Toybrick

TYPE C0 设置为USB3.0

梅名智

注册会员

积分
75
发表于 2020-12-8 16:29:00    查看: 5207|回复: 3 | [复制链接]    打印 | 显示全部楼层
参考了说明文档,将typeC0改成USB3.0 Host;发现无法工作;检测不到设备的插入。
设备电源正常?
使用的是toybrick-prox核心板通过外扩底板实现。
回复

使用道具 举报

梅名智

注册会员

积分
75
 楼主| 发表于 2020-12-8 18:25:14 | 显示全部楼层
[17:47:44][    1.295338] xhci-hcd xhci-hcd.10.auto: xHCI Host Controller
[17:47:44][    1.295574] xhci-hcd xhci-hcd.10.auto: new USB bus registered, assigned bus number 1
[17:47:44][    1.295966] xhci-hcd xhci-hcd.10.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x06030010
[17:47:44][    1.296043] xhci-hcd xhci-hcd.10.auto: irq 230, io mem 0xfe800000
[17:47:44][    1.296358] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[17:47:44][    1.296379] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[17:47:44][    1.296392] usb usb1: Product: xHCI Host Controller
[17:47:44][    1.296404] usb usb1: Manufacturer: Linux 4.4.189 xhci-hcd
[17:47:44][    1.296415] usb usb1: SerialNumber: xhci-hcd.10.auto

从日志来看,应该是HOST对了,但是无法识别到设备插入。
此口当升级是可以的,有boot模式能检测到loader设备。证明USB2.0的硬件是OK的。
回复

使用道具 举报

梅名智

注册会员

积分
75
 楼主| 发表于 2020-12-8 18:27:49 | 显示全部楼层
[17:47:44][    1.288882] mali ff9a0000.gpu: Probed as mali0
[17:47:44][    1.295338] xhci-hcd xhci-hcd.10.auto: xHCI Host Controller
[17:47:44][    1.295574] xhci-hcd xhci-hcd.10.auto: new USB bus registered, assigned bus number 1
[17:47:44][    1.295966] xhci-hcd xhci-hcd.10.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x06030010
[17:47:44][    1.296043] xhci-hcd xhci-hcd.10.auto: irq 230, io mem 0xfe800000
[17:47:44][    1.296358] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[17:47:44][    1.296379] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[17:47:44][    1.296392] usb usb1: Product: xHCI Host Controller
[17:47:44][    1.296404] usb usb1: Manufacturer: Linux 4.4.189 xhci-hcd
[17:47:44][    1.296415] usb usb1: SerialNumber: xhci-hcd.10.auto
[17:47:44][    1.297013] hub 1-0:1.0: USB hub found
[17:47:44][    1.297058] hub 1-0:1.0: 1 port detected
[17:47:44][    1.297401] xhci-hcd xhci-hcd.10.auto: xHCI Host Controller
[17:47:44][    1.297582] xhci-hcd xhci-hcd.10.auto: new USB bus registered, assigned bus number 2
[17:47:44][    1.297668] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[17:47:44][    1.297792] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[17:47:44][    1.297812] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[17:47:44][    1.297824] usb usb2: Product: xHCI Host Controller
[17:47:44][    1.297836] usb usb2: Manufacturer: Linux 4.4.189 xhci-hcd
[17:47:44][    1.297848] usb usb2: SerialNumber: xhci-hcd.10.auto
[17:47:44][    1.298359] hub 2-0:1.0: USB hub found
[17:47:44][    1.298406] hub 2-0:1.0: 1 port detected
[17:47:44][    1.300875] xhci-hcd xhci-hcd.10.auto: remove, state 1

马上remove掉了
回复

使用道具 举报

cjlongfei

金牌会员

积分
1041
发表于 2020-12-22 13:57:27 | 显示全部楼层
也遇到了同样的问题,有没有解决方案了?
回复

使用道具 举报

您需要登录后才可以回帖 登录 | 立即注册

本版积分规则

产品中心 购买渠道 开源社区 Wiki教程 资料下载 关于Toybrick


快速回复 返回顶部 返回列表