002:21:00.0: reporting RF_KILL (radio disabled)
[    2.540278] rk-pcie fe180000.pcie: PCIe Linking... LTSSM is 0x3
[    2.544348] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.10
[    2.544356] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.544361] usb usb4: Product: Generic Platform OHCI controller
[    2.544365] usb usb4: Manufacturer: Linux 5.10.66-gb362deeea7a7-dirty ohci_hcd
[    2.544370] usb usb4: SerialNumber: fc8c0000.usb
[    2.544547] hub 4-0:1.0: USB hub found
[    2.544560] hub 4-0:1.0: 1 port detected
[    2.545247] xhci-hcd xhci-hcd.4.auto: xHCI Host Controller
[    2.545359] xhci-hcd xhci-hcd.4.auto: new USB bus registered, assigned bus number 5
[    2.545441] xhci-hcd xhci-hcd.4.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x0000000002010010
[    2.545467] xhci-hcd xhci-hcd.4.auto: irq 134, io mem 0xfcd00000
[    2.545587] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
[    2.545593] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.545597] usb usb5: Product: xHCI Host Controller
[    2.545602] usb usb5: Manufacturer: Linux 5.10.66-gb362deeea7a7-dirty xhci-hcd
[    2.545606] usb usb5: SerialNumber: xhci-hcd.4.auto
[    2.545812] hub 5-0:1.0: USB hub found
[    2.545823] hub 5-0:1.0: 1 port detected
[    2.545927] xhci-hcd xhci-hcd.4.auto: xHCI Host Controller
[    2.546008] xhci-hcd xhci-hcd.4.auto: new USB bus registered, assigned bus number 6
[    2.546016] xhci-hcd xhci-hcd.4.auto: Host supports USB 3.0 SuperSpeed
[    2.546037] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
[    2.546071] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10
[    2.546076] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.546080] usb usb6: Product: xHCI Host Controller
[    2.546085] usb usb6: Manufacturer: Linux 5.10.66-gb362deeea7a7-dirty xhci-hcd
[    2.546089] usb usb6: SerialNumber: xhci-hcd.4.auto
[    2.546280] hub 6-0:1.0: USB hub found
[    2.546294] hub 6-0:1.0: 1 port detected
[    2.546486] phy phy-fd5d4000.syscon:usb2-phy@4000.3: illegal mode
[    2.546496] xhci-hcd xhci-hcd.5.auto: xHCI Host Controller
[    2.546569] xhci-hcd xhci-hcd.5.auto: new USB bus registered, assigned bus number 7
[    2.546722] xhci-hcd xhci-hcd.5.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x0000000002010010
[    2.546742] xhci-hcd xhci-hcd.5.auto: irq 135, io mem 0xfc400000
[    2.546863] usb usb7: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
[    2.546869] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.546873] usb usb7: Product: xHCI Host Controller
[    2.546877] usb usb7: Manufacturer: Linux 5.10.66-gb362deeea7a7-dirty xhci-hcd
[    2.546881] usb usb7: SerialNumber: xhci-hcd.5.auto
[    2.547087] hub 7-0:1.0: USB hub found
[    2.547099] hub 7-0:1.0: 1 port detected
[    2.547199] xhci-hcd xhci-hcd.5.auto: xHCI Host Controller
[    2.547284] xhci-hcd xhci-hcd.5.auto: new USB bus registered, assigned bus number 8
[    2.547298] xhci-hcd xhci-hcd.5.auto: Host supports USB 3.0 SuperSpeed
[    2.547327] usb usb8: We don't know the algorithms for LPM for this host, disabling LPM.
[    2.547372] usb usb8: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10
[    2.547378] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.547382] usb usb8: Product: xHCI Host Controller
[    2.547387] usb usb8: Manufacturer: Linux 5.10.66-gb362deeea7a7-dirty xhci-hcd
[    2.547392] usb usb8: SerialNumber: xhci-hcd.5.auto
[    2.547617] hub 8-0:1.0: USB hub found
[    2.547629] hub 8-0:1.0: 1 port detected
[    2.547809] usbcore: registered new interface driver cdc_acm
[    2.547813] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[    2.547952] usbcore: registered new interface driver uas
[    2.548017] usbcore: registered new interface driver usb-storage
[    2.548052] usbcore: registered new interface driver usbserial_generic
[    2.548061] usbserial: USB Serial support registered for generic
[    2.548080] usbcore: registered new interface driver cp210x
[    2.548089] usbserial: USB Serial support registered for cp210x
[    2.548130] usbcore: registered new interface driver ftdi_sio
[    2.548139] usbserial: USB Serial support registered for FTDI USB Serial Device
[    2.548249] usbcore: registered new interface driver keyspan
[    2.548258] usbserial: USB Serial support registered for Keyspan - (without firmware)
[    2.548267] usbserial: USB Serial support registered for Keyspan 1 port adapter
[    2.548276] usbserial: USB Serial support registered for Keyspan 2 port adapter
[    2.548284] usbserial: USB Serial support registered for Keyspan 4 port adapter
[    2.548306] usbcore: registered new interface driver option
[    2.548315] usbserial: USB Serial support registered for GSM modem (1-port)
[    2.548475] usbcore: registered new interface driver oti6858
[    2.548484] usbserial: USB Serial support registered for oti6858
[    2.548501] usbcore: registered new interface driver pl2303
[    2.548509] usbserial: USB Serial support registered for pl2303
[    2.548535] usbcore: registered new interface driver qcserial
[    2.548544] usbserial: USB Serial support registered for Qualcomm USB modem
[    2.548576] usbcore: registered new interface driver sierra
[    2.548584] usbserial: USB Serial support registered for Sierra USB modem
[    2.549108] usbcore: registered new interface driver usbtouchscreen
[    2.550015] input: rk805 pwrkey as /devices/platform/feb20000.spi/spi_master/spi2/spi2.0/rk805-pwrkey.2.auto/input/input0
[    2.550283] i2c /dev entries driver
[    2.550541] iwlwifi 0002:21:00.0: Applying debug destination EXTERNAL_DRAM
[    2.551770] iwlwifi 0002:21:00.0: Allocated 0x00400000 bytes for firmware monitor.
[    2.553753] rk860-regulator 0-0042: Looking up vin-supply from device tree
[    2.553760] vdd_cpu_big0_s0: supplied by vcc5v0_sys
[    2.553767] vcc5v0_sys: could not add device link regulator.33: -ENOENT
[    2.557819] vdd_cpu_big0_s0: 550 <--> 1050 mV at 800 mV, enabled
[    2.562233] rk860-regulator 0-0043: Looking up vin-supply from device tree
[    2.562237] vdd_cpu_big1_s0: supplied by vcc5v0_sys
[    2.562243] vcc5v0_sys: could not add device link regulator.34: -ENOENT
[    2.566289] vdd_cpu_big1_s0: 550 <--> 1050 mV at 800 mV, enabled
[    2.568528] pca953x 2-0021: Looking up vcc-supply from device tree
[    2.568542] pca953x 2-0021: Looking up vcc-supply property in node /i2c@feaa0000/pca9555_gpio@21 failed
[    2.568570] pca953x 2-0021: supply vcc not found, using dummy regulator
[    2.568706] pca953x 2-0021: using no AI
[    2.570278] rk-pcie fe180000.pcie: PCIe Linking... LTSSM is 0x3
[    2.570634] husb311 2-004e: Looking up vbus-supply from device tree
[    2.576857] rtc-hym8563 2-0051: rtc information is valid
[    2.578693] rtc-hym8563 2-0051: registered as rtc0
[    2.578986] rtc-hym8563 2-0051: setting system clock to 2023-12-11T03:26:58 UTC (1702265218)
[    2.580895] rk860-regulator 2-0042: Looking up vin-supply from device tree
[    2.580900] vdd_npu_s0: supplied by vcc5v0_sys
[    2.580908] vcc5v0_sys: could not add device link regulator.35: -ENOENT
[    2.582412] vdd_npu_s0: 550 <--> 950 mV at 800 mV, enabled
[    2.586279] rkcifhw fdce0000.rkcif: Adding to iommu group 14
[    2.586816] rkcifhw fdce0000.rkcif: No reserved memory region assign to CIF
[    2.587046] rkcif rkcif-mipi-lvds2: Adding to iommu group 14
[    2.587082] rkcif rkcif-mipi-lvds2: rkcif driver version: v00.01.0a
[    2.587170] rkcif rkcif-mipi-lvds2: attach to cif hw node
[    2.587183] rkcif rkcif-mipi-lvds2: rkcif wait line 0
[    2.587196] : terminal subdev does not exist
[    2.587205] : terminal subdev does not exist
[    2.587215] : terminal subdev does not exist
[    2.587224] : terminal subdev does not exist
[    2.587235] : get_remote_sensor: video pad[0] is null
[    2.587244] : rkcif_update_sensor_info: stream[0] get remote sensor_sd failed!
[    2.587255] : get_remote_sensor: video pad[0] is null
[    2.587264] : rkcif_update_sensor_info: stream[0] get remote sensor_sd failed!
[    2.587273] : get_remote_sensor: video pad[0] is null
[    2.587282] : rkcif_update_sensor_info: stream[0] get remote sensor_sd failed!
[    2.587292] : get_remote_sensor: video pad[0] is null
[    2.587300] : rkcif_update_sensor_info: stream[0] get remote sensor_sd failed!
[    2.590613] rkcif rkcif-mipi-lvds2: Entity type for entity rockchip-mipi-csi2 was not initialized!
[    2.590631] rockchip-mipi-csi2: Async registered subdev
[    2.590654] rockchip-mipi-csi2: probe success, v4l2_dev:rkcif-mipi-lvds2!
[    2.594460] rk_hdmirx fdee0000.hdmirx-controller: No reserved memory for HDMIRX, use default CMA
[    2.594506] rk_hdmirx fdee0000.hdmirx-controller: hdmirx_probe: cpu_aff:0x400, Bound_cpu:4
[    2.595059] rk_hdmirx fdee0000.hdmirx-controller: hdmirx_audio_interrupts_setup: 0
[    2.596442] rk_hdmirx fdee0000.hdmirx-controller: fdee0000.hdmirx-controller driver probe ok!
[    2.596683] usbcore: registered new interface driver uvcvideo
[    2.596696] USB Video Class driver (1.1.1)
[    2.596952] rk-pcie fe180000.pcie: PCIe Linking... LTSSM is 0x3
[    2.599290] rockchip-thermal fec00000.tsadc: Missing rockchip,grf property
[    2.600253] rockchip-thermal fec00000.tsadc: tsadc is probed successfully!
[    2.601607] Bluetooth: HCI UART driver ver 2.3
[    2.601621] Bluetooth: HCI UART protocol H4 registered
[    2.601631] Bluetooth: HCI UART protocol ATH3K registered
[    2.601705] usbcore: registered new interface driver bfusb
[    2.601811] usbcore: registered new interface driver btusb
[    2.602211] cpu cpu0: Failed to get cpu_leakage
[    2.602283] cpu cpu0: Looking up cpu-supply from device tree
[    2.602985] iwlwifi 0002:21:00.0: base HW address: 00:28:f8:e3:3c:b2
[    2.603958] cpu cpu0: pvtm=1391
[    2.604156] cpu cpu0: pvtm-volt-sel=0
[    2.604209] cpu cpu0: Looking up cpu-supply from device tree
[    2.604392] cpu cpu0: Looking up mem-supply from device tree
[    2.604572] cpu cpu4: Failed to get cpu_leakage
[    2.604608] cpu cpu4: Looking up cpu-supply from device tree
[    2.611309] cpu cpu4: pvtm=1610
[    2.615400] cpu cpu4: pvtm-volt-sel=0
[    2.615454] cpu cpu4: Looking up cpu-supply from device tree
[    2.616168] cpu cpu4: Looking up mem-supply from device tree
[    2.616570] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
[    2.617495] thermal thermal_zone7: power_allocator: sustainable_power will be estimated
[    2.617589] thermal thermal_zone7: failed to read out thermal zone (-61)
[    2.617679] cpu cpu6: Failed to get cpu_leakage
[    2.617716] cpu cpu6: Looking up cpu-supply from device tree
[    2.623615] rk-pcie fe180000.pcie: PCIe Linking... LTSSM is 0x3
[    2.624465] cpu cpu6: pvtm=1622
[    2.628628] cpu cpu6: pvtm-volt-sel=0
[    2.628729] cpu cpu6: Looking up cpu-supply from device tree
[    2.629326] cpu cpu6: Looking up mem-supply from device tree
[    2.631300] cpu cpu0: avs=0
[    2.632920] cpu cpu4: avs=0
[    2.634561] cpu cpu6: avs=0
[    2.634890] cpu cpu0: EM: hertz/watts ratio non-monotonically decreasing: em_perf_state 3 >= em_perf_state2
[    2.635096] cpu cpu0: EM: created perf domain
[    2.635207] cpu cpu0: l=0 h=2147483647 hyst=5000 l_limit=0 h_limit=0 h_table=0
[    2.635951] cpu cpu4: EM: hertz/watts ratio non-monotonically decreasing: em_perf_state 2 >= em_perf_state1
[    2.635964] cpu cpu4: EM: hertz/watts ratio non-monotonically decreasing: em_perf_state 3 >= em_perf_state2
[    2.636270] cpu cpu4: EM: created perf domain
[    2.636383] cpu cpu4: l=0 h=2147483647 hyst=5000 l_limit=0 h_limit=0 h_table=0
[    2.644781] cpu cpu6: EM: hertz/watts ratio non-monotonically decreasing: em_perf_state 2 >= em_perf_state1
[    2.644787] cpu cpu6: EM: hertz/watts ratio non-monotonically decreasing: em_perf_state 3 >= em_perf_state2
[    2.644927] cpu cpu6: EM: created perf domain
[    2.645358] cpu cpu6: l=0 h=2147483647 hyst=5000 l_limit=0 h_limit=0 h_table=0
[    2.654505] sdhci: Secure Digital Host Controller Interface driver
[    2.654515] sdhci: Copyright(c) Pierre Ossman
[    2.654520] Synopsys Designware Multimedia Card Interface Driver
[    2.655062] sdhci-pltfm: SDHCI platform and OF driver helper
[    2.655455] dwmmc_rockchip fe2c0000.mmc: IDMAC supports 32-bit address mode.
[    2.655482] dwmmc_rockchip fe2c0000.mmc: Using internal DMA controller.
[    2.655490] dwmmc_rockchip fe2c0000.mmc: Version ID is 270a
[    2.655516] dwmmc_rockchip fe2c0000.mmc: DW MMC controller at irq 80,32 bit host data width,256 deep fifo
[    2.655567] dwmmc_rockchip fe2c0000.mmc: Looking up vmmc-supply from device tree
[    2.655578] dwmmc_rockchip fe2c0000.mmc: Looking up vmmc-supply property in node /mmc@fe2c0000 failed
[    2.655595] dwmmc_rockchip fe2c0000.mmc: Looking up vqmmc-supply from device tree
[    2.655767] mmc_host mmc0: card is polling.
[    2.656089] sdhci-dwcmshc fe2e0000.mmc: Looking up vmmc-supply from device tree
[    2.656097] sdhci-dwcmshc fe2e0000.mmc: Looking up vmmc-supply property in node /mmc@fe2e0000 failed
[    2.656337] arm-scmi firmware:scmi: Failed. SCMI protocol 17 not active.
[    2.656379] SMCCC: SOC_ID: ARCH_FEATURES(ARCH_SOC_ID) returned error: fffffffffffffffd
[    2.656790] sdhci-dwcmshc fe2e0000.mmc: Looking up vqmmc-supply from device tree
[    2.656799] sdhci-dwcmshc fe2e0000.mmc: Looking up vqmmc-supply property in node /mmc@fe2e0000 failed
[    2.656886] cryptodev: driver 1.12 loaded.

剩下的dmesg
[    2.656921] hid: raw HID events driver (C) Jiri Kosina
[    2.657090] usbcore: registered new interface driver usbhid
[    2.657096] usbhid: USB HID core driver
[    2.658965] rockchip-saradc fec10000.saradc: Looking up vref-supply from device tree
[    2.660387] optee: probing for conduit method.
[    2.660403] optee: revision 3.13 (4542e1ef)
[    2.660691] optee: initialized driver
[    2.661364] usbcore: registered new interface driver snd-usb-audio
[    2.662840] wm8904 3-001a: wm8904->mclk: 167831936
[    2.662893] wm8904 3-001a: Looking up DCVDD-supply from device tree
[    2.662989] wm8904 3-001a: Looking up DBVDD-supply from device tree
[    2.663007] wm8904 3-001a: Looking up AVDD-supply from device tree
[    2.663026] wm8904 3-001a: Looking up CPVDD-supply from device tree
[    2.663041] wm8904 3-001a: Looking up MICVDD-supply from device tree
[    2.663672] wm8904 3-001a: revision A
[    2.666433] rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up audio-supply from device tree
[    2.666452] rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up audio-supply property in node /power-management@fd8d8000/power-controller failed
[    2.667012] mmc_host mmc0: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
[    2.668506] Initializing XFRM netlink socket
[    2.668725] NET: Registered protocol family 10
[    2.669218] Segment Routing with IPv6
[    2.669261] NET: Registered protocol family 17
[    2.669271] NET: Registered protocol family 15
[    2.669275] can: controller area network core
[    2.669301] NET: Registered protocol family 29
[    2.669305] can: raw protocol
[    2.669311] can: broadcast manager protocol
[    2.669318] can: netlink gateway - max_hops=1
[    2.669604] Bluetooth: RFCOMM socket layer initialized
[    2.669619] Bluetooth: RFCOMM ver 1.11
[    2.669628] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[    2.669634] Bluetooth: HIDP socket layer initialized
[    2.669662] [BT_RFKILL]: Enter rfkill_rk_init
[    2.669667] [WLAN_RFKILL]: Enter rfkill_wlan_init
[    2.669947] [WLAN_RFKILL]: Enter rfkill_wlan_probe
[    2.669969] [WLAN_RFKILL]: can't find rockchip,grf property
[    2.669975] [WLAN_RFKILL]: wlan_platdata_parse_dt: wifi_chip_type = ap6255
[    2.669980] [WLAN_RFKILL]: wlan_platdata_parse_dt: enable wifi power control.
[    2.669985] [WLAN_RFKILL]: wlan_platdata_parse_dt: wifi power controled by gpio.
[    2.670022] [WLAN_RFKILL]: wlan_platdata_parse_dt: WIFI,poweren_gpio = 105 flags = 0.
[    2.670039] [WLAN_RFKILL]: wlan_platdata_parse_dt: WIFI,host_wake_irq = 103, flags = 0.
[    2.670045] [WLAN_RFKILL]: wlan_platdata_parse_dt: The ref_wifi_clk not found !
[    2.670050] [WLAN_RFKILL]: rfkill_wlan_probe: init gpio
[    2.670055] [WLAN_RFKILL]: rfkill_set_wifi_bt_power: 1
[    2.670060] [WLAN_RFKILL]: Exit rfkill_wlan_probe
[    2.670148] iwlwifi 0002:21:00.0: RF_KILL bit toggled to enable radio.
[    2.670159] iwlwifi 0002:21:00.0: reporting RF_KILL (radio enabled)
[    2.670432] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: uart_rts_gpios = 100.
[    2.670451] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,wake_gpio = 97.
[    2.670461] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,wake_host_irq = 96.
[    2.670965] [BT_RFKILL]: Request irq for bt wakeup host
[    2.671019] [BT_RFKILL]: ** disable irq
[    2.671094] [BT_RFKILL]: rfkill_rk_set_power: set bt wake_host high!
[    2.687825] mmc1: SDHCI controller on fe2e0000.mmc [fe2e0000.mmc] using ADMA
[    2.697060] [BT_RFKILL]: ENABLE UART_RTS
[    2.722801] mmc1: new HS400 Enhanced strobe MMC card at address 0001
[    2.723390] mmcblk1: mmc1:0001 TX2932 29.1 GiB
[    2.723568] mmcblk1boot0: mmc1:0001 TX2932 partition 1 4.00 MiB
[    2.723770] mmcblk1boot1: mmc1:0001 TX2932 partition 2 4.00 MiB
[    2.724120] mmcblk1rpmb: mmc1:0001 TX2932 partition 3 4.00 MiB, chardev (236:0)
[    2.727610]  mmcblk1: p1 p2 p3 p4 p5
[    2.769628] vccio_sd_s0: ramp_delay not set
[    2.792798] mmc_host mmc0: Bus speed (slot 0) = 148500000Hz (slot req 150000000Hz, actual 148500000HZ div = 0)
[    2.803814] [BT_RFKILL]: DISABLE UART_RTS
[    2.803985] [BT_RFKILL]: bt turn on power
[    2.804096] [BT_RFKILL]: Request irq for bt wakeup host
[    2.804122] [BT_RFKILL]: ** disable irq
[    2.804132] [BT_RFKILL]: bt_default device registered.
[    2.804231] Key type dns_resolver registered
[    2.805583] begin techpoint tp2855 driver probe
[    2.805597] techpoint 3-0044: driver version: 00.01.00
[    2.805671] techpoint 3-0044: Failed to get power-gpios
[    2.805683] techpoint 3-0044: Looking up dovdd-supply from device tree
[    2.805695] techpoint 3-0044: Looking up dovdd-supply property in node /i2c@feab0000/tp2855@44 failed
[    2.805725] techpoint 3-0044: supply dovdd not found, using dummy regulator
[    2.805832] techpoint 3-0044: Looking up avdd-supply from device tree
[    2.805845] techpoint 3-0044: Looking up avdd-supply property in node /i2c@feab0000/tp2855@44 failed
[    2.805862] techpoint 3-0044: supply avdd not found, using dummy regulator
[    2.805952] techpoint 3-0044: Looking up dvdd-supply from device tree
[    2.805964] techpoint 3-0044: Looking up dvdd-supply property in node /i2c@feab0000/tp2855@44 failed
[    2.805981] techpoint 3-0044: supply dvdd not found, using dummy regulator
[    2.806291] techpoint 3-0044: could not get default pinstate
[    2.806304] techpoint 3-0044: could not get sleep pinstate
[    2.835300] vendor storage:20190527 ret = 0
[    2.867782] techpoint 3-0044: chip_id_h:0x28 chip_id_l:0x55
[    2.867820] techpoint 3-0044: techpoint check chip id CHIP_TP2855 !
[    2.867897] rockchip-csi2-dphy csi2-dphy0: dphy0 matches m00_b_techpoint 3-0044:bus type 5
[    2.869280] rkcif-mipi-lvds2: Async subdev notifier completed
[    2.870396] Loading compiled-in X.509 certificates
[    2.871982] pstore: Using crash dump compression: deflate
[    2.872639] rga3_core0 fdb60000.rga: Adding to iommu group 2
[    2.873045] rga: rga3_core0_irq, irq = 33, match scheduler
[    2.873845] rga: rga3_core0 driver loaded successfully ver:3.0.76831
[    2.873910] rga: rga3_core0 probe successfully
[    2.874888] rga3_core1 fdb70000.rga: Adding to iommu group 3
[    2.875268] rga: rga3_core1_irq, irq = 34, match scheduler
[    2.875991] rga: rga3_core1 driver loaded successfully ver:3.0.76831
[    2.876037] rga: rga3_core1 probe successfully
[    2.877051] rga: rga2_irq, irq = 35, match scheduler
[    2.877770] rga: rga2 driver loaded successfully ver:3.2.63318
[    2.877828] rga: rga2 probe successfully
[    2.878733] rga: Module initialized. v1.2.6
[    2.933181] rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up gpu-supply from device tree
[    2.933208] rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up gpu-supply property in node /power-management@fd8d8000/power-controller failed
[    2.933384] mali fb000000.gpu: Kernel DDK version g11p0-01eac0
[    2.933424] mali fb000000.gpu: Looking up mali-supply from device tree
[    2.933547] mali fb000000.gpu: Looking up mem-supply from device tree
[    2.933671] mali fb000000.gpu: Looking up mali-supply from device tree
[    2.933687] vdd_gpu_s0: could not add device link fb000000.gpu: -EEXIST
[    2.933691] vdd_gpu_s0: Failed to create debugfs directory
[    2.933698] mali fb000000.gpu: Looking up mem-supply from device tree
[    2.933719] rockchip-vop2 fdd90000.vop: [drm:vop2_bind] vp0 assign plane mask: 0x5, primary plane phy id: 2
[    2.933722] vdd_gpu_s0: could not add device link fb000000.gpu: -EEXIST
[    2.933727] vdd_gpu_s0: Failed to create debugfs directory
[    2.933737] rockchip-vop2 fdd90000.vop: [drm:vop2_bind] vp1 assign plane mask: 0xa, primary plane phy id: 3
[    2.933778] rockchip-vop2 fdd90000.vop: [drm:vop2_bind] vp2 assign plane mask: 0x140, primary plane phy id: 8
[    2.933790] rockchip-vop2 fdd90000.vop: [drm:vop2_bind] vp3 assign plane mask: 0x280, primary plane phy id: 9
[    2.933845] mali fb000000.gpu: Failed to get gpu_leakage
[    2.933905] rockchip-vop2 fdd90000.vop: failed to get hdmi1_phy_pll: -517
[    2.933917] mali fb000000.gpu: Looking up mali-supply from device tree
[    2.933932] vdd_gpu_s0: could not add device link fb000000.gpu: -EEXIST
[    2.933935] vdd_gpu_s0: Failed to create debugfs directory
[    2.934181] [drm] unsupported AFBC format[3231564e]
[    2.934234] [drm] failed to init overlay plane Cluster0-win1
[    2.934279] [drm] failed to init overlay plane Cluster1-win1
[    2.934320] [drm] failed to init overlay plane Cluster2-win1
[    2.934364] [drm] failed to init overlay plane Cluster3-win1
[    2.935193] mali fb000000.gpu: pvtm=862
[    2.935258] mali fb000000.gpu: pvtm-volt-sel=2
[    2.935995] mali fb000000.gpu: avs=0
[    2.938969] W : [File] : drivers/gpu/arm/bifrost/platform/rk/mali_kbase_config_rk.c; [Line] : 132; [Func] : kbase_platform_rk_init(); power-off-delay-ms not available.
[    2.939456] mali fb000000.gpu: r0p0 status 5 is unknown; treating as r0p0 status 0
[    2.939471] mali fb000000.gpu: GPU identified as 0x7 arch 10.8.6 r0p0 status 0
[    2.939551] mali fb000000.gpu: No priority control manager is configured
[    2.939561] mali fb000000.gpu: No memory group manager is configured
[    2.939586] mali fb000000.gpu: Protected memory allocator not available
[    2.940984] mali fb000000.gpu: l=0 h=2147483647 hyst=5000 l_limit=0 h_limit=0 h_table=0
[    2.943599] mali fb000000.gpu: Probed as mali0
[    2.965029] rockchip-drm display-subsystem: bound fdd90000.vop (ops 0xffffffc0111f16a8)
[    2.968522] dwhdmi-rockchip fde80000.hdmi: registered ddc I2C bus driver
[    2.970235] rockchip-drm display-subsystem: bound fde80000.hdmi (ops 0xffffffc0111faa80)
[    2.970414] rockchip-drm display-subsystem: bound fde50000.dp (ops 0xffffffc0111fd0a0)
[    2.972055] rockchip-drm display-subsystem: failed to parse loader memory
[    2.972122] rockchip-drm display-subsystem: [drm] Cannot find any crtc or sizes
[    2.972475] rockchip-drm display-subsystem: [drm] Cannot find any crtc or sizes
[    2.973014] [drm] Initialized rockchip 3.0.0 20140818 for display-subsystem on minor 0
[    2.973597] vcc3v3_pcie30: 3300 mV, disabled
[    2.973796] reg-fixed-voltage vcc3v3-pcie30: Looking up vin-supply from device tree
[    2.973807] vcc3v3_pcie30: supplied by vcc12v_dcin
[    2.973955] reg-fixed-voltage vcc3v3-pcie30: vcc3v3_pcie30 supplying 3300000uV
[    2.974092] vcc_3v3_sd_s0: 3300 mV, enabled
[    2.974209] reg-fixed-voltage vcc-3v3-sd-s0: Looking up vin-supply from device tree
[    2.974280] vcc_3v3_sd_s0: supplied by vcc_3v3_s3
[    2.974361] reg-fixed-voltage vcc-3v3-sd-s0: vcc_3v3_sd_s0 supplying 3300000uV
[    2.974484] reg-fixed-voltage pcie20-avdd0v85: Looking up vin-supply from device tree
[    2.974535] pcie20_avdd0v85: supplied by vdd_0v85_s0
[    2.974549] vdd_0v85_s0: could not add device link regulator.38: -ENOENT
[    2.974594] pcie20_avdd0v85: 850 mV, enabled
[    2.974750] reg-fixed-voltage pcie20-avdd0v85: pcie20_avdd0v85 supplying 850000uV
[    2.974862] reg-fixed-voltage pcie20-avdd1v8: Looking up vin-supply from device tree
[    2.974913] pcie20_avdd1v8: supplied by avcc_1v8_s0
[    2.974925] avcc_1v8_s0: could not add device link regulator.39: -ENOENT
[    2.974959] pcie20_avdd1v8: 1800 mV, enabled
[    2.975114] reg-fixed-voltage pcie20-avdd1v8: pcie20_avdd1v8 supplying 1800000uV
[    2.975223] reg-fixed-voltage pcie30-avdd0v75: Looking up vin-supply from device tree
[    2.975272] pcie30_avdd0v75: supplied by avdd_0v75_s0
[    2.975288] avdd_0v75_s0: could not add device link regulator.40: -ENOENT
[    2.975320] pcie30_avdd0v75: 750 mV, enabled
[    2.975478] reg-fixed-voltage pcie30-avdd0v75: pcie30_avdd0v75 supplying 750000uV
[    2.975586] reg-fixed-voltage pcie30-avdd1v8: Looking up vin-supply from device tree
[    2.975601] pcie30_avdd1v8: supplied by avcc_1v8_s0
[    2.975613] avcc_1v8_s0: could not add device link regulator.41: -ENOENT
[    2.975644] pcie30_avdd1v8: 1800 mV, enabled
[    2.975800] reg-fixed-voltage pcie30-avdd1v8: pcie30_avdd1v8 supplying 1800000uV
[    2.975970] reg-fixed-voltage vcc3v3-lcd0-n: Looking up vin-supply from device tree
[    2.975986] vcc3v3_lcd0_n: supplied by vcc_1v8_s0
[    2.975998] vcc_1v8_s0: could not add device link regulator.42: -ENOENT
[    2.976036] vcc3v3_lcd0_n: at 1800 mV, enabled
[    2.976188] reg-fixed-voltage vcc3v3-lcd0-n: vcc3v3_lcd0_n supplying 0uV
[    2.977152] rk-pcie fe150000.pcie: invalid prsnt-gpios property in node
[    2.977170] rk-pcie fe150000.pcie: Looking up vpcie3v3-supply from device tree
[    2.977469] input: adc-keys as /devices/platform/adc-keys/input/input1
[    2.982761] debugfs: File 'Capture' in directory 'dapm' already present!
[    2.983562] input: rockchip-hdmi0 rockchip-hdmi0 as /devices/platform/hdmi0-sound/sound/card1/input2
[    2.994033] rk-pcie fe150000.pcie: missing legacy IRQ resource
[    2.994067] rk-pcie fe150000.pcie: IRQ msi not found
[    2.994078] rk-pcie fe150000.pcie: use outband MSI support
[    2.994088] rk-pcie fe150000.pcie: Missing *config* reg space
[    2.994110] rk-pcie fe150000.pcie: host bridge /pcie@fe150000 ranges:
[    2.994140] rk-pcie fe150000.pcie:      err 0x00f0000000..0x00f00fffff -> 0x00f0000000
[    2.994161] rk-pcie fe150000.pcie:       IO 0x00f0100000..0x00f01fffff -> 0x00f0100000
[    2.994184] rk-pcie fe150000.pcie:      MEM 0x00f0200000..0x00f0ffffff -> 0x00f0200000
[    2.994200] rk-pcie fe190000.pcie: invalid prsnt-gpios property in node
[    2.994209] rk-pcie fe150000.pcie:      MEM 0x0900000000..0x093fffffff -> 0x0900000000
[    2.994220] rk-pcie fe190000.pcie: Looking up vpcie3v3-supply from device tree
[    2.994252] rk-pcie fe150000.pcie: Missing *config* reg space
[    2.994295] rk-pcie fe150000.pcie: invalid resource
[    2.995163] rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up sdio-supply from device tree
[    2.995197] rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up sdio-supply property in node /power-management@fd8d8000/power-controller failed
[    2.995534] [dhd] _dhd_module_init: in Dongle Host Driver, version 101.10.361.11 (wlan=r892223-20210630-1)
               drivers/net/wireless/rockchip_wlan/rkwifi/bcmdhd compiled on Nov 30 2023 at 09:59:05

[    2.995602] [dhd] ======== dhd_wlan_init_plat_data ========
[    2.995613] [WLAN_RFKILL]: rockchip_wifi_get_oob_irq: Enter
[    2.995672] [dhd] dhd_wlan_init_gpio: WL_HOST_WAKE=-1, oob_irq=151, oob_irq_flags=0x411
[    2.995682] [dhd] dhd_wlan_init_gpio: WL_REG_ON=-1
[    2.995690] [dhd] dhd_wifi_platform_load: Enter
[    2.995802] [dhd] _dhd_module_init: Exit err=0
[    2.995897] rkcif rkcif-mipi-lvds2: clear unready subdev num: 0
[    2.996867] dwmmc_rockchip fe2c0000.mmc: Successfully tuned phase to 47
[    2.996891] mmc0: new ultra high speed SDR104 SDXC card at address 0001
[    2.996919] RKNPU fdab0000.npu: Adding to iommu group 0
[    2.997083] RKNPU fdab0000.npu: RKNPU: rknpu iommu is enabled, using iommu mode
[    2.997180] RKNPU fdab0000.npu: Looking up rknpu-supply from device tree
[    2.997598] mmcblk0: mmc0:0001 SD128 117 GiB
[    2.998301] rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up npu-supply from device tree
[    2.998375] rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up npu-supply property in node /power-management@fd8d8000/power-controller failed
[    2.998646] rk-pcie fe190000.pcie: missing legacy IRQ resource
[    2.998671] rk-pcie fe190000.pcie: IRQ msi not found
[    2.998680] rk-pcie fe190000.pcie: use outband MSI support
[    2.998691] rk-pcie fe190000.pcie: Missing *config* reg space
[    2.998708] rk-pcie fe190000.pcie: host bridge /pcie@fe190000 ranges:
[    2.998738] rk-pcie fe190000.pcie:      err 0x00f4000000..0x00f40fffff -> 0x00f4000000
[    2.998757] rk-pcie fe190000.pcie:       IO 0x00f4100000..0x00f41fffff -> 0x00f4100000
[    2.998778] RKNPU fdab0000.npu: Looking up mem-supply from device tree
[    2.998784] rk-pcie fe190000.pcie:      MEM 0x00f4200000..0x00f4ffffff -> 0x00f4200000
[    2.998796] rk-pcie fe190000.pcie:      MEM 0x0a00000000..0x0a3fffffff -> 0x0a00000000
[    2.998860] rk-pcie fe190000.pcie: Missing *config* reg space
[    2.998926] rk-pcie fe190000.pcie: invalid resource
[    2.999122] RKNPU fdab0000.npu: can't request region for resource [mem 0xfdab0000-0xfdabffff]
[    2.999168] RKNPU fdab0000.npu: can't request region for resource [mem 0xfdac0000-0xfdacffff]
[    2.999191] RKNPU fdab0000.npu: can't request region for resource [mem 0xfdad0000-0xfdadffff]
[    3.000083] [drm] Initialized rknpu 0.6.4 20211227 for fdab0000.npu on minor 1
[    3.000686] rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up nputop-supply from device tree
[    3.000727] rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up nputop-supply property in node /power-management@fd8d8000/power-controller failed
[    3.000810] rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up npu1-supply from device tree
[    3.000843] rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up npu1-supply property in node /power-management@fd8d8000/power-controller failed
[    3.000914] rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up npu2-supply from device tree
[    3.000945] rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up npu2-supply property in node /power-management@fd8d8000/power-controller failed
[    3.001076] RKNPU fdab0000.npu: Looking up rknpu-supply from device tree
[    3.001104] vdd_npu_s0: could not add device link fdab0000.npu: -EEXIST
[    3.001110] vdd_npu_s0: Failed to create debugfs directory
[    3.001371] RKNPU fdab0000.npu: Looking up mem-supply from device tree
[    3.001410] vdd_npu_s0: could not add device link fdab0000.npu: -EEXIST
[    3.001415] vdd_npu_s0: Failed to create debugfs directory
[    3.001817] RKNPU fdab0000.npu: Failed to get npu_leakage
[    3.001862] RKNPU fdab0000.npu: Looking up rknpu-supply from device tree
[    3.001895] vdd_npu_s0: could not add device link fdab0000.npu: -EEXIST
[    3.001900] vdd_npu_s0: Failed to create debugfs directory
[    3.002175]  mmcblk0: p1
[    3.004870] RKNPU fdab0000.npu: pvtm=862
[    3.006194] RKNPU fdab0000.npu: pvtm-volt-sel=1
[    3.007253] RKNPU fdab0000.npu: avs=0
[    3.007501] RKNPU fdab0000.npu: l=0 h=2147483647 hyst=5000 l_limit=0 h_limit=0 h_table=0
[    3.023511] RKNPU fdab0000.npu: failed to find power_model node
[    3.023524] RKNPU fdab0000.npu: RKNPU: failed to initialize power model
[    3.023529] RKNPU fdab0000.npu: RKNPU: failed to get dynamic-coefficient
[    3.023782] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[    3.029246] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[    3.030816] cfg80211: loaded regulatory.db is malformed or signature is missing/invalid
[    3.031053] rockchip-pm rockchip-suspend: not set pwm-regulator-config
[    3.031547] I : [File] : drivers/gpu/arm/mali400/mali/linux/mali_kernel_linux.c; [Line] : 409; [Func] : mali_module_init(); svn_rev_string_from_arm of this mali_ko is '', rk_ko_ver is '5', built at '09:58:16', on 'Nov 30 2023'.
[    3.031756] Mali:
[    3.031758] Mali device driver loaded
[    3.031765] ALSA device list:
[    3.031770]   #0: rockchip,wm8904
[    3.031774]   #1: rockchip-hdmi0
[    3.034036] Freeing unused kernel memory: 1600K
[    3.060739] Run /init as init process
[    3.060759]   with arguments:
[    3.060763]     /init
[    3.060766]   with environment:
[    3.060770]     HOME=/
[    3.060773]     TERM=linux
[    3.259385] iwlwifi 0002:21:00.0 wlP2p33s0: renamed from wlan0
[    3.597443] dwmmc_rockchip fe2c0000.mmc: Successfully tuned phase to 205
[    3.790074] EXT4-fs (mmcblk1p5): mounted filesystem with ordered data mode. Opts: (null)
[    4.046500] systemd[1]: Failed to find module 'autofs4'
[    4.063298] systemd[1]: systemd 245.4-4ubuntu4.13 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
[    4.064142] systemd[1]: Detected architecture arm64.
[    4.065961] systemd[1]: Set hostname to <nvidia>.
[    4.472720] systemd[1]: system-modprobe.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling.
[    4.472759] systemd[1]: (This warning is only shown for the first unit using IP firewalling.)
[    4.473758] systemd[1]: Created slice system-modprobe.slice.
[    4.474822] systemd[1]: Created slice system-serial\x2dgetty.slice.
[    4.475735] systemd[1]: Created slice User and Session Slice.
[    4.476458] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    4.477258] systemd[1]: Condition check resulted in Arbitrary Executable File Formats File System Automount Point being skipped.
[    4.477394] systemd[1]: Reached target Remote File Systems.
[    4.477887] systemd[1]: Reached target Slices.
[    4.478335] systemd[1]: Reached target Mounting snaps.
[    4.478812] systemd[1]: Reached target Mounted snaps.
[    4.479314] systemd[1]: Reached target Swap.
[    4.480098] systemd[1]: Listening on Syslog Socket.
[    4.480679] systemd[1]: Listening on initctl Compatibility Named Pipe.
[    4.486356] systemd[1]: Condition check resulted in Journal Audit Socket being skipped.
[    4.486666] systemd[1]: Listening on Journal Socket (/dev/log).
[    4.487542] systemd[1]: Listening on Journal Socket.
[    4.488341] systemd[1]: Listening on udev Control Socket.
[    4.488977] systemd[1]: Listening on udev Kernel Socket.
[    4.489757] systemd[1]: Condition check resulted in Huge Pages File System being skipped.
[    4.489938] systemd[1]: Condition check resulted in POSIX Message Queue File System being skipped.
[    4.491440] systemd[1]: Mounting Kernel Debug File System...
[    4.493282] systemd[1]: Mounting Kernel Trace File System...
[    4.495767] systemd[1]: Starting Journal Service...
[    4.497832] systemd[1]: Starting Set the console keyboard layout...
[    4.498518] systemd[1]: Condition check resulted in Create list of static device nodes for the current kernel being skipped.
[    4.499906] systemd[1]: Starting Load Kernel Module chromeos_pstore...
[    4.500066] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped.
[    4.501106] systemd[1]: Starting Load Kernel Module efi_pstore...
[    4.502608] systemd[1]: Starting Load Kernel Module pstore_blk...
[    4.503942] systemd[1]: Starting Load Kernel Module pstore_zone...
[    4.504168] systemd[1]: Condition check resulted in Load Kernel Module ramoops being skipped.
[    4.506997] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
[    4.508796] systemd[1]: Starting Load Kernel Modules...
[    4.510192] systemd[1]: Starting Remount Root and Kernel File Systems...
[    4.511788] systemd[1]: Starting udev Coldplug all Devices...
[    4.517420] systemd[1]: Mounted Kernel Debug File System.
[    4.517684] systemd[1]: Mounted Kernel Trace File System.
[    4.518290] systemd[1]: modprobe@chromeos_pstore.service: Succeeded.
[    4.518469] systemd[1]: Finished Load Kernel Module chromeos_pstore.
[    4.523406] systemd[1]: modprobe@efi_pstore.service: Succeeded.
[    4.523695] systemd[1]: Finished Load Kernel Module efi_pstore.
[    4.525295] systemd[1]: modprobe@pstore_blk.service: Succeeded.
[    4.525505] systemd[1]: Finished Load Kernel Module pstore_blk.
[    4.525939] systemd[1]: modprobe@pstore_zone.service: Succeeded.
[    4.526127] systemd[1]: Finished Load Kernel Module pstore_zone.
[    4.526619] systemd[1]: Finished Load Kernel Modules.
[    4.527102] systemd[1]: Finished Remount Root and Kernel File Systems.
[    4.528395] systemd[1]: Mounting FUSE Control File System...
[    4.529356] systemd[1]: Mounting Kernel Configuration File System...
[    4.529978] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
[    4.530043] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
[    4.530884] systemd[1]: Starting Load/Save Random Seed...
[    4.531687] systemd[1]: Starting Apply Kernel Variables...
[    4.532518] systemd[1]: Starting Create System Users...
[    4.534302] systemd[1]: Mounted FUSE Control File System.
[    4.534865] systemd[1]: Mounted Kernel Configuration File System.
[    4.546571] systemd[1]: Finished Load/Save Random Seed.
[    4.549275] systemd[1]: Finished Create System Users.
[    4.550667] systemd[1]: Starting Create Static Device Nodes in /dev...
[    4.553031] systemd[1]: Finished Apply Kernel Variables.
[    4.572776] systemd[1]: Finished Create Static Device Nodes in /dev.
[    4.574881] systemd[1]: Starting udev Kernel Device Manager...
[    4.619643] systemd[1]: Finished Set the console keyboard layout.
[    4.619914] systemd[1]: Reached target Local File Systems (Pre).
[    4.620371] systemd[1]: Reached target Local File Systems.
[    4.620993] systemd[1]: Condition check resulted in Load AppArmor profiles being skipped.
[    4.622058] systemd[1]: Starting Enable support for additional executable binary formats...
[    4.623501] systemd[1]: Starting Set console font and keymap...
[    4.625107] systemd[1]: Starting Tell Plymouth To Write Out Runtime Data...
[    4.625309] systemd[1]: Condition check resulted in Load AppArmor profiles managed internally by snapd being skipped.
[    4.625381] systemd[1]: Condition check resulted in Store a System Token in an EFI Variable being skipped.
[    4.625422] systemd[1]: Condition check resulted in Commit a transient machine-id on disk being skipped.
[    4.630906] systemd[1]: Finished Enable support for additional executable binary formats.
[    4.631474] systemd[1]: Started Journal Service.
[    4.641413] systemd-journald[337]: Received client request to flush runtime journal.
[    4.647647] systemd-journald[337]: File /var/log/journal/f1934628ed114bd8b78494aa15770aa5/system.journal corrupted or uncleanly shut down, renaming and replacing.
[    4.728036] rk_hdmirx fdee0000.hdmirx-controller: hdmirx_cancel_cpu_limit_freq freq qos nod add
[    4.915856] dwmmc_rockchip fe2c0000.mmc: All phases bad!
[    4.915861] mmc0: tuning execution failed: -5
[    4.918336] vccio_sd_s0: ramp_delay not set
[    4.930346] mmc_host mmc0: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
[    4.963966] vccio_sd_s0: ramp_delay not set
[    5.110293] rk-pcie fe180000.pcie: PCIe Link Fail
[    5.110303] rk-pcie fe180000.pcie: failed to initialize host
[    5.141186] dwmac4: Master AXI performs any burst length
[    5.141208] rk_gmac-dwmac fe1b0000.ethernet eth0: No Safety Features support found
[    5.141221] rk_gmac-dwmac fe1b0000.ethernet eth0: IEEE 1588-2008 Advanced Timestamp supported
[    5.141365] rk_gmac-dwmac fe1b0000.ethernet eth0: registered PTP clock
[    5.141646] rk_gmac-dwmac fe1b0000.ethernet eth0: configuring for fixed/rgmii-rxid link mode
[    5.142179] rk_gmac-dwmac fe1b0000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off
[    5.142227] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[    5.265164] file system registered
[    5.384824] read descriptors
[    5.384834] read strings
[    5.402562] rockchip_canfd fea60000.can can0: bit-timing not yet defined
[    5.404893] rockchip_canfd fea60000.can can0: bit-timing not yet defined
[    5.460697] wm8904 3-001a: ASoC: error at snd_soc_component_update_bits on wm8904.3-001a: -16
[    5.461535] wm8904 3-001a: ASoC: error at snd_soc_component_update_bits on wm8904.3-001a: -16
[    5.893850] Filesystem uses "xz" compression. This is not supported
[    5.910378] rk-pcie fe190000.pcie: PCIe Link Fail
[    5.910407] rk-pcie fe190000.pcie: failed to initialize host
[    5.930819] rk-pcie fe150000.pcie: PCIe Link Fail
[    5.930836] rk-pcie fe150000.pcie: failed to initialize host
[    5.934402] rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up pcie-supply from device tree
[    5.934435] rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up pcie-supply property in node /power-management@fd8d8000/power-controller failed
[    5.969646] iwlwifi 0002:21:00.0: Applying debug destination EXTERNAL_DRAM
[    6.013644] usb 1-1: new high-speed USB device number 2 using ehci-platform
[    6.013686] usb 7-1: new high-speed USB device number 2 using xhci-hcd
[    6.104074] iwlwifi 0002:21:00.0: Applying debug destination EXTERNAL_DRAM
[    6.154291] usb 7-1: New USB device found, idVendor=0424, idProduct=2744, bcdDevice= 2.21
[    6.154299] usb 7-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    6.154303] usb 7-1: Product: USB2744
[    6.154307] usb 7-1: Manufacturer: Microchip Tech
[    6.161897] usb 1-1: New USB device found, idVendor=0424, idProduct=2744, bcdDevice= 2.21
[    6.161905] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    6.161908] usb 1-1: Product: USB2744
[    6.161912] usb 1-1: Manufacturer: Microchip Tech
[    6.162875] hub 1-1:1.0: USB hub found
[    6.163269] hub 1-1:1.0: 5 ports detected
[    6.168708] iwlwifi 0002:21:00.0: FW already configured (0) - re-configuring
[    6.200120] hub 7-1:1.0: USB hub found
[    6.200558] hub 7-1:1.0: 5 ports detected
[    6.277046] usb 8-1: new SuperSpeed Gen 1 USB device number 2 using xhci-hcd
[    6.294182] usb 8-1: New USB device found, idVendor=0424, idProduct=5744, bcdDevice= 2.21
[    6.294192] usb 8-1: New USB device strings: Mfr=2, Product=3, SerialNumber=0
[    6.294197] usb 8-1: Product: USB5744
[    6.294202] usb 8-1: Manufacturer: Microchip Tech
[    6.312067] hub 8-1:1.0: USB hub found
[    6.312135] hub 8-1:1.0: 4 ports detected
[    6.446979] usb 1-1.1: new high-speed USB device number 3 using ehci-platform
[    6.544999] usb 1-1.1: New USB device found, idVendor=1a40, idProduct=0101, bcdDevice= 1.11
[    6.545014] usb 1-1.1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    6.545022] usb 1-1.1: Product: USB 2.0 Hub
[    6.546708] hub 1-1.1:1.0: USB hub found
[    6.547014] usb 7-1.1: new high-speed USB device number 3 using xhci-hcd
[    6.547816] hub 1-1.1:1.0: 4 ports detected
[    6.637045] usb 1-1.3: new high-speed USB device number 4 using ehci-platform
[    6.640708] usb 7-1.1: New USB device found, idVendor=1a40, idProduct=0101, bcdDevice= 1.11
[    6.640721] usb 7-1.1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    6.640730] usb 7-1.1: Product: USB 2.0 Hub
[    6.679762] hub 7-1.1:1.0: USB hub found
[    6.679806] hub 7-1.1:1.0: 4 ports detected
[    6.741401] usb 1-1.3: New USB device found, idVendor=1a40, idProduct=0101, bcdDevice= 1.11
[    6.741410] usb 1-1.3: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    6.741415] usb 1-1.3: Product: USB 2.0 Hub
[    6.742586] hub 1-1.3:1.0: USB hub found
[    6.743221] hub 1-1.3:1.0: 4 ports detected
[    6.756971] usb 7-1.2: new high-speed USB device number 4 using xhci-hcd
[    6.820362] usb 1-1.5: new high-speed USB device number 5 using ehci-platform
[    6.847609] usb 7-1.2: New USB device found, idVendor=1a40, idProduct=0101, bcdDevice= 1.11
[    6.847615] usb 7-1.2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    6.847618] usb 7-1.2: Product: USB 2.0 Hub
[    6.903952] hub 7-1.2:1.0: USB hub found
[    6.904062] hub 7-1.2:1.0: 4 ports detected
[    6.919772] usb 1-1.5: New USB device found, idVendor=0424, idProduct=2740, bcdDevice= 2.00
[    6.919796] usb 1-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    6.919812] usb 1-1.5: Product: Hub Controller
[    6.919827] usb 1-1.5: Manufacturer: Microchip Tech
[    7.077157] usb 7-1.1.3: new high-speed USB device number 5 using xhci-hcd
[    7.090502] usb 1-1.1.3: new high-speed USB device number 6 using ehci-platform
[    7.280759] usb 7-1.1.3: New USB device found, idVendor=2bc5, idProduct=0561, bcdDevice= 1.00
[    7.280785] usb 7-1.1.3: New USB device strings: Mfr=2, Product=1, SerialNumber=3
[    7.280801] usb 7-1.1.3: Product: Orbbec DaBai DCW2 RGB Camera
[    7.280816] usb 7-1.1.3: Manufacturer: Sonix Technology Co., Ltd.
[    7.280830] usb 7-1.1.3: SerialNumber: AUIT73D0026
[    7.301035] usb 1-1.1.3: New USB device found, idVendor=2bc5, idProduct=0561, bcdDevice= 1.00
[    7.301059] usb 1-1.1.3: New USB device strings: Mfr=2, Product=1, SerialNumber=3
[    7.301075] usb 1-1.1.3: Product: Orbbec DaBai DCW2 RGB Camera
[    7.301090] usb 1-1.1.3: Manufacturer: Sonix Technology Co., Ltd.
[    7.301104] usb 1-1.1.3: SerialNumber: AUIT73D000S
[    7.305418] uvcvideo: Found UVC 1.00 device Orbbec DaBai DCW2 RGB Camera (2bc5:0561)
[    7.307411] uvcvideo: Failed to query (GET_INFO) UVC control 7 on unit 1: 0 (exp. 1).
[    7.307868] uvcvideo: Failed to query (GET_INFO) UVC control 9 on unit 1: 0 (exp. 1).
[    7.308255] uvcvideo: Failed to query (GET_INFO) UVC control 10 on unit 1: 0 (exp. 1).
[    7.308624] uvcvideo: Failed to query (GET_INFO) UVC control 12 on unit 1: 0 (exp. 1).
[    7.308994] uvcvideo: Failed to query (GET_INFO) UVC control 14 on unit 1: 0 (exp. 1).
[    7.309745] uvcvideo: Failed to query (GET_INFO) UVC control 16 on unit 1: 0 (exp. 1).
[    7.322605] uvcvideo: Found UVC 1.00 device Orbbec DaBai DCW2 RGB Camera (2bc5:0561)
[    7.324243] uvcvideo: Failed to query (GET_INFO) UVC control 7 on unit 1: 0 (exp. 1).
[    7.324521] uvcvideo: Failed to query (GET_INFO) UVC control 9 on unit 1: 0 (exp. 1).
[    7.325239] uvcvideo: Failed to query (GET_INFO) UVC control 10 on unit 1: 0 (exp. 1).
[    7.325830] uvcvideo: Failed to query (GET_INFO) UVC control 12 on unit 1: 0 (exp. 1).
[    7.326085] uvcvideo: Failed to query (GET_INFO) UVC control 14 on unit 1: 0 (exp. 1).
[    7.327688] uvcvideo: Failed to query (GET_INFO) UVC control 16 on unit 1: 0 (exp. 1).
[    7.343655] usb 7-1.3: new high-speed USB device number 6 using xhci-hcd
[    7.435181] usb 7-1.3: New USB device found, idVendor=1a40, idProduct=0101, bcdDevice= 1.11
[    7.435194] usb 7-1.3: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    7.435202] usb 7-1.3: Product: USB 2.0 Hub
[    7.463926] usb 1-1.3.3: new high-speed USB device number 7 using ehci-platform
[    7.480237] hub 7-1.3:1.0: USB hub found
[    7.480395] hub 7-1.3:1.0: 4 ports detected
[    7.607206] usb 7-1.2.1: new high-speed USB device number 7 using xhci-hcd
[    7.677395] usb 1-1.3.3: New USB device found, idVendor=2bc5, idProduct=0561, bcdDevice= 1.00
[    7.677417] usb 1-1.3.3: New USB device strings: Mfr=2, Product=1, SerialNumber=3
[    7.677432] usb 1-1.3.3: Product: Orbbec DaBai DCW2 RGB Camera
[    7.677447] usb 1-1.3.3: Manufacturer: Sonix Technology Co., Ltd.
[    7.677461] usb 1-1.3.3: SerialNumber: AUIT73D0012
[    7.681171] uvcvideo: Found UVC 1.00 device Orbbec DaBai DCW2 RGB Camera (2bc5:0561)
[    7.682700] uvcvideo: Failed to query (GET_INFO) UVC control 7 on unit 1: 0 (exp. 1).
[    7.682999] uvcvideo: Failed to query (GET_INFO) UVC control 9 on unit 1: 0 (exp. 1).
[    7.683242] uvcvideo: Failed to query (GET_INFO) UVC control 10 on unit 1: 0 (exp. 1).
[    7.683537] uvcvideo: Failed to query (GET_INFO) UVC control 12 on unit 1: 0 (exp. 1).
[    7.683824] uvcvideo: Failed to query (GET_INFO) UVC control 14 on unit 1: 0 (exp. 1).
[    7.684369] uvcvideo: Failed to query (GET_INFO) UVC control 16 on unit 1: 0 (exp. 1).
[    7.837201] usb 1-1.1.1: new high-speed USB device number 8 using ehci-platform
[    9.748524] usb 7-1.2.1: New USB device found, idVendor=2bc5, idProduct=06a0, bcdDevice= 0.01
[    9.748551] usb 7-1.2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=9
[    9.748567] usb 7-1.2.1: Product: ORBBEC Depth Sensor
[    9.748582] usb 7-1.2.1: Manufacturer: Orbbec(R)
[    9.748596] usb 7-1.2.1: SerialNumber: AUIT73D000Y
[    9.755409] usb 1-1.1.1: New USB device found, idVendor=2bc5, idProduct=06a0, bcdDevice= 0.01
[    9.755434] usb 1-1.1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=9
[    9.755450] usb 1-1.1.1: Product: ORBBEC Depth Sensor
[    9.755465] usb 1-1.1.1: Manufacturer: Orbbec(R)
[    9.755479] usb 1-1.1.1: SerialNumber: AUIT73D000S
[    9.920522] usb 7-1.1.1: new high-speed USB device number 8 using xhci-hcd
[    9.927023] usb 1-1.3.1: new high-speed USB device number 9 using ehci-platform
[   10.111476] usb 7-1.1.1: New USB device found, idVendor=2bc5, idProduct=06a0, bcdDevice= 0.01
[   10.111503] usb 7-1.1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=9
[   10.111520] usb 7-1.1.1: Product: ORBBEC Depth Sensor
[   10.111534] usb 7-1.1.1: Manufacturer: Orbbec(R)
[   10.111549] usb 7-1.1.1: SerialNumber: AUIT73D0026
[   10.125594] usb 1-1.3.1: New USB device found, idVendor=2bc5, idProduct=06a0, bcdDevice= 0.01
[   10.125613] usb 1-1.3.1: New USB device strings: Mfr=1, Product=2, SerialNumber=9
[   10.125624] usb 1-1.3.1: Product: ORBBEC Depth Sensor
[   10.125634] usb 1-1.3.1: Manufacturer: Orbbec(R)
[   10.125643] usb 1-1.3.1: SerialNumber: AUIT73D0012
[   10.183766] usb 7-1.4: new high-speed USB device number 9 using xhci-hcd
[   10.285934] usb 7-1.4: New USB device found, idVendor=1508, idProduct=1001, bcdDevice= 3.18
[   10.285950] usb 7-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[   10.285959] usb 7-1.4: Product: Fibocom Modem
[   10.285966] usb 7-1.4: Manufacturer: Fibocom Wireless Inc.
[   10.285972] usb 7-1.4: SerialNumber: da2427
[   10.425005] gobiusbnet usb serial net begin
[   10.425052] GobiNet::3331::GobiUSBNetProbe usbnet_probe failed -19
[   10.425357] option 7-1.4:1.0: GSM modem (1-port) converter detected
[   10.425692] usb 7-1.4: GSM modem (1-port) converter now attached to ttyUSB0
[   10.425983] gobiusbnet usb serial net begin
[   10.426008] GobiNet::3331::GobiUSBNetProbe usbnet_probe failed -19
[   10.426287] option 7-1.4:1.1: GSM modem (1-port) converter detected
[   10.426539] usb 7-1.4: GSM modem (1-port) converter now attached to ttyUSB1
[   10.426831] gobiusbnet usb serial net begin
[   10.426852] GobiNet::3331::GobiUSBNetProbe usbnet_probe failed -19
[   10.427169] option 7-1.4:1.2: GSM modem (1-port) converter detected
[   10.427635] usb 7-1.4: GSM modem (1-port) converter now attached to ttyUSB2
[   10.428024] gobiusbnet usb serial net begin
[   10.428058] GobiNet::3331::GobiUSBNetProbe usbnet_probe failed -19
[   10.428358] option 7-1.4:1.3: GSM modem (1-port) converter detected
[   10.428827] usb 7-1.4: GSM modem (1-port) converter now attached to ttyUSB3
[   10.433468] cdc_ether 7-1.4:1.4 wwan0: register 'cdc_ether' at usb-xhci-hcd.5.auto-1.4, CDC Ethernet Device, 92:22:72:76:8b:d1
[   10.435134] gobiusbnet usb serial net begin
[   10.435156] GobiNet::3331::GobiUSBNetProbe usbnet_probe failed -19
[   10.447052] usb 7-1.3.1: new high-speed USB device number 10 using xhci-hcd
[   10.638618] usb 7-1.3.1: New USB device found, idVendor=2bc5, idProduct=06a0, bcdDevice= 0.01
[   10.638646] usb 7-1.3.1: New USB device strings: Mfr=1, Product=2, SerialNumber=9
[   10.638662] usb 7-1.3.1: Product: ORBBEC Depth Sensor
[   10.638677] usb 7-1.3.1: Manufacturer: Orbbec(R)
[   10.638691] usb 7-1.3.1: SerialNumber: AUISA3P002N
[   10.810515] usb 7-1.2.3: new high-speed USB device number 11 using xhci-hcd
[   11.013390] usb 7-1.2.3: New USB device found, idVendor=2bc5, idProduct=0561, bcdDevice= 1.00
[   11.013418] usb 7-1.2.3: New USB device strings: Mfr=2, Product=1, SerialNumber=3
[   11.013434] usb 7-1.2.3: Product: Orbbec DaBai DCW2 RGB Camera
[   11.013449] usb 7-1.2.3: Manufacturer: Sonix Technology Co., Ltd.
[   11.013464] usb 7-1.2.3: SerialNumber: AUIT73D000Y
[   11.067491] uvcvideo: Found UVC 1.00 device Orbbec DaBai DCW2 RGB Camera (2bc5:0561)
[   11.068946] uvcvideo: Failed to query (GET_INFO) UVC control 7 on unit 1: 0 (exp. 1).
[   11.069281] uvcvideo: Failed to query (GET_INFO) UVC control 9 on unit 1: 0 (exp. 1).
[   11.069535] uvcvideo: Failed to query (GET_INFO) UVC control 10 on unit 1: 0 (exp. 1).
[   11.069833] uvcvideo: Failed to query (GET_INFO) UVC control 12 on unit 1: 0 (exp. 1).
[   11.070162] uvcvideo: Failed to query (GET_INFO) UVC control 14 on unit 1: 0 (exp. 1).
[   11.070706] uvcvideo: Failed to query (GET_INFO) UVC control 16 on unit 1: 0 (exp. 1).
[   11.073904] usb 7-1.5: new high-speed USB device number 12 using xhci-hcd
[   11.169396] usb 7-1.5: New USB device found, idVendor=0424, idProduct=2740, bcdDevice= 2.00
[   11.169410] usb 7-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[   11.169418] usb 7-1.5: Product: Hub Controller
[   11.169425] usb 7-1.5: Manufacturer: Microchip Tech
[   11.347075] usb 7-1.3.3: new high-speed USB device number 13 using xhci-hcd
[   11.369001] usbcore: registered new interface driver cdc_wdm
[   11.549319] usb 7-1.3.3: New USB device found, idVendor=2bc5, idProduct=0561, bcdDevice= 1.00
[   11.549338] usb 7-1.3.3: New USB device strings: Mfr=2, Product=1, SerialNumber=3
[   11.549350] usb 7-1.3.3: Product: Orbbec DaBai DCW2 RGB Camera
[   11.549360] usb 7-1.3.3: Manufacturer: Sonix Technology Co., Ltd.
[   11.549369] usb 7-1.3.3: SerialNumber: AUISA3P002N
[   11.610232] uvcvideo: Found UVC 1.00 device Orbbec DaBai DCW2 RGB Camera (2bc5:0561)
[   11.611755] uvcvideo: Failed to query (GET_INFO) UVC control 16 on unit 1: 0 (exp. 1).
[   11.986543] usbcore: registered new interface driver qmi_wwan
[   33.300579] vbus5v0_typec: disabling
[   33.300590] vcc_mipicsi0: disabling
[   33.300596] vcc_mipicsi1: disabling
[   33.300601] vcc_mipicsi1: disabling
[   33.300607] vcc_wm8904: disabling
[   33.300628] vcc3v3_pcie30: disabling
[   33.300633] vcc_3v3_sd_s0: disabling
[   33.300640] vcc3v3_lcd0_n: disabling
[   38.817119] Adding 1999996k swap on /opt/swapfile.  Priority:-2 extents:32 across:11132928k SS
[   46.956672] vccio_sd_s0: ramp_delay not set
[   47.004641] mmc_host mmc0: Bus speed (slot 0) = 49500000Hz (slot req 50000000Hz, actual 49500000HZ div = 0)
[   47.332913] rockchip_canfd fea60000.can can0: bit-timing not yet defined
[   47.336487] rockchip_canfd fea60000.can can0: bit-timing not yet defined
[   47.434363] systemd-journald[337]: File /var/log/journal/f1934628ed114bd8b78494aa15770aa5/user-1001.journal corrupted or uncleanly shut down, renaming and replacing.
[   47.453944] ttyFIQ ttyFIQ0: tty_port_close_start: tty->count = 1 port count = 2
[   47.745626] iwlwifi 0002:21:00.0 wlan0: renamed from wlP2p33s0
[   47.777548] squashfs: Unknown parameter 'uid'
[   47.777635] FAT-fs (mmcblk1p1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[   47.785402] IPv6: ADDRCONF(NETDEV_CHANGE): can0: link becomes ready
[   52.108018] of_dma_request_slave_channel: dma-names property of node '/serial@feb90000' missing or empty
[   52.108048] dw-apb-uart feb90000.serial: failed to request DMA, use interrupt mode
[  140.191826] android_work: did not send uevent (0 0 0000000000000000)
[  140.315437] android_work: did not send uevent (0 0 0000000000000000)
[  141.185322] android_work: did not send uevent (0 0 0000000000000000)
[14782.925660] EXT4-fs (mmcblk1p5): resizing filesystem from 3899392 to 7570427 blocks
[14783.094991] EXT4-fs (mmcblk1p5): resized filesystem to 7570427
[23093.441473] rcu: INFO: rcu_sched self-detected stall on CPU
[23093.441504] rcu:         0-....: (18005 ticks this GP) idle=49a/1/0x4000000000000008 softirq=2817564/2817566 fqs=5444
[23093.441512]         (t=18000 jiffies g=4600549 q=15920)
[23093.441516] Task dump for CPU 0:
[23093.441520] task:swapper/0       state:R  running task     stack:    0 pid:    0 ppid:     0 flags:0x0000000a
[23093.441529] Call trace:
[23093.441539]  dump_backtrace+0x0/0x1e4
[23093.441544]  show_stack+0x24/0x30
[23093.441550]  sched_show_task+0x13c/0x158
[23093.441554]  dump_cpu_task+0x50/0x60
[23093.441558]  rcu_dump_cpu_stacks+0xc4/0x128
[23093.441563]  rcu_sched_clock_irq+0x738/0x9ac
[23093.441568]  update_process_times+0x6c/0x94
[23093.441573]  tick_sched_handle+0x4c/0x60
[23093.441577]  tick_sched_timer+0x58/0x9c
[23093.441581]  __hrtimer_run_queues+0x1b8/0x2c8
[23093.441585]  hrtimer_interrupt+0xf8/0x234
[23093.441592]  arch_timer_handler_phys+0x44/0x54
[23093.441597]  handle_percpu_devid_irq+0xec/0x220
[23093.441601]  __handle_domain_irq+0x88/0xd4
[23093.441605]  gic_handle_irq+0x12c/0x3a4
[23093.441608]  el1_irq+0xcc/0x180
[23093.441614]  usb_giveback_urb_bh+0x9c/0x100
[23093.441619]  tasklet_action_common+0x1d0/0x39c
[23093.441623]  tasklet_hi_action+0x30/0x3c
[23093.441627]  __do_softirq+0x170/0x34c
[23093.441630]  irq_exit+0xa8/0xac
[23093.441634]  __handle_domain_irq+0x8c/0xd4
[23093.441638]  gic_handle_irq+0x12c/0x3a4
[23093.441641]  el1_irq+0xcc/0x180
[23093.441646]  cpuidle_enter_state+0x1d0/0x314
[23093.441650]  cpuidle_enter+0x44/0x5c
[23093.441654]  call_cpuidle+0x28/0x88
[23093.441658]  do_idle+0x1dc/0x280
[23093.441662]  cpu_startup_entry+0x30/0x34
[23093.441667]  rest_init+0xc8/0xd8
[23093.441672]  arch_call_rest_init+0x1c/0x28
[23093.441676]  start_kernel+0x460/0x4f4
[23155.104406] rcu: INFO: rcu_sched detected expedited stalls on CPUs/tasks: { 0-... } 18381 jiffies s: 261 root: 0x1/.
[23155.104432] rcu: blocking rcu_node structures:
[23155.104622] Task dump for CPU 0:
[23155.104625] task:swapper/0       state:R  running task     stack:    0 pid:    0 ppid:     0 flags:0x0000000a
[23155.104634] Call trace:
[23155.104643]  __switch_to+0x210/0x254
[23155.104647]  0x1

这log看不出具体原因，应该先查硬件，供电、散热、ddr是否正常