mkimage for u-boot, board rk3588

Trying to build u-boot for RK3588, using rkbin repo. But rk3588 is not supported.

tools/mkimage -n rk3588 -T rksd -d spl/u-boot-spl.bin idbspl.img

1. ERROR: imagename (rk3588) is not supported!
   
2. Available imagename:        rk3036        rk3066        rk3128        rk3188        rk322x        rk3288        rk3308        rk3328        rk3368        rk3399        px30        rv1108        rv1126        rk1808
   
3. Error: Bad parameters for image type
   
4. Usage: tools/mkimage -l image
   
5.           -l ==> list image header information
   
6.        tools/mkimage [-x] -A arch -O os -T type -C comp -a addr -e ep -n name -d data_file[:data_file...] image
   
7.           -A ==> set architecture to 'arch'
   
8.           -O ==> set operating system to 'os'
   
9.           -T ==> set image type to 'type'
   
10.           -C ==> set compression type 'comp'
    
11.           -a ==> set load address to 'addr' (hex)
    
12.           -e ==> set entry point to 'ep' (hex)
    
13.           -n ==> set image name to 'name'
    
14.           -d ==> use image data from 'datafile'
    
15.           -x ==> set XIP (execute in place)
    
16.        tools/mkimage [-D dtc_options] [-f fit-image.its|-f auto|-F] [-b <dtb> [-b <dtb>]] [-i <ramdisk.cpio.gz>] fit-image
    
17.            <dtb> file is used with -f auto, it may occur multiple times.
    
18.           -D => set all options for device tree compiler
    
19.           -f => input filename for FIT source
    
20.           -i => input filename for ramdisk file
    
21.           -v => set FIT image version in decimal
    
22. Signing / verified boot not supported (CONFIG_FIT_SIGNATURE undefined)
    
23.        tools/mkimage -V ==> print version information and exit
    
24. Use '-T list' to see a list of available image types
    

复制代码

Hi
How did you get the code?

Try it, it is the latest one.

Thanks for the reply. I am trying to build modified u-boot by following rockchip steps.

I tried the attached mkimage.zip file, still give the same error. It is the same one I use from rkbin repo.

I read make.sh in u-boot, and found it use the mkimage which is under uboot/tools/mkimage, not under rkbin folder.

jefferyzhang 发表于 2023-1-13 09:32
I read make.sh in u-boot, and found it use the mkimage which is under uboot/tools/mkimage, not under ...

Thanks!
I compiled u-boot and got the working mkimage.
Steps to build the tools:

1. git clone https://github.com/rockchip-linux/u-boot
   
2. make rk3588_defconfig
   
3. make tools-only
   
4. #use tools/mkimage

复制代码