Toybrick

RK3588核心板无法正常启动

gggg

注册会员

积分
82
楼主
发表于 2023-4-4 14:24:55    查看: 3339|回复: 4 | [复制链接]    打印 | 只看该作者
本帖最后由 gggg 于 2023-4-4 14:27 编辑

我们基于RK3588核心板自己开发的底板,现在上电无法正常开机,固件是出厂的debian。以下是debug打印,麻烦指导下排查方向。

[14:15:11.225]收←◆屘涛颸0
[14:15:11.305]收←◆DDR Version V1.08 20220617

[14:15:11.471]收←◆LPDDR4X, 2112MHz
channel[0] BW=16 Col=10 Bk=8 CS0 Row=16 CS1 Row=16 CS=2 Die BW=16 Size=2048MB
channel[1] BW=16 Col=10 Bk=8 CS0 Row=16 CS1 Row=16 CS=2 Die BW=16 Size=2048MB
channel[2] BW=16 Col=10 Bk=8 CS0 Row=16 CS1 Row=16 CS=2 Die BW=16 Size=2048MB
channel[3] BW=16 Col=10 Bk=8 CS0 Row=16 CS1 Row=16 CS=2 Die BW=16 Size=2048MB
Manufacturer ID:0x1 Samsung
CH0 RX Vref:31.7%, TX Vref:21.8%,21.8%
CH1 RX Vref:33.7%, TX Vref:19.8%,20.8%
CH2 RX Vref:32.7%, TX Vref:19.8%,19.8%
CH3 RX Vref:30.7%, TX Vref:21.8%,21.8%
change to F1: 528MHz
change to F2: 1068MHz

[14:15:11.536]收←◆change to F3: 1560MHz

[14:15:11.568]收←◆change to F0: 2112MHz

[14:15:11.599]收←◆out
U-Boot SPL board init
[14:15:11.655]收←◆
U-Boot SPL 2017.09-gc060f28d70-220414 #zyf (Apr 18 2022 - 18:13:34)
Failed to set cpub01
Failed to set cpub23
unknown raw ID phN
unrecognized JEDEC id bytes: 00, 00, 00
Trying to boot from MMC2
MMC: no card present
mmc_init: -123, time 0
spl: mmc init failed with error: -123
Trying to boot from MMC1

[14:15:11.776]收←◆Trying fit image at 0x2000 sector
## Verified-boot: 0
## Checking atf-1 0x00040000 ... sha256(581130cddd...) + OK
## Checking uboot 0x00200000 ... sha256(bdeb76df2b...) + OK
## Checking fdt 0x0032b178 ... sha256(c07f4a4d71...) + OK
## Checking atf-2 0x000f0000 ... sha256(6a00298af8...) + OK
## Checking atf-3 0xff100000 ... sha256(71c3a5841b...) + OK
## Checking atf-4 0xff001000 ... sha256(2301cf73be...) + OK
## Checking optee 0x08400000 ... sha256(603cfbd25d...) + OK
Jumping to U-Boot(0x00200000) via ARM Trusted Firmware(0x00040000)
Total: 117.276 ms

INFO:    Preloader serial: 2
NOTICE:  BL31: v2.3():v2.3-364-g55ca4fb1c:derrick.huang
NOTICE:  BL31: Built : 12:00:02, May 13 2022
INFO:    timer_hp_init no valid 32k timer source, use normal mode
INFO:    GICv3 without legacy support detected.
INFO:    ARM GICv3 driver initialized in EL3
INFO:    system boots from cpu-hwid-0
INFO:    idle_st=0x21fff, pd_st=0x11fff9
INFO:    dfs DDR fsp_params[0].freq_mhz= 2112MHz
INFO:    dfs DDR fsp_params[1].freq_mhz= 528MHz
INFO:    dfs DDR fsp_params[2].freq_mhz= 1068MHz
INFO:    dfs DDR fsp_params[3].freq_mhz= 1560MHz
INFO:    BL31: Initialising Exception Handling Framework
INFO:    BL31: Initializing runtime services
INFO:    BL31: Initializing BL32
INFO:    hdmirx_handler: dma not on, ret

[14:15:11.828]收←◆I/TC:
I/TC: OP-TEE version: 3.13.0-639-g8e053a881-dev #hisping.lin (gcc version 10.2.1 20201103 (GNU Toolchain for the A-profile Architecture 10.2-2020.11 (arm-10.16))) #2 Mon Mar 14 09:09:01 CST 2022 aarch64
I/TC: Primary CPU initializing

[14:15:11.871]收←◆I/TC: Primary CPU switching to normal world boot
INFO:    BL31: Preparing for EL3 exit to normal world
INFO:    Entry point address = 0x200000
INFO:    SPSR = 0x3c9

[14:15:11.920]收←◆

U-Boot 2017.09-g971ac17b98 #toybrick (Jun 30 2022 - 05:43:02 -0400)

Model: Rockchip RK3588 Evaluation Board
PreSerial: 2, raw, 0xfeb50000
DRAM:  7.7 GiB
Sysmem: init
Relocation Offset: edb4c000
Relocation fdt: eb9f9e48 - eb9fecd0

[14:15:11.957]收←◆CR: M/C/I
Using default environment

mmc@fe2c0000: 1, mmc@fe2e0000: 0

[14:15:12.021]收←◆Bootdev(atags): mmc 0
MMC0: HS200, 200Mhz
PartType: EFI
DM: v2
boot mode: None
FIT: No boot partition
165988 bytes read in 4 ms (39.6 MiB/s)
DTB(Distro): /extlinux/toybrick.dtb

[14:15:12.068]收←◆Pre-reloc: vcc_mipicsi1
I2c0 speed: 100000Hz
vsel-gpios- not found!
en-gpios- not found!
vdd_cpu_big0_s0 800000 uV
vsel-gpios- not found!
en-gpios- not found!
vdd_cpu_big1_s0 800000 uV
I2c2 speed: 400000Hz
vsel-gpios- not found!
en-gpios- not found!
vdd_npu_s0 800000 uV
spi2: RK806: 2
ON=0x00, OFF=0x00
vdd_gpu_s0 750000 uV
vdd_cpu_lit_s0 750000 uV
vdd_log_s0 750000 uV
vdd_vdenc_s0 init 750000 uV
vdd_ddr_s0 850000 uV
Model: Rockchip RK3588 TOYBRICK X10 Board
Load SnMacAc from vendor: sn TC050A46A00156, mac 10dcb690dc08
optee api revision: 2.0
TEEC: Waring: Could not find security partition
I/TC: RPMB: Using generated key

[14:15:12.197]收←◆Load SnMacAc from rpmb: sn TC050A46A00156, mac 10dcb690dc08
Toybrick check SnMacAc OK, sn TC050A46A00156
CLK: (uboot. arm: enter 1008000 KHz, init 1008000 KHz, kernel 0N/A)
  b0pll 1200000 KHz
  b1pll 1200000 KHz
  lpll 1200000 KHz
  v0pll 24000 KHz
  aupll 786431 KHz
  cpll 1500000 KHz
  gpll 1188000 KHz
  npll 850000 KHz
  ppll 1100000 KHz
  aclk_center_root 702000 KHz
  pclk_center_root 100000 KHz
  hclk_center_root 396000 KHz
  aclk_center_low_root 500000 KHz
  aclk_top_root 750000 KHz
  pclk_top_root 100000 KHz
  aclk_low_top_root 396000 KHz
Net:   eth0: ethernet@fe1b0000
Hit key to stop autoboot('CTRL+C'):  0
ANDROID: reboot reason: "(none)"
Not AVB images, AVB skip
android_image_load_by_partname: Can't find part: boot
Android image load failed
Android boot failed, error -1.
## Booting FIT Image FIT: No boot partition
FIT: No fit blob
FIT: No FIT image
Unknown command 'bootrkp' - try 'help'
MMC: no card present
mmc_init: -123, time 0
switch to partitions #0, OK
mmc0(part 0) is current device
Scanning mmc 0:3...
Found /extlinux/extlinux.conf
Retrieving file: /extlinux/extlinux.conf
205 bytes read in 4 ms (49.8 KiB/s)
1:        rockchip-kernel-5.10
Retrieving file: /extlinux/Image

[14:15:12.415]收←◆31832576 bytes read in 179 ms (169.6 MiB/s)
append: earlycon=uart8250,mmio32,0xfeb50000 root=PARTUUID=614e0000-0000-4b53-8000-1d28000054a9 rw rootwait rootfstype=ext4
Retrieving file: /extlinux/toybrick.dtb
165988 bytes read in 5 ms (31.7 MiB/s)
Fdt Ramdisk skip relocation
## Flattened Device Tree blob at 0x0a100000
   Booting using the fdt blob at 0x0a100000
  'reserved-memory' cma: addr=10000000 size=10000000
   Using Device Tree in place at 000000000a100000, end 000000000a12b863
Adding bank: 0x00200000 - 0x08400000 (size: 0x08200000)
Adding bank: 0x09400000 - 0xf0000000 (size: 0xe6c00000)
Adding bank: 0x100000000 - 0x200000000 (size: 0x100000000)
Total: 513.114 ms

Starting kernel ...

[    0.627197] Booting Linux on physical CPU 0x0000000000 [0x412fd050]
[    0.627220] Linux version 5.10.66 (toybrick@toybrick) (Android (7284624, based on r416183b) clang version 12.0.5 (https://android.googlesource.com/toolchain/llvm-project c935d99d7cf2016289302412d708641d52d2f7ee), LLD 12.0.5 (/buildbot/src/android/llvm-toolchain/out/llvm-project/lld c935d99d7cf2016289302412d708641d52d2f7ee)) #2 SMP Thu Jun 30 05:42:35 EDT 2022
[    0.637427] Machine model: Rockchip RK3588 TOYBRICK X10 Board
[    0.637454] earlycon: uart8250 at MMIO32 0x00000000feb50000 (options '')
[    0.642081] printk: bootconsole [uart8250] enabled
[    0.645007] efi: UEFI not found.
[    0.650942] OF: fdt: Reserved memory: failed to reserve memory for node 'drm-logo@00000000': base 0x0000000000000000, size 0 MiB
[    0.652017] OF: fdt: Reserved memory: failed to reserve memory for node 'drm-cubic-lut@00000000': base 0x0000000000000000, size 0 MiB
[    0.653166] Reserved memory: created CMA memory pool at 0x0000000010000000, size 256 MiB
[    0.653908] OF: reserved mem: initialized node cma, compatible id shared-dma-pool

[14:15:12.541]收←◆[    0.775101] Zone ranges:
[    0.775342]   DMA      [mem 0x0000000000200000-0x00000000ffffffff]
[    0.775914]   DMA32    empty
[    0.776183]   Normal   [mem 0x0000000100000000-0x00000001ffffffff]
[    0.776754] Movable zone start for each node
[    0.777148] Early memory node ranges
[    0.777480]   node   0: [mem 0x0000000000200000-0x00000000083fffff]
[    0.778057]   node   0: [mem 0x0000000009400000-0x00000000efffffff]
[    0.778636]   node   0: [mem 0x0000000100000000-0x00000001ffffffff]
[    0.779214] Initmem setup node 0 [mem 0x0000000000200000-0x00000001ffffffff]

[14:15:12.608]收←◆[    0.827574] psci: probing for conduit method from DT.
[    0.828047] psci: PSCIv1.1 detected in firmware.
[    0.828473] psci: Using standard PSCI v0.2 function IDs
[    0.828958] psci: Trusted OS migration not required
[    0.829409] psci: SMC Calling Convention v1.2
[    0.830169] percpu: Embedded 31 pages/cpu s88424 r8192 d30360 u126976
[    0.830948] Detected VIPT I-cache on CPU0
[    0.831348] CPU features: detected: GIC system register CPU interface
[    0.831942] CPU features: detected: Virtualization Host Extensions
[    0.832516] CPU features: detected: ARM errata 1165522, 1319367, or 1530923
[    0.833163] alternatives: patching kernel code
[    0.835546] Built 1 zonelists, mobility grouping on.  Total pages: 1995336
[    0.836183] Kernel command line: earlycon=uart8250,mmio32,0xfeb50000 root=PARTUUID=614e0000-0000 rw rootwait rootfstype=ext4 console=ttyFIQ0 irqchip.gicv3_pseudo_nmi=0
[    0.838525] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[    0.839634] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[    0.840357] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.846895] software IO TLB: mapped [mem 0x00000000ec000000-0x00000000f0000000] (64MB)

[14:15:12.671]收←◆[    0.908665] Memory: 7591076K/8108032K available (19264K kernel code, 3502K rwdata, 6484K rodata, 1728K init, 613K bss, 254812K reserved, 262144K cma-reserved)
[    0.910091] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[    0.910720] ftrace: allocating 64184 entries in 251 pages

[14:15:12.790]收←◆[    1.008009] ftrace: allocated 251 pages with 7 groups
[    1.008727] rcu: Hierarchical RCU implementation.
[    1.009163] rcu:         RCU event tracing is enabled.
[    1.009580]         Rude variant of Tasks RCU enabled.
[    1.009998]         Tracing variant of Tasks RCU enabled.
[    1.010441] rcu: RCU calculated value of scheduler-enlistment delay is 30 jiffies.
[    1.016228] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[    1.018867] GICv3: GIC: Using split EOI/Deactivate mode
[    1.019353] GICv3: 480 SPIs implemented
[    1.019706] GICv3: 0 Extended SPIs implemented
[    1.020140] GICv3: Distributor has no Range Selector support
[    1.020666] GICv3: 16 PPIs implemented
[    1.021053] GICv3: CPU0: found redistributor 0 region 0:0x00000000fe680000
[    1.021789] ITS [mem 0xfe640000-0xfe65ffff]
[    1.022219] ITS@0x00000000fe640000: allocated 8192 Devices @100200000 (indirect, esz 8, psz 64K, shr 0)
[    1.023099] ITS@0x00000000fe640000: allocated 32768 Interrupt Collections @100210000 (flat, esz 2, psz 64K, shr 0)
[    1.024052] ITS: using cache flushing for cmd queue
[    1.024531] ITS [mem 0xfe660000-0xfe67ffff]
[    1.024954] ITS@0x00000000fe660000: allocated 8192 Devices @100230000 (indirect, esz 8, psz 64K, shr 0)
[    1.025835] ITS@0x00000000fe660000: allocated 32768 Interrupt Collections @100240000 (flat, esz 2, psz 64K, shr 0)
[    1.026789] ITS: using cache flushing for cmd queue
[    1.027379] GICv3: using LPI property table @0x0000000100250000
[    1.028031] GIC: using cache flushing for LPI property table
[    1.028557] GICv3: CPU0: using allocated LPI pending table @0x0000000100260000

[14:15:12.936]收←◆[    1.029357] random: get_random_bytes called from start_kernel+0x250/0x4f0 with crng_init=0
[    1.151486] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
[    1.152800] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[    1.153788] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[    1.155500] Console: colour dummy device 80x25
[    1.155934] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=80000)
[    1.156876] pid_max: default: 32768 minimum: 301
[    1.157427] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    1.158134] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    1.160349] rcu: Hierarchical SRCU implementation.
[    1.161578] Platform MSI: msi-controller@fe640000 domain created
[    1.162141] Platform MSI: msi-controller@fe660000 domain created
[    1.162984] PCI/MSI: /interrupt-controller@fe600000/msi-controller@fe640000 domain created
[    1.163753] PCI/MSI: /interrupt-controller@fe600000/msi-controller@fe660000 domain created
[    1.164625] EFI services will not be available.
[    1.165305] smp: Bringing up secondary CPUs ...
I/TC: Secondary CPU 1 initializing
I/TC: Secondary CPU 1 switching to normal world boot
I/TC: Secondary CPU 2 initializing
I/TC: Secondary CPU 2 switching to normal world boot
I/TC: Secondary CPU 3 initializing
I/TC: Secondary CPU 3 switching to normal world boot
I/TC: Secondary CPU 4 initializing
I/TC: Secondary CPU 4 switching to normal world boot
I/TC: Secondary CPU 5 initializing
I/TC: Secondary CPU 5 switching to normal world boot
I/TC: Secondary CPU 6 initializing
I/TC: Secondary CPU 6 switching to normal world boot
I/TC: Secondary CPU 7 initializing
I/TC: Secondary CPU 7 switching to normal world boot
[    1.166863] Detected VIPT I-cache on CPU1
[    1.166887] GICv3: CPU1: found redistributor 100 region 0:0x00000000fe6a0000
[    1.166902] GICv3: CPU1: using allocated LPI pending table @0x0000000100270000
[    1.166940] CPU1: Booted secondary processor 0x0000000100 [0x412fd050]
[    1.168118] Detected VIPT I-cache on CPU2
[    1.168138] GICv3: CPU2: found redistributor 200 region 0:0x00000000fe6c0000
[    1.168153] GICv3: CPU2: using allocated LPI pending table @0x0000000100280000
[    1.168189] CPU2: Booted secondary processor 0x0000000200 [0x412fd050]
[    1.169340] Detected VIPT I-cache on CPU3
[    1.169357] GICv3: CPU3: found redistributor 300 region 0:0x00000000fe6e0000
[    1.169371] GICv3: CPU3: using allocated LPI pending table @0x0000000100290000
[    1.169405] CPU3: Booted secondary processor 0x0000000300 [0x412fd050]
[    1.170569] CPU features: detected: Spectre-v4
[    1.170572] Detected PIPT I-cache on CPU4
[    1.170582] GICv3: CPU4: found redistributor 400 region 0:0x00000000fe700000
[    1.170590] GICv3: CPU4: using allocated LPI pending table @0x00000001002a0000
[    1.170611] CPU4: Booted secondary processor 0x0000000400 [0x414fd0b0]
[    1.171725] Detected PIPT I-cache on CPU5
[    1.171736] GICv3: CPU5: found redistributor 500 region 0:0x00000000fe720000
[    1.171744] GICv3: CPU5: using allocated LPI pending table @0x00000001002b0000
[    1.171766] CPU5: Booted secondary processor 0x0000000500 [0x414fd0b0]
[    1.172885] Detected PIPT I-cache on CPU6
[    1.172895] GICv3: CPU6: found redistributor 600 region 0:0x00000000fe740000
[    1.172904] GICv3: CPU6: using allocated LPI pending table @0x00000001002c0000
[    1.172926] CPU6: Booted secondary processor 0x0000000600 [0x414fd0b0]
[    1.174026] Detected PIPT I-cache on CPU7
[    1.174037] GICv3: CPU7: found redistributor 700 region 0:0x00000000fe760000
[    1.174045] GICv3: CPU7: using allocated LPI pending table @0x00000001002d0000
[    1.174066] CPU7: Booted secondary processor 0x0000000700 [0x414fd0b0]
[    1.174119] smp: Bro
[14:15:12.987]收←◆ught up 1 node, 8 CPUs
[    1.190721] SMP: Total of 8 processors activated.
[    1.191158] CPU features: detected: Privileged Access Never
[    1.191668] CPU features: detected: User Access Override
[    1.192155] CPU features: detected: 32-bit EL0 Support
[    1.192626] CPU features: detected: Common not Private translations
[    1.193199] CPU features: detected: RAS Extension Support
[    1.193693] CPU features: detected: Data cache clean to the PoU not required for I/D coherence
[    1.194480] CPU features: detected: CRC32 instructions
[    1.194955] CPU features: detected: Speculative Store Bypassing Safe (SSBS)
[    1.195594] CPU features: detected: RCpc load-acquire (LDAPR)
[    1.196190] CPU: All CPU(s) started at EL2
[    1.197991] devtmpfs: initialized
[    1.206311] Registered cp15_barrier emulation handler
[    1.206775] Registered setend emulation handler
[    1.207245] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[    1.208138] futex hash table entries: 2048 (order: 5, 131072 bytes, linear)
[    1.210609] pinctrl core: initialized pinctrl subsystem
[    1.211298] DMI not present or invalid.
[    1.211745] NET: Registered protocol family 16
[    1.212825] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations
[    1.213546] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[    1.214709] thermal_sys: Registered thermal governor 'fair_share'
[    1.214710] thermal_sys: Registered thermal governor 'step_wise'
[    1.215270] thermal_sys: Registered thermal governor 'user_space'
[    1.215817] thermal_sys: Registered thermal governor 'power_allocator'
[    1.216481] thermal thermal_zone1: power_allocator: sustainable_power will be estimated
[    1.217819] thermal thermal_zone2: power_allocator: sustainable_power will be estimated
[    1.218569] thermal thermal_zone3: power_allocator: sustainable_power will be estimated
[    1.219324] thermal thermal_zone4: power_allocator: sustainable_power will be estimated
[    1.220071] thermal thermal_zone5: power_allocator: sustainable_power will be estimated
[    1.220816] thermal thermal_zone6: power_allocator: sustainable_power will be estimated
[    1.221555] cpuidle: using governor menu
[    1.221914] Registered FIQ tty driver
[    1.222361] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[    1.223068] ASID allocator initialised with 65536 entries
[    1.224953] printk: console [ramoops-1] enabled
[    1.225368] pstore: Registered ramoops as persistent store backend
[    1.225932] ramoops: using 0xf0000@0x110000, ecc: 0

[14:15:13.030]收←◆[    1.265460] rockchip-gpio fd8a0000.gpio: probed /pinctrl/gpio@fd8a0000
[    1.266246] rockchip-gpio fec20000.gpio: probed /pinctrl/gpio@fec20000
[    1.267011] rockchip-gpio fec30000.gpio: probed /pinctrl/gpio@fec30000
[    1.267775] rockchip-gpio fec40000.gpio: probed /pinctrl/gpio@fec40000
[    1.268577] rockchip-gpio fec50000.gpio: probed /pinctrl/gpio@fec50000
[    1.269195] rockchip-pinctrl pinctrl: probed pinctrl

[14:15:13.094]收←◆[    1.335137] raid6: neonx8   gen()  6596 MB/s

[14:15:13.142]收←◆[    1.391866] raid6: neonx8   xor()  5038 MB/s

[14:15:13.206]收←◆[    1.448598] raid6: neonx4   gen()  6193 MB/s

[14:15:13.253]收←◆[    1.505329] raid6: neonx4   xor()  5014 MB/s

[14:15:13.318]收←◆[    1.562064] raid6: neonx2   gen()  5829 MB/s

[14:15:13.366]收←◆[    1.618794] raid6: neonx2   xor()  4443 MB/s

[14:15:13.430]收←◆[    1.675527] raid6: neonx1   gen()  4527 MB/s

[14:15:13.478]收←◆[    1.732257] raid6: neonx1   xor()  3635 MB/s

[14:15:13.542]收←◆[    1.788993] raid6: int64x8  gen()  3182 MB/s

[14:15:13.605]收←◆[    1.845722] raid6: int64x8  xor()  1658 MB/s

[14:15:13.653]收←◆[    1.902458] raid6: int64x4  gen()  3148 MB/s

[14:15:13.718]收←◆[    1.959186] raid6: int64x4  xor()  1660 MB/s

[14:15:13.766]收←◆[    2.015920] raid6: int64x2  gen()  2554 MB/s

[14:15:13.830]收←◆[    2.072657] raid6: int64x2  xor()  1363 MB/s

[14:15:13.878]收←◆[    2.129381] raid6: int64x1  gen()  2152 MB/s

[14:15:13.982]收←◆[    2.186128] raid6: int64x1  xor()  1144 MB/s
[    2.186519] raid6: using algorithm neonx8 gen() 6596 MB/s
[    2.187013] raid6: .... xor() 5038 MB/s, rmw enabled
[    2.187466] raid6: using neon recovery algorithm
[    2.188344] fiq_debugger fiq_debugger.0: IRQ fiq not found
[    2.188849] fiq_debugger fiq_debugger.0: IRQ wakeup not found
[    2.189375] fiq_debugger_probe: could not install nmi irq handler
[ [    2.189968] printk: console [ttyFIQ0] enabled
   2.189968] printk: console [ttyFIQ0] enabled
[    2.190745] printk: bootconsole [uart8250] disabled
[    2.190745] printk: bootconsole [uart8250] disabled
[    2.191263] Registered fiq debugger ttyFIQ0
[    2.191550] vcc5v0_sys: supplied by vcc12v_dcin
[    2.191652] vcc5v0_usbdcin: supplied by vcc12v_dcin
[    2.191747] vcc5v0_usb: supplied by vcc5v0_usbdcin
[    2.191875] vcc_1v1_nldo_s3: supplied by vcc5v0_sys
[    2.192090] vbus5v0_typec: supplied by vcc5v0_usb
[    2.192194] vcc3v3_pcie30: supplied by vcc12v_dcin
[    2.192276] vcc5v0_host: supplied by vcc5v0_usb
[    2.192533] debugfs: Directory 'vcc_mipicsi1' with parent 'regulator' already present!
[    2.192541] debugfs: Directory 'vcc_mipicsi1' with parent 'vcc_mipicsi1' already present!
[    2.192742] iommu: Default domain type: Translated
[    2.192801] rk_iommu fdab9000.iommu: version = 2
[    2.193113] rk_iommu fdb50800.iommu: version = 2
[    2.193315] rk_iommu fdb60f00.iommu: version = 2
[    2.193463] rk_iommu fdb70f00.iommu: version = 2
[    2.193595] rk_iommu fdb90480.iommu: version = 2
[    2.193745] rk_iommu fdba0800.iommu: version = 2
[    2.193890] rk_iommu fdba4800.iommu: version = 2
[    2.194041] rk_iommu fdba8800.iommu: version = 2
[    2.194191] rk_iommu fdbac800.iommu: version = 2
[    2.194339] rk_iommu fdbb0800.iommu: version = 2
[    2.194495] rk_iommu fdbdf000.iommu: version = 2
[    2.194726] rk_iommu fdbef000.iommu: version = 2
[    2.194963] rk_iommu fdc38700.iommu: version = 2
[    2.195201] rk_iommu fdc48700.iommu: version = 2
[    2.195375] rk_iommu fdcb7f00.iommu: version = 2
[    2.195568] rk_iommu fdcc7f00.iommu: version = 2
[    2.195718] rk_iommu fdce0800.iommu: version = 2
[    2.195803] rk_iommu fdd97e00.iommu: version = 2
[    2.196058] SCSI subsystem initialized
[    2.196124] usbcore: registered new interface driver usbfs
[    2.196137] usbcore: registered new interface driver hub
[    2.196148] usbcore: registered new device driver usb
[    2.196177] mc: Linux media interface: v0.10
[    2.196186] videodev: Linux video capture interface: v2.00
[    2.196206] pps_core: LinuxPPS API ver. 1 registered
[    2.196210] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    2.196215] PTP clock support registered
[    2.196416] arm-scmi firmware:scmi: SCMI Notifications - Core Enabled.
[    2.196445] arm-scmi firmware:scmi: SCMI Protocol v2.0 'rockchip:' Firmware version 0x0
[    2.197258] Advanced Linux Sound Architecture Driver Initialized.
[    2.197418] Bluetooth: Core ver 2.22
[    2.197429] NET: Registered protocol family 31
[    2.197433] Bluetooth: HCI device and connection manager initialized
[    2.197437] Bluetooth: HCI socket layer initialized
[    2.197442] Bluetooth: L2CAP socket layer initialized
[    2.197448] Bluetooth: SCO socket layer initialized
[    2.198707] rockchip-cpuinfo cpuinfo: SoC                : 35880000
[    2.198711] rockchip-cpuinfo cpuinfo: Serial                : c71fd64e7c1c247a
[    2.198968] clocksource: Switched to clocksource arch_sys_counter

[14:15:14.204]收←◆[    2.430171] NET: Registered protocol family 2
[    2.430277] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[    2.432018] tcp_listen_portaddr_hash hash table entries: 4096 (order: 5, 163840 bytes, linear)
[    2.432108] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear)
[    2.432432] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear)
[    2.433237] TCP: Hash tables configured (established 65536 bind 65536)
[    2.433281] UDP hash table entries: 4096 (order: 6, 393216 bytes, linear)
[    2.433431] UDP-Lite hash table entries: 4096 (order: 6, 393216 bytes, linear)
[    2.433635] NET: Registered protocol family 1
[    2.433841] RPC: Registered named UNIX socket transport module.
[    2.433847] RPC: Registered udp transport module.
[    2.433849] RPC: Registered tcp transport module.
[    2.433852] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    2.434215] PCI: CLS 0 bytes, default 64
[    2.435021] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available
[    2.436762] Initialise system trusted keyrings
[    2.436806] workingset: timestamp_bits=46 max_order=21 bucket_order=0
[    2.438547] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    2.438754] NFS: Registering the id_resolver key type
[    2.438763] Key type id_resolver registered
[    2.438766] Key type id_legacy registered
[    2.438778] ntfs: driver 2.1.32 [Flags: R/O].
[    2.438826] jffs2: version 2.2. (NAND) 漏 2001-2006 Red Hat, Inc.
[    2.438905] fuse: init (API version 7.32)
[    2.439029] SGI XFS with security attributes, no debug enabled

[14:15:14.240]收←◆[    2.458867] NET: Registered protocol family 38
[    2.458875] xor: measuring software checksum speed
[    2.460109]    8regs           :  8042 MB/sec
[    2.461099]    32regs          :  9986 MB/sec
[    2.461921]    arm64_neon      : 12067 MB/sec
[    2.461925] xor: using function: arm64_neon (12067 MB/sec)
[    2.461930] Key type asymmetric registered
[    2.461933] Asymmetric key parser 'x509' registered
[    2.461947] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 242)
[    2.461991] io scheduler mq-deadline registered
[    2.461996] io scheduler kyber registered
[    2.462366] rockchip-csi2-dphy-hw fedc0000.csi2-dphy0-hw: csi2 dphy hw probe successfully!
[    2.462554] rockchip-csi2-dphy csi2-dphy0: csi2 dphy0 probe successfully!
[    2.469993] rockchip-hdptx-phy-hdmi fed60000.hdmiphy: hdptx phy init success
[    2.471902] rk-pcie fe180000.pcie: invalid prsnt-gpios property in node
[    2.471924] rk-pcie fe180000.pcie: no vpcie3v3 regulator found
[    2.472026] rk-pcie fe150000.pcie: invalid prsnt-gpios property in node
[    2.472055] rk-pcie fe180000.pcie: missing legacy IRQ resource
[    2.472066] rk-pcie fe180000.pcie: IRQ msi not found
[    2.472069] rk-pcie fe180000.pcie: use outband MSI support
[    2.472073] rk-pcie fe180000.pcie: Missing *config* reg space
[    2.472079] rk-pcie fe180000.pcie: host bridge /pcie@fe180000 ranges:
[    2.472106] rk-pcie fe180000.pcie:      err 0x00f3000000..0x00f30fffff -> 0x00f3000000
[    2.472111] rk-pcie fe170000.pcie: invalid prsnt-gpios property in node
[    2.472116] rk-pcie fe180000.pcie:       IO 0x00f3100000..0x00f31fffff -> 0x00f3100000
[    2.472132] rk-pcie fe180000.pcie:      MEM 0x00f3200000..0x00f3ffffff -> 0x00f3200000
[    2.472139] rk-pcie fe180000.pcie:      MEM 0x09c0000000..0x09ffffffff -> 0x09c0000000
[    2.472141] rk-pcie fe170000.pcie: no vpcie3v3 regulator found
[    2.472167] rk-pcie fe180000.pcie: Missing *config* reg space
[    2.472190] rk-pcie fe180000.pcie: invalid resource
[    2.472252] pwm-backlight backlight: supply power not found, using dummy regulator
[    2.472260] rk-pcie fe170000.pcie: missing legacy IRQ resource
[    2.472267] rk-pcie fe170000.pcie: IRQ msi not found
[    2.472270] rk-pcie fe170000.pcie: use outband MSI support
[    2.472274] rk-pcie fe170000.pcie: Missing *config* reg space
[    2.472279] rk-pcie fe170000.pcie: host bridge /pcie@fe170000 ranges:
[    2.472296] rk-pcie fe170000.pcie:      err 0x00f2000000..0x00f20fffff -> 0x00f2000000
[    2.472303] rk-pcie fe170000.pcie:       IO 0x00f2100000..0x00f21fffff -> 0x00f2100000
[    2.472310] rk-pcie fe170000.pcie:      MEM 0x00f2200000..0x00f2ffffff -> 0x00f2200000
[    2.472315] rk-pcie fe170000.pcie:      MEM 0x0980000000..0x09bfffffff -> 0x0980000000
[    2.472336] rk-pcie fe170000.pcie: Missing *config* reg space
[    2.472358] rk-pcie fe170000.pcie: invalid resource
[    2.472393] mpp_service mpp-srv: 0a62e4a3751f author: ZiHan Huang 2022-05-17 Revert "video: rockchip: mpp: write a sem around session dma operations"
[    2.472398] mpp_service mpp-srv: probe start
[    2.473368] mpp_vdpu2 fdb50400.vdpu: Adding to iommu group 1
[    2.473562] mpp_vdpu2 fdb50400.vdpu: probe device
[    2.473649] mpp_vdpu2 fdb50400.vdpu: reset group is empty!
[    2.473654] vdpu_init:501: No aclk reset resource define
[    2.473658] mpp_vdpu2 fdb50400.vdpu: reset group is empty!
[    2.473661] vdpu_init:504: No hclk reset resource define
[    2.473728] mpp_vdpu2 fdb50400.vdpu: probing finish
[    2.473889] mpp_vepu2 jpege-ccu: probing start
[    2.473894] mpp_vepu2 jpege-ccu: probing finish
[    2.473980] mpp_vepu2 fdba0000.jpege-core: Adding to iommu group 5
[    2.474103] mpp_vepu2 fdba0000.jpege-core: probing start
[    2.474186] mpp_vepu2 fdba0000.jpege-core: attach ccu success
[    2.474248] mpp_vepu2 fdba0000.jpege-core: probing finish
[    2.474323] mpp_vepu2 fdba4000.jpege-core: Adding to iommu group 6
[    2.474445] mpp_vepu2 fdba4000.jpege-core: probing start
[    2.474521] mpp_vepu2 fdba4000.jpege-core: attach ccu success
[    2.474577] mpp_vepu2 fdba4000.jpege-core: probing finish
[    2.474650] mpp_vepu2 fdba8000.jpege-core: Adding to iommu group 7
[    2.474776] mpp_vepu2 fdba8000.jpege-core: probing start
[    2.474852] mpp_vepu2 fdba8000.jpege-core: attach ccu success
[    2.474909] mpp_vepu2 fdba8000.jpege-core: probing finish
[    2.474994] mpp_vepu2 fdbac000.jpege-core: Adding to iommu group 8
[    2.475123] mpp_vepu2 fdbac000.jpege-core: probing start
[    2.475200] mpp_vepu2 fdbac000.jpege-core: attach ccu success
[    2.475258] mpp_vepu2 fdbac000.jpege-core: probing finish
[    2.475480] mpp-iep2 fdbb0000.iep: Adding to iommu group 9
[    2.475606] mpp-iep2 fdbb0000.iep: probe device
[    2.475716] mpp-iep2 fdbb0000.iep: allocate roi buffer failed
[    2.475759] mpp-iep2 fdbb0000.iep: probing finish
[    2.475926] mpp_jpgdec fdb90000.jpegd: Adding to iommu group 4
[    2.476122] mpp_jpgdec fdb90000.jpegd: probe device
[    2.476267] mpp_jpgdec fdb90000.jpegd: probing finish
[    2.476560] mpp_rkvdec2 fdc30000.rkvdec-ccu: rkvdec-ccu, probing start
[    2.476603] mpp_rkvdec2 fdc30000.rkvdec-ccu: probing finish
[    2.476662] mpp_rkvdec2 fdc38100.rkvdec-core: Adding to iommu group 12
[    2.476902] mpp_rkvdec2 fdc38100.rkvdec-core: rkvdec-core, probing start
[    2.476995] mpp_rkvdec2 fdc38100.rkvdec-core: shared_niu_a is not found!
[    2.476999] rkvdec2_init:697: No niu aclk reset resource define
[    2.477003] mpp_rkvdec2 fdc38100.rkvdec-core: shared_niu_h is not found!
[    2.477006] rkvdec2_init:700: No niu hclk reset resource define
[    2.477062] mpp_rkvdec2 fdc38100.rkvdec-core: core_mask=00010001
[    2.477066] mpp_rkvdec2 fdc38100.rkvdec-core: attach ccu as core 0
[    2.477175] mpp_rkvdec2 fdc38100.rkvdec-core: sram_start 0x00000000fd601000
[    2.477179] mpp_rkvdec2 fdc38100.rkvdec-core: rcb_iova 0x0000000010000000
[    2.477182] mpp_rkvdec2 fdc38100.rkvdec-core: sram_size 491520
[    2.477186] mpp_rkvdec2 fdc38100.rkvdec-core: rcb_size 1048576
[    2.477190] mpp_rkvdec2 fdc38100.rkvdec-core: min_width 512
[    2.477211] mpp_rkvdec2 fdc38100.rkvdec-core: probing finish
[    2.477324] mpp_rkvdec2 fdc48100.rkvdec-core: Adding to iommu group 13
[    2.477537] mpp_rkvdec2 fdc48100.rkvdec-core: rkvdec-core, probing start
[    2.477625] mpp_rkvdec2 fdc48100.rkvdec-core: shared_niu_a is not found!
[    2.477629] rkvdec2_init:697: No niu aclk reset resource define
[    2.477633] mpp_rkvdec2 fdc48100.rkvdec-core: shared_niu_h is not found!
[    2.477636] rkvdec2_init:700: No niu hclk reset resource define
[    2.477678] mpp_rkvdec2 fdc48100.rkvdec-core: core_mask=00020002
[    2.477694] mpp_rkvdec2 fdc48100.rkvdec-core: attach ccu as core 1
[    2.477830] mpp_rkvdec2 fdc48100.rkvdec-core: sram_start 0x00000000fd679000
[    2.477834] mpp_rkvdec2 fdc48100.rkvdec-core: rcb_iova 0x0000000010100000
[    2.477837] mpp_rkvdec2 fdc48100.rkvdec-core: sram_size 487424
[    2.477841] mpp_rkvdec2 fdc48100.rkvdec-core: rcb_size 1048576
[    2.477845] mpp_rkvdec2 fdc48100.rkvdec-core: min_width 512
[    2.477867] mpp_rkvdec2 fdc48100.rkvdec-core: probing finish
[    2.478008] mpp_rkvenc2 rkvenc-ccu: probing start
[    2.478012] mpp_rkvenc2 rkvenc-ccu: probing finish
[    2.478101] mpp_rkvenc2 fdbd0000.rkvenc-core: Adding to iommu group 10
[    2.478280] mpp_rkvenc2 fdbd0000.rkvenc-core: probing start
[    2.478294] mpp_rkvenc2 fdbd0000.rkvenc-core: link mode task capacity 8
[    2.478417] mpp_rkvenc2 fdbd0000.rkvenc-core: attach ccu as core 0
[    2.478485] mpp_rkvenc2 fdbd0000.rkvenc-core: probing finish
[    2.478532] mpp_rkvenc2 fdbe0000.rkvenc-core: Adding to iommu group 11
[    2.478734] mpp_rkvenc2 fdbe0000.rkvenc-core: probing start
[    2.478747] mpp_rkvenc2 fdbe0000.rkvenc-core: link mode task capacity
[14:15:14.309]收←◆8
[    2.478882] mpp_rkvenc2 fdbe0000.rkvenc-core: attach ccu as core 1
[    2.478947] mpp_rkvenc2 fdbe0000.rkvenc-core: probing finish
[    2.479378] mpp_av1dec: Adding child /av1d@fdc70000
[    2.479556] mpp_av1dec: register device av1d-master
[    2.479570] mpp_av1dec av1d-master: av1_iommu_of_xlate,784
[    2.479586] av1_iommu_probe_device,737, consumer : av1d-master, supplier : fdca0000.iommu
[    2.479593] mpp_av1dec av1d-master: Adding to iommu group 18
[    2.479806] mpp_av1dec av1d-master: probing start
[    2.479971] mpp_av1dec av1d-master: probing finish
[    2.479996] mpp_service mpp-srv: probe success
[    2.487716] dma-pl330 fea10000.dma-controller: Loaded driver for PL330 DMAC-241330
[    2.487723] dma-pl330 fea10000.dma-controller:         DBUFF-128x8bytes Num_Chans-8 Num_Peri-32 Num_Events-16
[    2.488376] dma-pl330 fea30000.dma-controller: Loaded driver for PL330 DMAC-241330
[    2.488382] dma-pl330 fea30000.dma-controller:         DBUFF-128x8bytes Num_Chans-8 Num_Peri-32 Num_Events-16
[    2.489053] dma-pl330 fed10000.dma-controller: Loaded driver for PL330 DMAC-241330
[    2.489059] dma-pl330 fed10000.dma-controller:         DBUFF-128x8bytes Num_Chans-8 Num_Peri-32 Num_Events-16
[    2.489886] rockchip-pvtm fda40000.pvtm: pvtm@0 probed
[    2.489932] rockchip-pvtm fda50000.pvtm: pvtm@1 probed
[    2.489972] rockchip-pvtm fda60000.pvtm: pvtm@2 probed
[    2.490011] rockchip-pvtm fdaf0000.pvtm: pvtm@3 probed
[    2.490051] rockchip-pvtm fdb30000.pvtm: pvtm@4 probed
[    2.490464] rockchip-system-monitor rockchip-system-monitor: system monitor probe
[    2.491113] Serial: 8250/16550 driver, 10 ports, IRQ sharing disabled
[    2.491535] febb0000.serial: ttyS8 at MMIO 0xfebb0000 (irq = 97, base_baud = 1500000) is a 16550A
[    2.492484] random: fast init done
[    2.492573] random: crng init done
[    2.493029] rockchip-vop2 fdd90000.vop: Adding to iommu group 17
[    2.498200] rockchip-vop2 fdd90000.vop: [drm:vop2_bind] vp0 assign plane mask: 0x5, primary plane phy id: 2
[    2.498210] rockchip-vop2 fdd90000.vop: [drm:vop2_bind] vp1 assign plane mask: 0xa, primary plane phy id: 3
[    2.498228] rockchip-vop2 fdd90000.vop: [drm:vop2_bind] vp2 assign plane mask: 0x140, primary plane phy id: 8
[    2.498236] rockchip-vop2 fdd90000.vop: [drm:vop2_bind] vp3 assign plane mask: 0x280, primary plane phy id: 9
[    2.498251] rockchip-vop2 fdd90000.vop: failed to get hdmi1_phy_pll: -517
[    2.498426] [drm] failed to init overlay plane Cluster0-win1
[    2.498452] [drm] failed to init overlay plane Cluster1-win1
[    2.498478] [drm] failed to init overlay plane Cluster2-win1
[    2.498502] [drm] failed to init overlay plane Cluster3-win1
[    2.510242] rockchip-drm display-subsystem: bound fdd90000.vop (ops 0xffffffc0113eb018)
[    2.510717] dwhdmi-rockchip fde80000.hdmi: registered ddc I2C bus driver
[    2.510862] rockchip-drm display-subsystem: bound fde80000.hdmi (ops 0xffffffc0113f4470)
[    2.510919] rockchip-drm display-subsystem: bound fde50000.dp (ops 0xffffffc0113f6a88)
[    2.511166] rockchip-drm display-subsystem: failed to parse loader memory

[14:15:14.377]收←◆[    2.615635] dwhdmi-rockchip fde80000.hdmi: i2c read time out!

[14:15:14.444]收←◆[    2.676728] rk-pcie fe180000.pcie: PCIe Linking... LTSSM is 0x3
[    2.683394] rk-pcie fe170000.pcie: PCIe Linking... LTSSM is 0x3

[14:15:14.501]收←◆[    2.702289] rk-pcie fe180000.pcie: PCIe Linking... LTSSM is 0x3
[    2.708958] rk-pcie fe170000.pcie: PCIe Linking... LTSSM is 0x3
[    2.722289] dwhdmi-rockchip fde80000.hdmi: i2c read time out!
[    2.728959] rk-pcie fe180000.pcie: PCIe Linking... LTSSM is 0x3
[    2.738955] rk-pcie fe170000.pcie: PCIe Linking... LTSSM is 0x3
[    2.755622] rk-pcie fe180000.pcie: PCIe Linking... LTSSM is 0x3
[    2.765621] rk-pcie fe170000.pcie: PCIe Linking... LTSSM is 0x3

[14:15:14.557]收←◆[    2.782289] rk-pcie fe180000.pcie: PCIe Linking... LTSSM is 0x3
[    2.795621] rk-pcie fe170000.pcie: PCIe Linking... LTSSM is 0x3

[14:15:14.591]收←◆[    2.828955] dwhdmi-rockchip fde80000.hdmi: i2c read time out!

[14:15:14.696]收←◆[    2.935621] dwhdmi-rockchip fde80000.hdmi: i2c read time out!

[14:15:14.803]收←◆[    3.042288] dwhdmi-rockchip fde80000.hdmi: i2c read time out!
[    3.042300] dwhdmi-rockchip fde80000.hdmi: failed to get edid

[14:15:16.189]收←◆[    3.152288] dwhdmi-rockchip fde80000.hdmi: i2c read time out!
[    3.255621] dwhdmi-rockchip fde80000.hdmi: i2c read time out!
[    3.358954] dwhdmi-rockchip fde80000.hdmi: i2c read time out!
[    3.462288] dwhdmi-rockchip fde80000.hdmi: i2c read time out!
[    3.568954] dwhdmi-rockchip fde80000.hdmi: i2c read time out!
[    3.568961] dwhdmi-rockchip fde80000.hdmi: failed to get edid
[    3.569021] dwhdmi-rockchip fde80000.hdmi: use tmds mode
[    3.569053] rockchip-vop2 fdd90000.vop: [drm:vop2_crtc_atomic_enable] Update mode to 1920x1080p60, type: 11(if:800) for vp0 dclk: 148500000
[    3.569201] rockchip-vop2 fdd90000.vop: [drm:vop2_crtc_atomic_enable] dclk_out0 div: 0 dclk_core0 div: 2
[    3.569219] rockchip-hdptx-phy-hdmi fed60000.hdmiphy: hdptx_ropll_cmn_config bus_width:16a8c8 rate:1485000
[    3.569492] rockchip-hdptx-phy-hdmi fed60000.hdmiphy: hdptx phy pll locked!
[    3.569496] rockchip-vop2 fdd90000.vop: [drm:vop2_crtc_atomic_enable] set dclk_vop0 to 148500000, get 148500000
[    3.569515] dwhdmi-rockchip fde80000.hdmi: final tmdsclk = 148500000
[    3.569518] rockchip-hdptx-phy-hdmi fed60000.hdmiphy: bus_width:0x16a8c8,bit_rate:1485000
[    3.569712] rockchip-hdptx-phy-hdmi fed60000.hdmiphy: hdptx phy lane locked!
[    3.569732] dwhdmi-rockchip fde80000.hdmi: don't use dsc mode
[    3.778954] dwhdmi-rockchip fde80000.hdmi: dw hdmi qp use tmds mode
[    3.786242] dwhdmi-rockchip fde80000.hdmi: use tmds mode
[    3.908955] dwhdmi-rockchip fde80000.hdmi: i2c read time out!
[    4.015621] dwhdmi-rockchip fde80000.hdmi: i2c read time out!
[    4.122287] dwhdmi-rockchip fde80000.hdmi: i2c read time out!
[    4.228954] dwhdmi-rockchip fde80000.hdmi: i2c read time out!
[    4.335623] dwhdmi-rockchip fde80000.hdmi: i2c read time out!
[    4.335629] dwhdmi-rockchip fde80000.hdmi: failed to get edid
[    4.335667] dwhdmi-rockchip fde80000.hdmi: use tmds mode
[    4.336274] dwhdmi-rockchip fde80000.hdmi: use tmds mode
[    4.377780] Console: switching to colour frame buffer device 240x67
[    4.377851] dwhdmi-rockchip fde80000.hdmi: use tmds mode
[    4.411239] rockchip-drm display-subsystem: [drm] fb0: rockchipdrmfb frame buffer device

[14:15:17.168]收←◆[    5.405621] rk-pcie fe180000.pcie: PCIe Link Fail
[    5.405628] rk-pcie fe180000.pcie: failed to initialize host


回复

使用道具 举报

jefferyzhang

版主

积分
12953
沙发
发表于 2023-4-4 14:29:34 | 只看该作者
rk-pcie fe180000.pcie: PCIe Link Fail
[    5.405628] rk-pcie fe180000.pcie: failed to initialize host

你们自己做的底板电路有问题,pcie起不来,这个不行就驱动里自己关掉下试试
回复

使用道具 举报

gggg

注册会员

积分
82
板凳
 楼主| 发表于 2023-4-4 14:32:17 | 只看该作者
jefferyzhang 发表于 2023-4-4 14:29
rk-pcie fe180000.pcie: PCIe Link Fail
[    5.405628] rk-pcie fe180000.pcie: failed to initialize ho ...

好的,十分感谢
回复

使用道具 举报

gggg

注册会员

积分
82
地板
 楼主| 发表于 2023-4-4 16:20:55 | 只看该作者
jefferyzhang 发表于 2023-4-4 14:29
rk-pcie fe180000.pcie: PCIe Link Fail
[    5.405628] rk-pcie fe180000.pcie: failed to initialize ho ...

请问下能否告知下uboot怎么禁用pcie自检
回复

使用道具 举报

jefferyzhang

版主

积分
12953
5#
发表于 2023-4-4 16:31:54 | 只看该作者
gggg 发表于 2023-4-4 16:20
请问下能否告知下uboot怎么禁用pcie自检

你这是卡在kernel,不是在uboot
回复

使用道具 举报

您需要登录后才可以回帖 登录 | 立即注册

本版积分规则

产品中心 购买渠道 开源社区 Wiki教程 资料下载 关于Toybrick


快速回复 返回顶部 返回列表