Toybrick

RV1126D 烧录编译的 boot_linux.img 烧录后不能启动问题

HQF

注册会员

积分
71
楼主
发表于 2021-7-21 16:31:49    查看: 6662|回复: 2 | [复制链接]    打印 | 只看该作者
本帖最后由 HQF 于 2021-7-21 16:31 编辑

我通过Wiki下载的Kernel代码使用如下指令编译后得出的 boot_linux.img烧录之后kernel没有正常启动。
内核git记录::~/workdir/kernel$ git log
commit fb62bab4794b493124ec2d83f73d1b38381e428e (HEAD, origin/develop-4.19)
Author: chensq <chensq@rock-chips.com>
Date:   Mon Jun 21 17:47:17 2021 +0800

    arm64: dts: rockchip: Adjust the order(dts-v1)

    Signed-off-by: chensq <chensq@rock-chips.com>

编译方式:
./make-linux.sh TB-RV1126D

烧录启动后串口日志如下:
android_image_load_by_partname: Can't find part: boot
Android image load failed
Android boot failed, error -1.
MMC error: The cmd index is 1, ret is -110
Card did not respond to voltage select!
mmc_init: -95, time 10
switch to partitions #0, OK
mmc0(part 0) is current device
Scanning mmc 0:3...
Found /extlinux/extlinux.conf
Get board-id node failed
Retrieving file: /extlinux/extlinux.conf.TRs112
** File not found /extlinux/extlinux.conf.TRs112 **
Error reading config file
SCRIPT FAILED: continuing...
MMC error: The cmd index is 1, ret is -110
Card did not respond to voltage select!
mmc_init: -95, time 9
** Bad device mmc 1 **
MMC error: The cmd index is 1, ret is -110
Card did not respond to voltage select!
mmc_init: -95, time 9
** Bad device mmc 1 **
Scanning mmc 0:3...
Found /extlinux/extlinux.conf
Get board-id node failed
Retrieving file: /extlinux/extlinux.conf.TRs112
** File not found /extlinux/extlinux.conf.TRs112 **
Error reading config file
SCRIPT FAILED: continuing...
starting USB...
Bus dwc3@ffd00000: Register 1000140 NbrPorts 1
Starting the controller
USB XHCI 1.10
scanning bus dwc3@ffd00000 for devices... 1 USB Device(s) found
       scanning usb for storage devices... 0 Storage Device(s) found

Device 0: unknown device
EQOS_DMA_MODE_SWR stuckFAILED: 0rv1126_set_rgmii_speed can't get clk_mac_speed clock (ret=-61):
missing environment variable: pxeuuid
Retrieving file: /extlinux/pxelinux.cfg/01-10-dc-b6-90-53-6c
EQOS_DMA_MODE_SWR stuckFAILED: 0rv1126_set_rgmii_speed can't get clk_mac_speed clock (ret=-61):
Retrieving file: /extlinux/pxelinux.cfg/00000000
EQOS_DMA_MODE_SWR stuckFAILED: 0rv1126_set_rgmii_speed can't get clk_mac_speed clock (ret=-61):
Retrieving file: /extlinux/pxelinux.cfg/0000000
EQOS_DMA_MODE_SWR stuckFAILED: 0rv1126_set_rgmii_speed can't get clk_mac_speed clock (ret=-61):
Retrieving file: /extlinux/pxelinux.cfg/000000
EQOS_DMA_MODE_SWR stuckFAILED: 0rv1126_set_rgmii_speed can't get clk_mac_speed clock (ret=-61):
Retrieving file: /extlinux/pxelinux.cfg/00000
EQOS_DMA_MODE_SWR stuckFAILED: 0rv1126_set_rgmii_speed can't get clk_mac_speed clock (ret=-61):
Retrieving file: /extlinux/pxelinux.cfg/0000
EQOS_DMA_MODE_SWR stuckFAILED: 0rv1126_set_rgmii_speed can't get clk_mac_speed clock (ret=-61):
Retrieving file: /extlinux/pxelinux.cfg/000
EQOS_DMA_MODE_SWR stuckFAILED: 0rv1126_set_rgmii_speed can't get clk_mac_speed clock (ret=-61):
Retrieving file: /extlinux/pxelinux.cfg/00
EQOS_DMA_MODE_SWR stuckFAILED: 0rv1126_set_rgmii_speed can't get clk_mac_speed clock (ret=-61):
Retrieving file: /extlinux/pxelinux.cfg/0
EQOS_DMA_MODE_SWR stuckFAILED: 0rv1126_set_rgmii_speed can't get clk_mac_speed clock (ret=-61):
Retrieving file: /extlinux/pxelinux.cfg/default-arm-rockchip
EQOS_DMA_MODE_SWR stuckFAILED: 0rv1126_set_rgmii_speed can't get clk_mac_speed clock (ret=-61):
Retrieving file: /extlinux/pxelinux.cfg/default-arm
EQOS_DMA_MODE_SWR stuckFAILED: 0rv1126_set_rgmii_speed can't get clk_mac_speed clock (ret=-61):
Retrieving file: /extlinux/pxelinux.cfg/default
EQOS_DMA_MODE_SWR stuckFAILED: 0rv1126_set_rgmii_speed can't get clk_mac_speed clock (ret=-61):
Config file not found
EQOS_DMA_MODE_SWR stuckFAILED: 0rv1126_set_rgmii_speed can't get clk_mac_speed clock (ret=-61):


有没有人能告诉我哪里出错啊!!!!




回复

使用道具 举报

HQF

注册会员

积分
71
沙发
 楼主| 发表于 2021-7-21 17:47:11 | 只看该作者
已经好了,但是网络打不开了
root@debian10:/# ifconfig eth0 up
[   87.356357] [dhd] CFG80211-ERROR) wl_cfg80211_netdev_notifier_call : wdev null. Do nothing
[   87.357957] Generic PHY stmmac-0:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=stmmac-0:00, irq=POLL)
[   87.369680] dwmac4: Master AXI performs any burst length
[   87.369750] rk_gmac-dwmac ffc40000.ethernet eth0: No Safety Features support found
[   87.369779] rk_gmac-dwmac ffc40000.ethernet eth0: IEEE root@debian10:/# 1588-2008 Advanced Timestamp supported
[   87.370420] rk_gmac-dwmac ffc40000.ethernet eth0: registered PTP clock
[   87.370953] [dhd] CFG80211-ERROR) wl_cfg80211_netdev_notifier_call : wdev null. Do nothing
[   87.371127] [dhd] CFG80211-ERROR) wl_cfg80211_netdev_notifier_call : wdev null. Do nothing
[   88.373328] rk_gmac-dwmac ffc40000.ethernet eth0: Link is Up - 100Mbps/Full - flow control rx/tx
[   88.373416] [dhd] CFG80211-ERROR) wl_cfg80211_netdev_notifier_call : wdev null. Do nothing
回复

使用道具 举报

板凳
发表于 2021-7-22 11:46:06 | 只看该作者
sudo dhclient eth0试下
回复

使用道具 举报

您需要登录后才可以回帖 登录 | 立即注册

本版积分规则

产品中心 购买渠道 开源社区 Wiki教程 资料下载 关于Toybrick


快速回复 返回顶部 返回列表