|
串口log为以下信息,循环显示
DDR Version V1.04 20191121
LPDDR3
933MHz
BW=32 Col=11 Bk=8 CS0 Row=15 CS1 Row=15 CS=2 Die BW=32 Size=4096MB
out
Boot1 Release Time: Jul 19 2019 18:22:57, version: 1.04
ChipType = 0x14, 167
sfc_ver 3
sfc nor id: ff ff ff
sfc_nand_init
sfc_ver 3
sfc_nand id: ff ff ff
NeedKHz=200KHz,clock=12000KHz
NeedKHz=200KHz,clock=12000KHz
NeedKHz=200KHz,clock=12000KHz
NeedKHz=18000KHz,clock=192000KHz
NeedKHz=48000KHz,clock=192000KHz
mmc2:cmd19,100
SdmmcInit=2 0
BootCapSize=2000
UserCapSize=14910MB
FwPartOffset=2000 , 2000
SdmmcInit=0 NOT PRESENT
StorageInit ok = 10716
SecureMode = 0
Secure read PBA: 0x4
Secure read PBA: 0x404
Secure read PBA: 0x804
Secure read PBA: 0xc04
Secure read PBA: 0x1004
SecureInit ret = 0, SecureMode = 0
atags_set_bootdev: ret0)
GPT part: 0, name: uboot, start:0x2000, size:0x2000
GPT part: 1, name: trust, start:0x4000, size:0x2000
GPT part: 2, name: boot_linux, start:0x6000, size:0x20000
GPT part: 3, name: rootfs, start:0x26000, size:0x1cf8fdf
find part:uboot OK. first_lba:0x2000.
find part:trust OK. first_lba:0x4000.
LoadTrust Addr:0x4000
No find bl30.bin
Load uboot, ReadLba = 2000
Load OK, addr=0x600000, size=0xc9d34
RunBL31 0x10000
INFO: Preloader serial: 2
NOTICE: BL31: v1.3(debug):17814c8b1
NOTICE: BL31: Built : 18:02:20, Nov 25 2019
NOTICE: BL31: Rockchip release version: v1.0
INFO: GICv3 with legacy support detected. ARM GICV3 driver initialized in EL3
INFO: not boot from ram
INFO: Using opteed sec cpu_context!
INFO: boot cpu mask: 0
INFO: plat_rockchip_pmu_init(1802): pd status 8002
INFO: BL31: Initializing runtime services
INFO: BL31: Initializing BL32
I/TC:
I/TC: Start rockchip platform init
I/TC: Rockchip release version: 1.1
I/TC: OP-TEE version: 3.3.0-188-g62404fcc #46 Mon Nov 18 07:16:57 UTC 2019 aarc4
I/TC: Initialized
INFO: BL31: Preparing for EL3 exit to normal world
INFO: Entry point address = 0x600000
INFO: SPSR = 0x3c9
U-Boot 2017.09-00956-gff7673901c (Sep 08 2020 - 10:33:29 +0800)
Model: Rockchip RK1808 EVB
PreSerial: 2
DRAM: 3.9 GiB
Sysmem: init
Relocation Offset is: f57f8000
Using default environment
dwmmc@ffcf0000: 1, dwmmc@ffd00000: 0
Bootdev(atags): mmc 0
MMC0: High Speed, 52Mhz
PartType: EFI
rockchip_get_boot_mode: Could not found misc partition
boot mode: None
init_resource_list: failed to get boot part, ret=-1
init_resource_list: failed to get resource part, ret=-1
Distro DTB: /extlinux/toybrick.dtb
81635 bytes read in 16 ms (4.9 MiB/s)
Can't get crtc id, default set to id = 0
Model: Toybrick rk1808 compute module m0
toybrick_SnMacAc_check read ac id fail
Toybrick: SN(1110201931000005) check OK!
init_resource_list: failed to get boot part, ret=-1
init_resource_list: failed to get resource part, ret=-1
Can't find file:logo.bmp
failed to display uboot logo
CLK: (sync kernel. arm: enter 1200000 KHz, init 1200000 KHz, kernel 0N/A)
apll 1200000 KHz
dpll 462000 KHz
cpll 1000000 KHz
gpll 1188000 KHz
npll 24000 KHz
ppll 100000 KHz
hsclk_bus 297000 KHz
msclk_bus 198000 KHz
lsclk_bus 99000 KHz
msclk_peri 198000 KHz
lsclk_peri 99000 KHz
Net: No ethernet found.
Hit key to stop autoboot('CTRL+C'): 0
Could not find misc partition
ANDROID: reboot reason: "(none)"
load_android_image: Can't find part: boot
Android image load failed
Android boot failed, error -1.
do_boot_rockchip: Could not find misc partition
do_boot_rockchip: Could not find rootfs part
Card did not respond to voltage select!
mmc_init: -95, time 9
switch to partitions #0, OK
mmc0(part 0) is current device
Scanning mmc 0:3...
Found /extlinux/extlinux.conf
Retrieving file: /extlinux/extlinux.conf
237 bytes read in 10 ms (22.5 KiB/s)
1: rockchip-kernel-4.4
Retrieving file: /initramfs-toybrick-2.0.img
16097277 bytes read in 139 ms (110.4 MiB/s)
Retrieving file: /extlinux/Image
10682376 bytes read in 101 ms (100.9 MiB/s)
append: earlycon=uart8250,mmio32,0xff1a0000 initrd=/initramfs-toybrick-2.0.img 4
Retrieving file: /extlinux/toybrick.dtb
81635 bytes read in 13 ms (6 MiB/s)
## Flattened Device Tree blob at 01f00000
Booting using the fdt blob at 0x1f00000
'reserved-memory' region@110000: addr=110000 size=f0000
Loading Ramdisk to f2e8f000, end f3de8ffd ... OK
Loading Device Tree to 00000000f2e78000, end 00000000f2e8eee2 ... OK
Adding bank: 0x00600000 - 0xf8000000 (size: 0xf7a00000)
Total: 532.369 ms
Starting kernel ...
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 4.4.194 (kfx@inno) (gcc version 6.3.1 20170404 (Li0
[ 0.000000] Boot CPU: AArch64 Processor [410fd042]
[ 0.000000] earlycon: Early serial console at MMIO32 0xff550000 (options '')
[ 0.000000] bootconsole [uart0] enabled
[ 0.000000] Reserved memory: failed to reserve memory for node 'drm-logo@000B
[ 0.000000] cma: Reserved 128 MiB at 0x00000000eac00000
[ 0.000000] psci: probing for conduit method from DT.
[ 0.000000] psci: PSCIv1.0 detected in firmware.
[ 0.000000] psci: Using standard PSCI v0.2 function IDs
[ 0.000000] psci: Trusted OS migration not required
[ 0.000000] PERCPU: Embedded 19 pages/cpu @ffffffc0f7f55000 s40472 r8192 d294
[ 0.000000] Detected VIPT I-cache on CPU0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pa4
[ 0.000000] Kernel command line: earlycon=uart8250,mmio32,0xff550000 root=PA0
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 byte)
[ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.000000] software IO TLB: mapped [mem 0xf7f0d000-0xf7f4d000] (0MB)
[ 0.000000] Memory: 3827400K/4057088K available (6910K kernel code, 640K rwd)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 )
[ 0.000000] vmalloc : 0xffffff8008000000 - 0xffffffbdbfff0000 ( 246 )
[ 0.000000] .init : 0xffffff80089b0000 - 0xffffff8008a10000 ( 384 )
[ 0.000000] .text : 0xffffff8008080000 - 0xffffff8008740000 ( 6912 )
[ 0.000000] .rodata : 0xffffff8008740000 - 0xffffff80089b0000 ( 2496 )
[ 0.000000] .data : 0xffffff8008a10000 - 0xffffff8008ab0008 ( 641 )
[ 0.000000] fixed : 0xffffffbffe7fd000 - 0xffffffbffec00000 ( 4108 )
[ 0.000000] PCI I/O : 0xffffffbffee00000 - 0xffffffbfffe00000 ( 16 )
[ 0.000000] memory : 0xffffffc000600000 - 0xffffffc0f8000000 ( 3962 )
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 64.
[ 0.000000] NR_IRQS:64 nr_irqs:64 0
[ 0.000000] GIC: Using split EOI/Deactivate mode
[ 0.000000] ITS: /interrupt-controller@ff100000/interrupt-controller@ff120000
[ 0.000000] ITS: allocated 65536 Devices @ea400000 (psz 64K, shr 0)
[ 0.000000] ITS: using cache flushing for cmd queue
[ 0.000000] GIC: using LPI property table @0x0000000000620000
[ 0.000000] ITS: Allocated 1792 chunks for LPIs
[ 0.000000] CPU0: found redistributor 0 region 0:0x00000000ff140000
[ 0.000000] CPU0: using LPI pending table @0x0000000000630000
[ 0.000000] GIC: using cache flushing for LPI property table
[ 0.000000] Architected cp15 timer(s) running at 24.00MHz (phys).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycless
[ 0.000006] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398s
[ 0.001882] Console: colour dummy device 80x25
[ 0.002314] Calibrating delay loop (skipped), value calculated using timer f)
[ 0.003279] pid_max: default: 32768 minimum: 301
[ 0.003821] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.004459] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.005836] Initializing cgroup subsys devices
[ 0.006265] Initializing cgroup subsys freezer
[ 0.006950] sched-energy: CPU device node has no sched-energy-costs
[ 0.007538] Invalid sched_group_energy for CPU0
[ 0.007992] CPU0: update cpu_capacity 1024
[ 0.008413] ASID allocator initialised with 65536 entries
[ 0.014240] PCI/MSI: /interrupt-controller@ff100000/interrupt-controller@ff1d
[ 0.015427] Platform MSI: /interrupt-controller@ff100000/interrupt-controlled
[ 0.020755] Detected VIPT I-cache on CPU1
[ 0.020786] CPU1: found redistributor 1 region 0:0x00000000ff160000
[ 0.020813] CPU1: using LPI pending table @0x00000000ea580000
[ 0.020846] Invalid sched_group_energy for CPU1
[ 0.020851] CPU1: update cpu_capacity 1024
[ 0.020855] CPU1: Booted secondary processor [410fd042]
[ 0.020952] Brought up 2 CPUs
[ 0.024012] SMP: Total of 2 processors activated.
[ 0.024461] CPU features: detected feature: GIC system register CPU interface
[ 0.025121] CPU features: detected feature: 32-bit EL0 Support
[ 0.025673] CPU: All CPU(s) started at EL2
[ 0.026172] Invalid sched_group_energy for CPU1
[ 0.026596] Invalid sched_group_energy for Cluster1
[ 0.027063] Invalid sched_group_energy for CPU0
[ 0.027484] Invalid sched_group_energy for Cluster0
[ 0.028426] devtmpfs: initialized
[ 0.048189] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, ms
[ 0.049113] futex hash table entries: 512 (order: 3, 32768 bytes)
[ 0.056115] pinctrl core: initialized pinctrl subsystem
[ 0.057713] NET: Registered protocol family 16
[ 0.064607] cpuidle: using governor menu
[ 0.065010] Registered FIQ tty driver
[ 0.065682] vdso: 2 pages (1 code @ ffffff8008746000, 1 data @ ffffff8008a14)
[ 0.066396] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[ 0.067986] DMA: preallocated 1024 KiB pool for atomic allocations
[ 0.090818] console [pstore-1] enabled
[ 0.091200] pstore: Registered ramoops as persistent store backend
[ 0.091775] ramoops: attached 0xf0000@0x110000, ecc: 0/0
[ 0.093615] fiq debugger fiq mode enabled
[[ 0.094372] console [ttyFIQ0] enabled
0.094372] console [ttyFIQ0] enabled
[ 0.095075] bootconsole [uart0] disabled
[ 0.095075] bootconsole [uart0] disabled
[ 0.095728] Registered fiq debugger ttyFIQ0
[ 0.111080] iommu: Adding device ffb00000.vop to group 0
[ 0.111219] iommu: Adding device ffb80000.vpu_service to group 1
[ 0.111745] rk_iommu ffb00f00.iommu: can't get sclk
[ 0.112140] rk_iommu ffb80800.iommu: can't get sclk
[ 0.112727] SCSI subsystem initialized
[ 0.113029] usbcore: registered new interface driver usbfs
[ 0.113097] usbcore: registered new interface driver hub
[ 0.113200] usbcore: registered new device driver usb
[ 0.114237] i2c-gpio i2c@0: using pins 9 (SDA) and 8 (SCL)
[ 0.114342] media: Linux media interface: v0.10
[ 0.114413] Linux video capture interface: v2.00
[ 0.114536] pps_core: LinuxPPS API ver. 1 registered
[ 0.114560] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giom>
[ 0.114596] PTP clock support registered
[ 0.117854] Advanced Linux Sound Architecture Driver Initialized.
[ 0.118507] Bluetooth: Core ver 2.21
[ 0.118565] NET: Registered protocol family 31
[ 0.118610] Bluetooth: HCI device and connection manager initialized
[ 0.118649] Bluetooth: HCI socket layer initialized
[ 0.118665] Bluetooth: L2CAP socket layer initialized
[ 0.118708] Bluetooth: SCO socket layer initialized
[ 0.120128] rockchip-cpuinfo cpuinfo: Serial : 26fdb7a8b0baf54b
[ 0.120710] clocksource: Switched to clocksource arch_sys_counter
[ 0.134101] NET: Registered protocol family 2
[ 0.134745] TCP established hash table entries: 32768 (order: 6, 262144 byte)
[ 0.135190] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[ 0.135915] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.136018] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.136167] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.136508] NET: Registered protocol family 1
[ 0.136982] Unpacking initramfs...
[ 1.320966] Freeing initrd memory: 15716K
[ 1.321463] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counte
[ 1.334337] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 1.334636] ntfs: driver 2.1.32 [Flags: R/O].
[ 1.334997] SGI XFS with security attributes, no debug enabled
[ 1.340427] io scheduler noop registered (default)
[ 1.342617] phy phy-fe010000.syscon:usb2-phy@100.2: Failed to get VBUS supplr
[ 1.345931] rk-vcodec ffb80000.vpu_service: no regulator for vcodec
[ 1.347145] rk_vcodec: vcodec_read_property:3323: can't find vpu grf property
[ 1.347260] rk-vcodec ffb80000.vpu_service: probe device
[ 1.347605] rk-vcodec ffb80000.vpu_service: drm allocator with mmu enabled
[ 1.348550] rk-vcodec ffb80000.vpu_service: could not find power_model node
[ 1.348582] rk-vcodec ffb80000.vpu_service: init success
[ 1.352504] dma-pl330 ff4e0000.dmac: Loaded driver for PL330 DMAC-241330
[ 1.352550] dma-pl330 ff4e0000.dmac: DBUFF-128x8bytes Num_Chans-8 Nu6
[ 1.352967] rockchip-pvtm fe000000.syscon:npu-pvtm: failed to get rst 0 npu
[ 1.353130] rockchip-pvtm fe020000.syscon:pmu-pvtm: failed to get rst 0 pmu
[ 1.353291] rockchip-pvtm fe050000.syscon:pvtm: failed to get rst 0 core
[ 1.354035] rockchip-system-monitor rockchip-system-monitor: system monitor e
[ 1.356516] fan53555-regulator 6-001c: FAN53555 Option[12] Rev[15] Detected!
[ 1.356656] fan53555-reg: supplied by vcc5v0_sys
[ 1.357683] vdd_npu: Bringing 1150000uV into 950000-950000uV
[ 1.367916] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled
[ 1.369035] [drm] Initialized drm 1.1.0 20060810
[ 1.369764] ffb30000.dsi supply power not found, using dummy regulator
[ 1.372317] [drm] Rockchip DRM driver version: v1.0.1
[ 1.372585] rockchip-drm display-subsystem: devfreq is not set
[ 1.373069] rockchip-vop ffb00000.vop: missing rockchip,grf property
[ 1.373269] rockchip-drm display-subsystem: bound ffb00000.vop (ops 0xffffff)
[ 1.373309] rockchip-drm display-subsystem: failed to bind ffb30000.dsi (ops7
[ 1.373618] rockchip-drm display-subsystem: master bind failed: -517
[ 1.375385] ffb30000.dsi.0 supply power not found, using dummy regulator
[ 1.375928] Unable to detect cache hierarchy for CPU 0
[ 1.391327] loop: module loaded
[ 1.391622] SCSI Media Changer driver v0.25
[ 1.394285] Rockchip WiFi SYS interface (V1.00) ...
[ 1.394431] usbcore: registered new interface driver rtl8150
[ 1.394503] usbcore: registered new interface driver r8152
[ 1.394579] usbcore: registered new interface driver asix
[ 1.394658] usbcore: registered new interface driver ax88179_178a
[ 1.394753] usbcore: registered new interface driver cdc_ether
[ 1.394829] usbcore: registered new interface driver rndis_host
[ 1.394932] usbcore: registered new interface driver cdc_ncm
[ 1.394997] usbcore: registered new interface driver cdc_mbim
[ 1.401293] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.401338] ehci-pci: EHCI PCI platform driver
[ 1.401421] ehci-platform: EHCI generic platform driver
[ 1.403975] ehci-platform ffd80000.usb: EHCI Host Controller
[ 1.404040] ehci-platform ffd80000.usb: new USB bus registered, assigned bus1
[ 1.404300] ehci-platform ffd80000.usb: irq 22, io mem 0xffd80000
[ 1.409755] ehci-platform ffd80000.usb: USB 2.0 started, EHCI 1.00
[ 1.409981] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.410007] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber1
[ 1.410022] usb usb1: Product: EHCI Host Controller
[ 1.410048] usb usb1: Manufacturer: Linux 4.4.194 ehci_hcd
[ 1.410061] usb usb1: SerialNumber: ffd80000.usb
[ 1.410822] hub 1-0:1.0: USB hub found
[ 1.410894] hub 1-0:1.0: 1 port detected
[ 1.411453] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.411502] ohci-platform: OHCI generic platform driver
[ 1.411988] ohci-platform ffd90000.usb: Generic Platform OHCI controller
[ 1.412046] ohci-platform ffd90000.usb: new USB bus registered, assigned bus2
[ 1.412258] ohci-platform ffd90000.usb: irq 23, io mem 0xffd90000
[ 1.466945] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.466978] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber1
[ 1.466993] usb usb2: Product: Generic Platform OHCI controller
[ 1.467007] usb usb2: Manufacturer: Linux 4.4.194 ohci_hcd
[ 1.467029] usb usb2: SerialNumber: ffd90000.usb
[ 1.467844] hub 2-0:1.0: USB hub found
[ 1.467915] hub 2-0:1.0: 1 port detected
[ 1.469057] usbcore: registered new interface driver cdc_wdm
[ 1.469204] usbcore: registered new interface driver usb-storage
[ 1.469340] usbcore: registered new interface driver usbserial
[ 1.469391] usbcore: registered new interface driver usbserial_generic
[ 1.469443] usbserial: USB Serial support registered for generic
[ 1.469512] usbcore: registered new interface driver cp210x
[ 1.469555] usbserial: USB Serial support registered for cp210x
[ 1.469635] usbcore: registered new interface driver ftdi_sio
[ 1.469686] usbserial: USB Serial support registered for FTDI USB Serial Deve
[ 1.469875] usbcore: registered new interface driver keyspan
[ 1.469938] usbserial: USB Serial support registered for Keyspan - (without )
[ 1.469981] usbserial: USB Serial support registered for Keyspan 1 port adapr
[ 1.470025] usbserial: USB Serial support registered for Keyspan 2 port adapr
[ 1.470083] usbserial: USB Serial support registered for Keyspan 4 port adapr
|
|