RX3588刷写编译出来的官方固件无法启动

使用RX3588X开发板，源码路径GitHub - rockchip-toybrick/edge编译uboot，kernel，使用原有的rootfs.img刷写进去后，系统启动失败，编译过程入下：./edge set
./edge build -u
./edge build -k
./edge build -p
使用loader模式刷写out/rk3588/TB-RK3588X0/images下的镜像
启动后报错如下：
[    5.434036] pwr       0x014c: 0000e83b 00002411 00000000 00000000
[    5.434578] status    0x0180: 2411e83b 00000000 00000000 00000000
[    5.435120] req       0x010c: 00001c0f 0000000a 00000000 000a1c0f
[    5.435661] idle      0x0120: 000a1c0f 00000000 0000ffff 0000ffff
[    5.436202] ack       0x0118: 000a1c0f 00000000 000a1c0f 00000000
[    5.436744] mem_pwr   0x01a0: 00000000 00000000 00000000 00000000
[    5.437284] chain_st  0x01f0: ee17c4ff 000003db 11e83b00 00000024
[    5.437825] mem_st    0x01f8: 11e83b00 00000024 00000203 0000ffff
[    5.438366] repair_st 0x0290: faf70be1 000381ff 00000000 00000000
[    5.438912] rockchip-thermal fec00000.tsadc: channal 0: temperature(32 C)
[    5.439513] THERMAL REGS:
[    5.439763] 00000000: 00000100 00000001 0000000c 0000007f 00000000 00000001 00000000 0000007f
[    5.440516] 00000020: 00000000 0000007e 00000000 00000124 00000124 00000125 00000124 00000125
[    5.441268] 00000040: 00000124 00000124 00000000 00000000 00000000 00000000 00000000 00000000
[    5.442021] 00000060: 00000000 00000000 00000000 00000153 00000000 00000000 00000000 00000000
[    5.442767] 00000080: 00000000 00000000
[    5.443110] Kernel Offset: disabled
[    5.443421] CPU features: 0x000,48000026,6a00aa18
[    5.443842] Memory Limit: none
[    5.444129] cpu cpu6: cur_freq: 408000000 Hz, volt_vdd: 675000 uV, volt_mem: 675000 uV
[    5.444832] cpu cpu4: cur_freq: 408000000 Hz, volt_vdd: 675000 uV, volt_mem: 675000 uV
[    5.445534] cpu cpu0: cur_freq: 816000000 Hz, volt_vdd: 675000 uV, volt_mem: 675000 uV
[    5.446238] rockchip-dmc dmc: cur_freq: 2112000000 Hz, volt_vdd: 850000 uV, volt_mem: 750000 uV
[    5.476983] ---[ end Kernel panic - not syncing: No working init found.  Try passing init= option to kernel. See Linux Documentation/admin-guide/init.rst for guidance. ]---

像是根文件系统未挂载成功，查看boot分区的extlinux配置文件的UUID没错

发下完整的log启动信息

回退SDK版本后启动正常，回退到34f18201bf86f9bf410b46cc29e2ae70c8cc99af版本即可，希望官方能尽快修复bug